Simple guide on how to reshaft a golf club
- Use a paper-knife. To reshaft a golf club, you must first scrape off the metal tube at the bottom of Hosel. ...
- Use the lift bar to push into the base of the Hosel. Before you can replace a damaged shaft, the clubhead must be separated from the old one. ...
- Remove the paint from the replacement. ...
- Take the Epoxy adhesive. ...
- Remove the Grip on the shaft. ...
How to reshaft a golf driver?
How to Reshaft a Golf Driver. 1 Step 1. Prepare the tip of the new driver shaft by scraping the paint and polyurethane off with a sharp knife. Make sure you don't cut in to the shaft ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
How do I choose the right shaft for my golf club?
Try a new shaft on your golf club. It's an inexpensive way to learn which kind fits you best. The right shaft can improve your game. Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. Tighten the STSL in a vise.
Where can I get a shaft removed from my golf clubs?
If in doubt, visit your local Golf Galaxy retail store for advice. Graphite Shafts: To remove a graphite shaft, place the shaft in a graphite shaft extractor following the instructions that came with the tool.
How do you install a ferrule on a club shaft?
If a ferrule is to be installed, slide the ferrule up the shaft, and then mix the epoxy. Dip the tip of the shaft into the mixed epoxy, making sure that a small glob of epoxy remains on the tip. Insert the shaft into the club head's hosel. Rotate the shaft while sliding it in and out of the hosel, evenly coating the shaft and hosel with epoxy.
How much does it cost to re shaft a golf club?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
Is it easy to Reshaft irons?
Golf irons can be a bit easier to reshaft than a driver. If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project.
Is it worth it to Reshaft golf clubs?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How do you shaft a golf club?
4:297:38How to Install Graphite Golf Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel.MoreThe butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel. Remove the head and place some epoxy inside the hosel dip the tip of the shaft into the epoxy mix.
How much does it cost to get a driver Reshafted?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
Can you switch shafts on irons?
Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.
How often should you re shaft irons?
Unless you are playing extremely irregularly, you should be replacing your irons every five years to make sure you are getting the most out of them.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
Do graphite shafts increase distance?
Graphite shafts are lighter than steel shafts, resulting in an increase in swing speed and distance. This is particularly beneficial to players with slow swing tempos.
How do you Reshaft a driver at home?
0:144:53How To Reshaft Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tipMoreHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tip taken basically the paint off the shaft that way to here to the epoxy.
How much does it cost to Reshaft a golf club UK?
Iron RepairsReshaftTrue TemperLoft & Lie From}£4.50 } per club}Lead Tape, 1 Yard£4.00Re-fit Loose HeadFrom £8.5020 more rows
Can you reuse golf shafts?
However, if the shaft tip stays intact, take a closer inspection of the tip section to see if you notice any longitudinal cracks or delaminating, or basically anything that you think would be considered damage. If not, there is a good chance you could reuse the shaft into another head or the same head later on.
What do I need to Reshaft an iron?
2:5922:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the shafts you don't need a shaft puller. Anything like that you can just heat them up andMorePull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
How much does it cost to Reshaft a golf club UK?
Iron RepairsReshaftTrue TemperLoft & Lie From}£4.50 } per club}Lead Tape, 1 Yard£4.00Re-fit Loose HeadFrom £8.5020 more rows
Can you Reshaft a broken iron?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
How is the importance of golf shafts?
There are a lot of details to consider when choosing the right shaft for your club.
Simple guide on how to reshaft a golf club
Have you ever wanted to replace your golf shaft at home? If so, make sure to read the instructions for use and know how best to do it. Here are some easy technical tutorials that can help!
Conclusion
With some basic knowledge on how to reshaft a golf club, you’ll be able to save hundreds of dollars.
Step 1: Heat the area connecting the club head to the shaft
Take your golf club and heat the area connecting the club head to the shaft. For instance, you can use a heat gun to accomplish this.
Step 2: Remove the club head from the old shaft
Avoiding the hot areas, pull on the golf club head while holding the shaft in your other hand. You can also secure the head or shaft in a vice, and pull on the other end carefully.
Step 3: Poke a hole in the grip tape of the new shaft
Make sure there is air passing through the end of the grip on the new shaft. When you push the golf club head onto the new shaft, air push back towards the back of the shaft. If there is no way for the air to escape, the air will push back on the club head, and tend to push it off the shaft.
Step 4: Prep the new golf club shaft
Place your club head on the new shaft and mark for far down the shaft the club head goes. Mark the spot with a marker or tape. Then, remove the club head. Next, sand down the small section of the shaft that you marked earlier.
Step 5: Clean the golf club head
You need to clean the old glue out of the golf club head. If the glue is not too hard, you can use a cotton swab to clean the residual glue. Another option you can try to use to clean the club head is a wire brush. Stick it in the club head and scrub the glue off.
Step 6: Mix the epoxy glue
Epoxy glue usually comes in two separate solutions that you need to mix before use.
Step 7: Apply the epoxy into the golf club head and on the shaft
Now that your epoxy is solution is mixed, use a cotton swap or a toothpick to apply epoxy into your golf club head.
Instructions
Place the shaft in a vise and tighten it, if your shaft is made of steel. If it has a plastic ferrule, prevent it from burning by wrapping it in a wet paper towel. Put on a pair of gloves that protect from high heat, and heat the hosel of the clubhead with a heat gun for about 30 seconds. Then remove it from the shaft by twisting it.
About the Author
Bill Herrfeldt specializes in finance, sports and the needs of retiring people, and has been published in the national edition of "Erickson Tribune," the "Washington Post" and the "Arizona Republic." He graduated from the University of Louisville.
What does a new shaft do for a driver?
A new shaft can put the wallop back in your trusty driver and have it hitting like a brand-new club. One of the nice things about replacing a driver shaft is that there is generally no tip trimming involved.
How to secure a ferrule on a golf club?
To do this, place a small amount of epoxy on the inside of the ferrule and slide the ferrule onto the shaft, narrow end first. Place your clubhead on top of the ferrule and place the grip end of the club on the floor. Butt down the grip while pushing down on the clubhead to secure the ferrule at the correct depth on the hosel.
How to mix shaft epoxy?
Mix your shaft epoxy on a piece of cardboard with a craft stick. Professional shaft epoxy comes in two parts; mix them together according to the instructions on the epoxy bottles.
