Golf clubs that you purchase from a store will range from 32″ for a putter to up to 48″ for a driver. However, different golfer heights affect what size of clubs you need. How To Pick Golf Club Size? Using your height and then your wrist to floor measurements is a great way to get an idea of what the right length of clubs will be.
Should you measure yourself for a new set of golf clubs?
If you decide to measure yourself for a new set of clubs based on height, learn about the standard heights for each club and add half an inch up to two inches in shaft length, based on the manufacturer’s sizing chart and recommendations.
Why do golf clubs have different lengths?
Let’s go over each individual type and talk about the reason behind their lengths. Your driver is technically your most important club. These tend to be somewhere in between your woods and your wedges, and it’s for a very simple reason. More momentum.
What is the standard length of a golf club?
Standard driver length at retail varies from 45” to 46”. It is aimed at helping amateurs gain speed compared to what’s used on Tour. Longer and lighter shafts. World Long Drive (WLD) club lengths are mostly 48” to 50”, depending on measuring technique.
What should I look for in a golf club fitting?
Player height is the first thing to look at in a club fitting and there are brackets that recommend lengths based on this. This is normally considered before hitting any golf balls in a Static Fit. Most brands will supply the businesses that sell their equipment with charts and tables to find you the ideal length.
How do you tell what size a golf club is?
A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club's heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
What are the different size golf clubs?
The Complete Golf Club Length ChartGOLF CLUBLENGTH FOR MEN (steel/graphite shaft)LENGTH FOR WOMEN (steel/graphite shaft)2-iron39.5/40 inches38.5/39 inches3-iron39/39.5 inches38/38.5 inches4-iron38.5/39 inches37.5/38 inches5-iron38/38.5 inches37/37.5 inches23 more rows
How do you tell the difference between golf clubs?
Irons range from a 1-iron to a 9-iron and as with fairway woods, the higher the clubhead number, the shorter the shot. The higher the number, the higher the loft as well. A standard set of clubs comes with 5-7 irons—usually, the 3-iron to the 9-iron but some golfers carry 1- and 2-irons.
How do you know which golf club is which?
IRONS2-iron = 105 to 210 yards.3-iron = 100 to 205 yards.4-iron = 90 to 190 yards.5-iron = 80 to 175 yards.6-iron = 70 to 165 yards.7-iron = 65 to 155 yards.8-iron = 60 to 145 yards.9-iron = 55 to 135 yards.
What does XL mean in golf clubs?
Golf Clubs With respect to drivers, XL again stands for “extra long,” and again refers to the distance the driver is supposed to achieve, rather than the club's length -- although the term may have a double meaning for a 48-inch driver, which is the longest allowed under the Rules of Golf.
What do golf clubs numbers mean?
Adjusting the loft adjusts the height or distance the ball can travel on impact. The lower the number on the golf club, the lower the loft. This means the angle on the clubface is less intense, making the golf ball travel further but at a lower height. A higher club number would mean a higher loft.
What does G mean on a golf club?
0:432:04Golf Tips : How to Use a Golf Gap Wedge - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a shot that you hit similarly to a stand full sand wedge or a pitching wedge. Your hands are inMoreIt's a shot that you hit similarly to a stand full sand wedge or a pitching wedge. Your hands are in front of the ball. The ball is towards the back of your stance.
How can you tell the difference between a 6 and 9-iron?
6-iron = 150 yards. 7-iron = 140 yards. 8-iron = 130 yards. 9-iron = 120 yards.
What does W mean on a golf club?
The term "pitching wedge" is now used by virtually all manufacturers and players to describe this club; Karsten Manufacturing (maker of the PING brand) simply labels their pitching wedges "W" for "wedge".
How far should you hit a 7 iron?
Average 7 Iron Distance By AgeAge RangeAverage 7 Iron Distance20-30160 yards30-40155 yards40-50146 yards50-60139 yards2 more rows
What is the easiest golf club to hit?
On average the easiest golf club to hit is the 7-iron. 6-irons and 8-irons come close because these mid-iron clubs deliver high launch angles for all standards and their appearance gives confidence when players look down at them.
How far should you hit a 4 iron?
154 yards4 iron: 154 yards. 5 iron: 147 yards. 6 iron: 139 yards.
Choosing Golf Clubs According to Your Height
Both players who are shorter and taller than the average height require the proper golf clubs for them. Otherwise, they will not be able to perform their best on the course. You can refer to the sizing chart below to identify the ideal length of golf club to use.
Club Selection Using Your Wrist-to-Floor (WTF) Measurement
Aside from your height, wrist-to-floor or WTF measurements are commonly used to determine your correct club size. For this method, you just have to stand with your feet together in normal shoes, with your arms hanging straight down and relaxed.
What Are Standard Length Golf Clubs?
Standard length golf clubs are ideal for players with the average height and WTF measurement. These clubs would usually fit in the 34-inch to 35.5-inch range.
Benefits Of The Accurate Golf Club Size
There is a wide range of advantages when you are able to pick the appropriate club size for you. This includes staying connected in the golf swing much more easily and hitting the ball from the correct lie angle. Both of these perks will help you achieve a better handicap score.
Solid Contact
With the proper club size, you will be able to hit your shots with the correct length club, allowing you to get good contact on your swings. This exact measurement can be of help to you when it comes to achieving consistent contact. It ensures that the face of the club is appropriately squared during impact.
Proper Lie Angle
In order for your swing to be more efficient, your lie angle should be matched to your golf club length according to your position with your club. This will improve your swings by making them more comfortable and consistent.
Lower Your Golf Handicap
By having more consistent golf shots with the aid of a rightsized club, you will be given a higher chance to improve your handicap. The golf handicap index is an official handicapping system that calculates the player’s scores from their previous rounds.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
What size golf clubs should I buy for a junior?
Golf club sizes for kids and juniors are shorter than the standard size of standard clubs. For a shorter junior, clubs will range from 20″ to 26″ in length and for a taller junior they will range from 42″ to 30″ in length from driver to putter.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
How to make your golf swing more efficient?
To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.
Who invented single length irons?
Single-length irons were introduced by Bryson Dechambeau and that has changed the way that people think of golf club sizes. A recommendation made by Bryson is that your entire iron range should be the same length as your 7 iron.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
What happens if your woods aren't longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why did Lars start golfing?
Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How to tell if a golf club is too long?
Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.
How long is a standard iron club?
Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.
How long is a golf driver?
On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
How long is a three wood putter?
Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.
Why is dynamic fit measuring more reliable?
The dynamic fit measuring technique is more reliable because the measurement is taken as a player swings a club with the help of a launch monitor. A launch monitor is used to determine the correct head and shaft that will best suit the golfer’s playing style.
Importance Of Perfect Length Of A Golf Club
A golfer’s performance undoubtedly depends very much on the perfect size of the golf club. What if they are too short? If your golf club is too short, it will allow the player to bend his back more, affecting his overall game. Not only will short golf clubs change the golfer’s stance, but they will also change his swing speed.
Methods To Measure The Golf Clubs Length
Many newbie golfers suffer from this question of what size golf club do I need?.
How Does Measuring The Club Impact Your Game?
Well, the answer is simple. Your game will become more prominent if you have a club that will accompany you in your swing. I have a clear explanation above that having a golf club according to your size and height will help you play more professionally .
Standard Fitting Of Golf Clubs
The golf association does not have any specific rule to measure the length of the Club. Custom fitting of golf clubs also has some methods of measurement. And you have to stay put to measure through them.
Conclusion
If you are into golf, you should know exactly what you have gotten into because this is not an economical and cheaper game. It takes an amount of money to play golf. So it will be wise to consume your money correctly and properly.
Frequently Asked Questions
Golf club sizes change according to your Size. By your Size, I mean your height. If you are on the taller side, you will need a taller club. Similarly, if you are on the shorter side, You will need a Club with a short length. You need to make sure that the Size of the Club matches your body type.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How many different types of golf clubs are there?
There are several different types of golf clubs in a typical golfer's bag. In fact, today, there are five categories of clubs: woods (including the driver), irons, hybrids, wedges and putters.
What is a wood golf club?
The category of golf clubs called "woods" includes the driver and the fairway woods. (They are called woods even though their clubheads are no longer made of wood.) The woods are the clubs with the largest heads (typically hollow, extending a few inches from side-to-side and a few inches from front to back, with rounded lines) ...
What is wedge golf?
The wedges are the highest-lofted golf clubs. They are used for shorter approach shots into greens, for chips and pitches around greens, and for playing out of sand bunkers.
What is the loft of an iron?
Irons have angled faces (called "loft") etched with grooves that help grip the golf ball and impart spin. They are generally used on shots from the fairway, or for tee shots on short holes. As the number of an iron goes up (5-iron, 6-iron, etc.), the loft increases while the length of the shaft decreases. Meet the Hybrids.
How long is a mallet putter?
Lengths: Standard-length putters, often referred to as "conventional putters," range from around 32 to 36 inches long, from one end to the other.
What is the difference between a heel toe and a mallet putter?
Heel-toe putters have the same general shape as blades , but with extra weight at the heel and toe to add perimeter weighting, and with other design tricks to help make the clubs more "forgiving" on mishits. Mallet putters have large clubheads that maximize that forgiveness of poor contact.
What are the names of old golf clubs?
Names of Old Golf Clubs. Golf clubs have changed quite a bit over the long history of the sport. There used to be clubs with names like mashie and niblick and jigger and spoon.
