Clean the grooves and sides of your wedge with a cloth dampened with mild soap and water. Use a brass brush if there is heavy corrosion on the shaft of the wedge. If you have replaced your wedge recently, make sure to give it a good scrubbing before using it again on the course.
Can You recondition wedges with a hand-held groove tool?
First, let me say that using a hand-held groove tool is a risky way to recondition the grooves in your wedges. The reason is that as soon as you alter (recondition) the face of the club it is considered new and ruled on accordingly.
How do you restore a wedge to its original performance?
This is the best way to restore a wedge to its original performance. However, it relies on slightly increasing the size of the grooves each time and can only be done o many times. Groove sharpeners are available for sale in many golf shops and online. These tools can sharpen the edges of your grooves.
How much does it cost to regrow grooves on wedges?
Wedges and irons can have their grooves professionally regrooved. This service ranges in price but usually is around $20 per club. This is the best way to restore a wedge to its original performance.
How to repair worn out golf clubs?
Sandpaper is a good way to repair worn out golf clubs temporarily. Firstly, wash the dirty grips with lukewarm water and soap to remove all the dirt and excess deposits from the grip. After drying the grip with a towel, use sandpaper to rough the grip up. You can use coarse sandpaper, but make sure that you don’t rub too hard on the paper.
Can you refurbish golf wedges?
Refurbishment involves removing scratches, dents and dings from the wedge head, sole, paint fill, and resharpening the grooves, either original or deep per the player's wishes. Not every wedge can be restored, as sometimes the damage is just too much to repair.
How do you restore a rusty golf wedge?
Similar to Coca-Cola, the acidity of Vinegar and Lemon Juice works to break down and remove rust. A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
How do you polish a golf wedge?
0:521:57How to Polish Golf clubs at Home | Best Way Clean Polish Golf ClubsYouTubeStart of suggested clipEnd of suggested clipThree polish your golf clubs using metal or car polish and a soft cloth. Let the Polish sit for aMoreThree polish your golf clubs using metal or car polish and a soft cloth. Let the Polish sit for a minute before completely wiping it away with a different cloth.
How do you tell if your wedges are worn out?
It's a basic test, but Briand suggests doing what's called the “fingernail test” on your wedge to get a quick idea of where your grooves are at. Run your nail down the face of the wedge and notice if your nail gets caught up in each groove. If it does, you're doing just fine in the groove department.
Do pros use Rusty wedges?
Rusty wedges appear in many a tour pro's bag. Sometimes, the rust is a result of a hard life spent splashing shots out of bunkers and pounding golf balls from the turf on ranges around the globe. But usually it is totally inentional.
Why do Vokey wedges rust?
The Jet Black will rust as the dark finish wears, while the Raw wedges will rust more quickly with exposure to air and moisture.
Can you use wd40 on golf clubs?
You can use WD-40 on golf clubs. It can be an effective way to remove rust and dirt from the head and shaft. It can also be used to remove the grip, acting as a solvent when you are applying a new one. Learning how to keep your golf clubs clean is vital.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
Can I use car polish on golf clubs?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.
How often should you get new wedges?
So if you are serious about your equipment, and want to maintain peak performance, it might make sense to consider swapping out your wedges every 12-36 months depending on how often you play, practice, and the durability of the material.
Can you sharpen your wedge grooves?
The answer is, yes, Golf groove sharpeners work to give your irons and wedges an increased spin rate.
Do older wedges spin less?
The older the wedge, the less it will likely spin at all distances. For that reason, I would suggest changing your wedges when you begin to see the initial effects of wear so you can keep your “grip” on the greens.
What to put on golf clubs to prevent rusting?
Wax. This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.
How to clean rust off golf clubs?
A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
Can a Cobra wedge rust?
Cobra Trusty Rusty Wedge. Leaving you’re club outside or even storing it in unfavorable conditions can result in rust. Contrary to popular belief, a little rust is not the end of the world. For some used clubs, especially wedges, some rust may even be beneficial. Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase ...
Can steel wool be used on golf clubs?
Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.
Does rust on a golf wedge increase spin?
Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
What is refinishing irons?
Refinishing Irons. The refurbishing process changes depending on your irons. If you play chrome-forged, carbon steel irons, you may want to rechrome them to bring back the luster of their original state. Most refurbishment jobs target performance, by repairing nicks, scratches and dents. Rechroming.
Can you use steel wool on a driver?
Warning: Never use steel wool on your driver and fairway wood club heads. It will scratch the crown and face, and be sure to dry the head completely to avoid oxidation. Steel wool bristle club cleaners are great at getting dirt and sand out of iron grooves, but never clean your driver with them. Let the club dry.
Is refurbishing a club difficult?
Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs. Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs.
Is rechroming a dangerous process?
The process involves stripping the chrome, reapplying chrome and painting the head. Materials used in the chroming process are dangerous and this method should be avoided by amateurs.
Sole and Toe Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We grind the sole and remove any damage and scratches. We then buff the area to bring back the shine. Please note that all orders that include refurbishment must be placed by phone.
Club face Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We polish the face and remove many of the cosmetic damage and scratches. We then buff the area to bring back the shine.
ADDITIONAL SERVICES
In addition to our refurbishment programs, we offer many additional customization services for your clubs. When your getting your clubs serviced, you might want to add on these services to increase the life of your new club.
How to clean golf clubs in a bag?
Run half of an old towel under warm water. Bring it outside. Use the wet end to clean each of the clubs in your bag and the other end to dry them.
How to clean a caddie yard?
Toss your clubs in a bucket filled with warm water. Snag a club-cleaning brush. Wet half a rag in the bucket and leave the other half dry. First, dunk a club in the water, then use the wet half of the rag to wipe the hosel, face and back.
How to clean a golf club after impact?
After cleaning the grooves, clean the back of the clubhead and sole of the iron to remove any grass, sand, or mud. After removing the mud, rinse off the clubhead with clean water.
How to keep golf clubs in good condition?
To keep the clubs in good condition, spray some water on the grips using a spray bottle. Spray the club at 3-4 times so the grips are wet enough. Once wet, dry the grips with a towel.
How to make a sandpaper grip rougher?
This would ensure that the grip is not damaged due to the rough surface of the sandpaper. Rub the sandpaper across the grip in up and down motions with a light hand. This would help in making the grip rougher. Don’t rub on the grip with a hard hand as you might end up sanding the grips off instead of making them tacky.
How to clean golf pride grips?
Simple method to clean the Golf Pride Grips: All you have to do is soak the grips in lukewarm water with cleaning detergent mixed in it. After dipping it in for some time, rinse the grips and dry them up with a towel. For detergent, you can use mild dishwashing detergent or any other mild cleaning agent.
How much does it cost to clean golf grips?
One of the best ways to clean golf grips is by using grip cleaning wipes that are available on the market for about $5.99.
What is the best way to clean golf clubs?
For cleaning and restoring golf club grips, soap and water can do the task pretty well. However, it is said that if the golf clubs grip becomes shiny and slippery, it is better to get them replaced. 200-grain sandpaper can be used to reduce the slipperiness of a golf grip as it removes the surface layer.
How to make leather grips tacky?
How to make leather golf grips tacky. To restore the tack on a leather golf club grip, you can use castor oil. It helps in restoring the tackiness of the golf grips quite easily. Applying a small amount, around 2-3 drops, will do the job pretty well. Vegetable oil can also be used to serve the same purpose.