Golf-FAQ.com

how to reduce iron golf swing

by Miss Corene Ernser II Published 3 years ago Updated 2 years ago
image

To work on it, make some less-than-full swings with a short iron where you do the opposite of what you might have heard when it comes to using a headcover under your trail arm as a training aid. Instead of holding it under there for the swing, start with it tucked there and make sure you drop it early in the backswing.

How to Change the Swing Weight of a Golf Club
  1. Add lead tape to your clubhead. This is the quickest and easiest method to increase swingweight. ...
  2. Place lead insert into the shaft at the grip end to reduce swingweight or add lead tape just below the grip. ...
  3. Change the club's shaft. ...
  4. Alter the club's grip.

Full Answer

What is the correct golf swing for Irons?

· Like many golf skills, the first step to hitting an iron pure is getting into the proper position, then developing a good swing– in this case, swinging down and into the ball on the downswing instead of scooping it up on the upswing. Practice your starting stance and your swing technique to hit your irons … More ›

How to build the perfect golf swing?

Three Keys To Help You Build the Perfect Golf Swing

  • Control Your Low Point
  • Control Your Start Line and Curve
  • Have Enough Distance To Play The Course

How do you start a golf swing?

What Golf Books Should I Read to Learn the Golf Swing Basics?

  • Ben Hogan’s Five Lessons
  • Golf is Not a Game of Perfect
  • Harvey Penick’s Little Red Book: Lessons and Teachings from a Lifetime in Golf
  • Kathey Whitworth’s Little Book of Golf Wisdom

How to hit irons for beginners?

  • Performs very much like hybrid irons
  • One of the best irons for beginners
  • Shallow cup forged face for high launch and distance
  • Low center of gravity

image

How do I make my iron spin less?

0:422:38REDUCE SPIN WITH YOUR IRONS (Handle First Drill) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour main objective is to get this handle to the left and it's going to get so you're almost goingMoreYour main objective is to get this handle to the left and it's going to get so you're almost going to feel like the handle gets down to impact first what that then does is because it's forward.

Why do I hit my iron shots so high?

The answer is to get the club more behind your body on the downswing, rather than casting it out across the line. This will create an inside-to-outside swing path, eliminating those high, weak cut shots. Work on starting the downswing with your hips, rather than the shoulders.

How do I make my iron swing smoother?

0:364:52How to Make a Smooth Golf Swing Instead of Hitting At the BallYouTubeStart of suggested clipEnd of suggested clipAnd let that swing flow through the ball. So I'm really just swinging to this point out here I'mMoreAnd let that swing flow through the ball. So I'm really just swinging to this point out here I'm letting the ball get completely in the way not trying to hit at the ball I'm swinging through the ball.

How do you hit low irons in golf?

2:506:39HOW TO PURE YOUR LONG IRONS - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have to control the attack angle. We have to have this starting. Position I want my attack angleMoreWe have to control the attack angle. We have to have this starting. Position I want my attack angle to be slightly descending. Slightly.

Why do all my golf shots go so high?

0:2011:10Why You Hit The Ball Too High - YouTubeYouTubeStart of suggested clipEnd of suggested clipSound. So if you're hitting your ball and it keeps going way too high just you don't have theMoreSound. So if you're hitting your ball and it keeps going way too high just you don't have the distance. You know maybe you slice the ball all of these things. You know are adding loft to your club.

How do I Deloft my irons?

5:0831:48The Pro's Guide To Delofting Your Irons | Compress The Ball - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd rotate around now i'm really exaggerating. Here this would be taking that club face and bring itMoreAnd rotate around now i'm really exaggerating. Here this would be taking that club face and bring it to outside of the club. That would be a big time snap hook if i really did.

Why do I struggle with my irons?

The main reason why a golfer can't hit their irons consistently is due to incorrect stance, poor contact with the ball, or using an iron that is too long or short for their height.

How do I simplify my golf swing?

8:119:47WATCH THIS If You're LOST With Your Golf Swing - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's going to keep you rotating. That's going to keep your weight shifting. Forward it's going toMoreThat's going to keep you rotating. That's going to keep your weight shifting. Forward it's going to look better as well it's like you're posing for a picture getting in that nice spot there.

Why do I struggle with long irons?

Chances are you are struggling with your long irons because your swing speed is not quite fast enough to be able to hit them properly. What is this? As we mentioned, the long irons have a low loft, and the clubs are longer. This requires more speed and great efficiency in the golf swing.

How do you compress an iron?

8:0938:32Start Compressing Your Irons Like The Pros With These Drills - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlayer we have to let the body build the momentum. And then the arms just add a little speed to it.MorePlayer we have to let the body build the momentum. And then the arms just add a little speed to it. So to get that momentum from the bottom from the body.Start Compressing Your Irons Like The Pros With These Drills - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you compress an iron?

How do you hit a 5 iron low?

0:372:02HOW TO HIT LOW IRON SHOTS-WHEN ITS BREEZY HIT IT ...YouTubeStart of suggested clipEnd of suggested clipYourself up a group slightly down the shaft. Okay just slightly down the shaft. Everything. Else isMoreYourself up a group slightly down the shaft. Okay just slightly down the shaft. Everything. Else is the same and it's a real good to stay in is when it's breezy swinging.HOW TO HIT LOW IRON SHOTS-WHEN ITS BREEZY HIT IT ...https://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you hit a 5 iron low?

How do you hit a low 4 iron?

1:164:59HOW TO HIT YOUR IRONS LOW - YouTubeYouTubeStart of suggested clipEnd of suggested clipConsiderably. Back in the start the iron. Good idea to aim slightly to the left. Okay. BecauseMoreConsiderably. Back in the start the iron. Good idea to aim slightly to the left. Okay. Because there's a good chance that when you contact that for the direction in your clubs.HOW TO HIT YOUR IRONS LOW - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you hit a low 4 iron?

How To Compress Your Iron Shots In Golf

It’s one of the most common questions asked by golfers – how do I compress my iron shots more?

So, What Is Compression?

If compression isn’t “squeezing the ball against the turf”, what is it?

How Do We Do It?

Have you ever noticed how almost every pro has a significant squatting motion into their left side close to the top of their swing?

More Info

Vertical spin loft is just one component – but a pretty big one – relating to compression with irons.

How to avoid steepness when swinging a long iron?

However, you don’t want your angle of attack to be as steep as it is when you’re hitting a short iron. In order to avoid that steepness, position the ball just slightly forward of center.

How to get a feel for swinging irons?

Take your iron setup without the golf ball. As you swing the club back, step the trail foot back and behind your body so it’s perpendicular to your lead foot. Then step the trail foot back into place as you swing through. This drill helps you get a feel for strong rotation and natural movement in the body.

How does the club head change direction?

Think of the shape your club head makes as you swing through the golf ball. As you move through the transition at the top of your swing , towards the ball , the club head is traveling at a downward angle. At some point (more specifically, at the low point), your club head changes direction.

What irons are considered long irons?

First, make sure you know which irons are considered “long” and which are “short.”. Your long irons (2, 3 and 4) have a lower loft and are designed for more distance. (1 irons if you have them) Short irons (8, 9 and pitching wedge) have a higher loft and help you pop the ball up in the air as you get closer to the green.

How to hit down on a golf ball?

To Hit Down on the Golf Ball: At setup, position the ball in the center of your stance. Shift your hands toward the target just slightly so the club is in front of the club head. In the transition, think about pulling on the club with your lead hand instead of throwing the club out and down with the trail hand.

What is the goal of an iron shot?

For an iron shot, however, the goal is to hit down on the golf ball. Another way to say this is that your moment of impact should occur before the low point of your golf swing. It’s important to make this distinction when discussing how to hit irons because this whole down/up thing trips up a lot of golfers.

How to get better at golf?

As you take your golf setup, allow your head to float up a bit instead of tucking your chin close to your chest. Stay relaxed in the neck and shoulders. As you swing away from the ball, allow your head to slide away from the target. This accommodates for better rotation, better speed, and a better shot.

What should your arm be behind the ball when swinging with an iron?

When swinging with an iron, the idea is to focus on descending blows, as well as a stacked position. This is to ensure adequate hand release and keep your wrists cocked at the point of release.

What is a golf iron?

Irons are the most commonly used golf clubs. They are highlighted by thin clubheads and a spin that is set at the clubface.

What is the most common golf club?

The iron is the most common and basic golf club that both beginners and experienced golfers can use. The swinging motion doesn’t significantly differ from the one when you are using a wood golf club. We did our best to run through the most important fundamentals.

What is the difference between a 3 iron and a pitching wedge?

Thus, the lower the number, the longer the golf club is. On the other hand, it has less loft but covers a bigger distance.

How many clubs are in a 3-iron wedge?

Today, it is most common to see a 3-iron pitching wedge that includes eight golf clubs. You should keep in mind that irons are always numbered and that irons 1 and 2 are virtually out of the game.

What do you need to know to be a golfer?

Being a golfer requires you to be physically and mentally prepared, as well as educated on the fundamentals of the game. Being aware of the physics and mechanics of a golf swing is essential. However, you also need to have knowledge of the different equipment that can be used. Bearing this in mind, there are a few different types of golf clubs, ...

How to do a downswing?

As you move towards the downswing, you should be keeping your left (front knee) in check. Make sure that it doesn’ t advance over the stick. The idea is that, during this motion, you should be opening your hips and turning towards the target. We suggest that you start practicing a downswing in slow-motion. Then, move on to 50-75% of your potential speed until you are completely confident about it.

cardoustie

Give them a little more time. You need to get used to them over say 4 or 5 rounds

Nessism

I've never built with X7 shafts but it seems strange that the clubs would come in at E0. You might want to talk to the builder to find out if tip weights were used for some reason (can't imagine why but can't hurt to ask).

dunn

Yeah not for everyone and totalweight is just as important.....i didn't like it either tho I know some who do

BirdieBob

Your only option would be to reduce the length back to what you had been playing.... -1/2". And check for tip weights and remove if possible.

dunn

It's all personal preference so no one can really tell you what you will or won't like

dunn

One of best things in golf I ever did was learn how to build clubs for myself....

platgof

Golf Pride MC4 weighs 64 grams, and Winn weighs 52 grams. I use MC4 on my wedges to lower swing weight. Did you use impact tape to see what kind on impact you now have. I am referrinmg to the sole type, not face, but both would be good to use. I like the lead tape under the grip method, never heard of it, slick!

image

What Compression Is Not?

Image
There’s a myth about compression. Many amateurs (and pros) still believe that, in a good iron shot, the ball is squeezed against the turfby the clubface. Some even believe that the ball then bounces up off the turf after this “ball sandwich”. This is not true. In every golf shot, the ball launches close to the loftpresented at impact. …
See more on adamyounggolf.com

So, What Is Compression?

  • If compression isn’t “squeezing the ball against the turf”, what is it? Vertical spin-loftis a huge component, and the area that this article will focus on. Vertical spin loft is the difference between the angle of attack and the loftwe present at impact. So, in example A, we have a -7 angle of attack (hitting 7 degrees down on the ball) and present +33 degrees of dynamic loft. We are effe…
See more on adamyounggolf.com

How Do We Do It?

  • Have you ever noticed how almost every pro has a significant squatting motion into their left side close to the top of their swing? Tiger Woods (left) and Rory Mcilroy (right). The yellow lines represent their head height and body positions at the top of the swing. See how they move down and forwards in transition. This does two things 1. The “squatting” part of the motion effectively …
See more on adamyounggolf.com

More Info

  • Vertical spin loft is just one component – but a pretty big one – relating to compressionwith irons. Strike quality, horizontal spin loft, speed etc. all make a difference too. The article above discusses a very important element to maximizing distance with irons in a way that is beneficial to strike quality and consistencytoo. If you want to learn more about this, as well as how to lear…
See more on adamyounggolf.com

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9