- Remove Old Finish. Golf clubs can be refinished in a variety of ways to give them a new lease on life. ...
- Sand And Polish With A Fine Gauge Sandpaper. To refinish your golf clubs’ black oxide, start by cleaning them with a damp cloth and soap. ...
- Apply A High-Quality Polyurethane. Polyurethane is a great way to protect your golf clubs from the elements and years of abuse. ...
- Buff With A Clean, Soft Cloth. Buffing golf clubs with a clean, soft cloth will restore their luster and protect them from oxidation.
How to refurbish golf clubs?
red, green, blue) Wheel set (if you don’t want to buy separately) Polishing compounds
- Sisal wheel – This is going to do the bulk of your polishing and should be used with the black polishing compound (you can also use brown and white compounds ...
- Polishing wheels – For final touches. Use with finer polishing compounds (i.e. red, green, blue)
- Wheel set (if you don’t want to buy separately)
- Polishing compounds
How to regrip golf clubs [7 Easy Steps]?
How To Regrip Golf Clubs Yourself. You will need the following… New grips; Double-sided tape; White Spirit; A sharp Stanley knife or similar; A cloth; A receptacle as long as a grip; A vice with shaft protector; Step 1: Remove the old grips. First, cut or peel off the old grips, which may or may not be straightforward depending on how long they’ve been on.
How to regrip your golf clubs at home?
How To Regrip Your Golf Clubs At Home? Remove the old grip and cut away from yourself as much as possible. Take off the old grip and grip tape by peeling or scratching it. Make sure you clean off the residue with a cloth and Mineral Spirits Grip Solvent. If you are using a utility knife to cut graphite shafts, use a hook blade.
What solvent to use for regripping golf clubs?
What Solvent Is Used to Install Golf Club Grips?
- Commercial Grip Solvent. The process of replacing golf grips includes placing tape on the golf shaft, and then lubricating the tape with solvent in order to deactivate the tape's adhesive.
- Mineral Spirits. You can also use mineral spirits, found in any hardware store, to install your golf grips. ...
- Nail Polish Remover. ...
- Water. ...
How do you restore the finish on a golf club?
2:2612:33How to restore the chrome finish on a set of golf club irons - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing abrasives the first operation is where we're going to remove all of those gouges and scrapeMoreUsing abrasives the first operation is where we're going to remove all of those gouges and scrape marks. And all those sort of things you saw originally. So we've got to get to the bottom of those.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
How do you refinish a golf iron face?
0:004:48DIY Golf Club Restoration - Reconditioning the Club Face TutorialYouTubeStart of suggested clipEnd of suggested clipSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little moreMoreSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little more durable than just masking tape i'll probably put that just on the edges.
How do you refinish rusty golf clubs?
0:242:14Golf Information : Removing Rust From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's very clean. But if you take a piece of steel wool. And just lightly brush it right along theMoreIt's very clean. But if you take a piece of steel wool. And just lightly brush it right along the edges it'll get rid of all of this rust as you can see it's shining up rather nicely.
Can I spray paint my golf clubs?
Yes. You can easily repaint your golf club heads at home. First, you will have to remove any existing paint from the heads. You can apply a paint remover and let it soak for a few hours before removing the old paint with a sharp object.
How do you blacken golf clubs?
1:404:56HOW TO MAKE YOUR GOLF CLUBS LOOK RAW - YouTubeYouTubeStart of suggested clipEnd of suggested clipDramatic purposes we'll use this big ol tub. Not like I really care to have a big jug of whiteMoreDramatic purposes we'll use this big ol tub. Not like I really care to have a big jug of white vinegar laying around and we're gonna let it soak for 48. Hours that's a long time.
How do you restore old irons?
10:0124:18how to refurbish an old golf club 2020 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can use two different methods you can either use the unstitched buffing wheel with the yellowMoreSo you can use two different methods you can either use the unstitched buffing wheel with the yellow rouge or you can use the sizzle wheel which is very much like hay in a circle.
Can you use metal polish on golf clubs?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.
Can you sandblast golf clubs?
Although it is an investment to set up, sandblasting is a quick, efficient way to turn an old club into a new one.
Your new favorite hobby–golf club refinishing
There is nothing more satisfying than turning an old, beat up putter into a masterpiece. In this refinishing series, I’ll show you the techniques required to unleash your creativity on all your old golf clubs!
Brass vs. Carbon Steel vs. Stainless Steel
When I first started refinishing golf clubs, I had a difficult time finding information. One of the topics that caused me a lot of unecessary struggle was not knowing the different types of metal that golf clubs are made of.
Preventing Rusty Golf Clubs
For some finishes, it is difficult, if not impossible to prevent rust on a golf club. In this post I’ll show you my preferred method for preventing rust on golf clubs.
Refinish a Scotty Cameron Headcover
If you have an old Scotty Cameron Newport Select putter headcover laying around, you can turn it into a custom beauty!
Paint Fill 101
The quickest and easiest way to customize your golf clubs is by painting the text on them. I’ll show you some of my favorite techniques for doing so, my preferred paints, and some quick tips that will make your life a lot easier when customizing your golf clubs.
Removing Nicks and Dings on a Golf Club
Ever wonder how a golf club is refurbished? Did you know that your beat up putter in the basement can be completely transformed in just a few minutes? It’s called a “deburring wheel”, and it will be your single biggest tool in golf club refinishing.
Make a Scotty Cameron look Brand New (Basic Satin Finish)
The great thing about stainless steel putters (most new Scotty Camerons) is the fact that after refinishing them, they don’t rust! Here is the most basic finish you can do on a stainless steel putter, and it looks clean and awesome.
Series Navigation
Golf club refinishing is the art of taking an old, used golf club and turning it into a brand new piece of art. Below are just a few of my own creations for you to look through and see what is possible!
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
Titleist695mb
hey, this will be my first post so sorry if it may be in the wrong topic or my questions have already been answered... i searched for it and did not finds what i was looking for. im looking for some information on how to refinish mainly irons and wedges or even putters.
Nessism
Stainless irons are the easiest to refinish. Get some sanding roll strips and a file and go to town. I just finished a set of 431 stainless Wishon 752 irons and they turned out nice. I've done Ping's too.
Titleist695mb
wow looks great!? can you be more specific with what you used and how? like where would i get the supplies you mentioned and process you used? really looks good. thanks for the response.
Nessism
FYI, you can't do that kind of refinishing on chrome plated irons, only stainless steel. What specific clubs are you wanting to restore?
Titleist695mb
ive kind of gotten into this refinishing thing lately and been doing alot of wedges and a few putters... right now i just clean up the wedge and paintfill to make it look nice and a bit newer. but im interested in new finishes. clubs i usually work on are vokeys. usually spin milled.
Nessism
Only the oil can Vokey's can be worked on like referenced here. The chrome plating on top of the carbon steel would have to be stripped off to make the club "raw" before you could sand on the head to remove dings and the like.
Titleist695mb
wow very impressive. thanks for all the information. if any of you can help me out with products and tools i should get to start and also the process steps that would be awesome thank you so much guys
How to clean rust off golf clubs?
A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
What to put on golf clubs to prevent rusting?
Wax. This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.
Can a Cobra wedge rust?
Cobra Trusty Rusty Wedge. Leaving you’re club outside or even storing it in unfavorable conditions can result in rust. Contrary to popular belief, a little rust is not the end of the world. For some used clubs, especially wedges, some rust may even be beneficial. Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase ...
Can steel wool be used on golf clubs?
Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.
Does rust on a golf wedge increase spin?
Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
Sole and Toe Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We grind the sole and remove any damage and scratches. We then buff the area to bring back the shine. Please note that all orders that include refurbishment must be placed by phone.
Club face Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We polish the face and remove many of the cosmetic damage and scratches. We then buff the area to bring back the shine.
ADDITIONAL SERVICES
In addition to our refurbishment programs, we offer many additional customization services for your clubs. When your getting your clubs serviced, you might want to add on these services to increase the life of your new club.
