Instructions
- Clean the club. You can do this with a bucket of hot, soapy water and a soft cloth. To get the sole plate clean, use a...
- Remove the sole plate and submerge it in a small container of varnish remover. The sole plate is the metal plate located...
- Use masking tape to cover over the string windings or plastic insert where the shaft and the head come together.
Full Answer
How to refinish a wood golf club?
How to Refinish a Wood Golf Club. 1 Step 2. Apply a layer of paint remover to the club head and allow it to remain for 10 minutes before buffing with the steel wool. Repeat until any ... 2 Step 3. 3 Step 4. 4 Step 5. 5 Step 6. More items
How do you paint the head of a golf club?
Apply a layer of paint remover to the club head and allow it to remain for 10 minutes before buffing with the steel wool. Repeat until any paint on the club head is gone. Apply a layer of enamel paint or wood stain to the head of the club and allow to dry. Repeat until the head has attained the desired color.
Can my wooden golf clubs be repaired or replaced?
Traditional wooden golf clubs have a certain beauty that has been lost in the transition to metal woods. Unfortunately, with time, the finish of a wood can be lost or dulled due to repeated use or exposure to the elements. Fortunately, repairing this damage is a do-it-yourself task you'll be glad you undertook at the end of the day.
Can metal wood be refinished?
Continental golf is the industry leader in metal wood refinishing. Our refinishing process will restore the painted sections of the club from original to any color you can pretty much imagine. The only part we can't restore back to original is the anodized black face and soles of the club.
How do you refinish golf woods?
Wipe the head of the club gently with fine steel wool to remove the excess old paint. Apply the desired stain to the wood of the club head with your 1-inch paint brush. Allow the club to dry for one to two days so that the stain has time to set. Wipe down the club and apply the varnish or lacquer of your choice.
How do you restore the face of a golf club?
0:184:48How to Recondition the Club Face - DIY Golf Club Restoration - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little moreMoreSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little more durable than just masking tape i'll probably put that just on the edges.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
What kind of paint do you use on golf clubs?
Enamel paint and preferably epoxy-based enamel paint is highly recommended. Enamel is oil-based, adheres easily to metal surfaces, is highly durable, and, has a gloss finish. Acrylic Paint. This paint is water-based and drys quite quickly and is cheaper than enamel paint.
Can you spray paint a golf club?
You Can Now Use the Paint for Repainting Your Golf Club Shafts. Once the primer has dried, you can easily use an acrylic oil-based paint or any epoxy-based paint to repaint your golf club steel shaft. You can pick any color paint of your choice and apply thin coats of this paint on top of your shaft.
Can golf clubs be refinished?
Refinishing a set of golf clubs is very simple, it takes only a few days, and it is well worth the effort. After it's completed one time or two it will become even easier to accomplish the next time and the time after that.
Can you use metal polish on golf clubs?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.
How do you refinish a golf club head?
2:4210:16DIY - How To Repair Golf Driver Club Head Paint! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou don't want any moisture. Available when you are trying to paint or prep this after it isMoreYou don't want any moisture. Available when you are trying to paint or prep this after it is sufficiently dry just rub it down with a little bit of rubbing alcohol just to get any sort of impurities.
Can you polish scratches out of golf clubs?
0:432:46Removing Scratches From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo as far as your your metal woods go try some rubbing compound if you happen to get a knick or twoMoreSo as far as your your metal woods go try some rubbing compound if you happen to get a knick or two in your in your in your wood head it works great.
How do I refinish my irons?
10:1911:49Refurbishing your Irons with Andrew Ainsworth - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the golf clubs. It's relatively straightforward process again just just be careful you know payMoreOn the golf clubs. It's relatively straightforward process again just just be careful you know pay attention to the health. And safety you know wear the goggles. You know watch out for loose clothing.
Can you use WD40 to clean golf clubs?
Remove the golf clubs from the bag; if you spray WD40 on your bag, it will smell for a long time. Spray the WD40 on your irons and wedges and let it sit for a few minutes. Take a dry cloth and wipe the WD40 off the clubs. Once it is off, you can wash and rinse the clubs.
Instructions
Clean the club. You can do this with a bucket of hot, soapy water and a soft cloth. To get the sole plate clean, use a small screwdriver to run through the grooves and remove dirt.
Tips & Warnings
Always use a fine piece of steel wool on the club head to prevent marring the surface of the club. Never rub too hard with the steel wool. Always allow the paint, varnish and stain to dry before applying a secondary coat. See manufacturer specifications for required drying times.
Your new favorite hobby–golf club refinishing
There is nothing more satisfying than turning an old, beat up putter into a masterpiece. In this refinishing series, I’ll show you the techniques required to unleash your creativity on all your old golf clubs!
Brass vs. Carbon Steel vs. Stainless Steel
When I first started refinishing golf clubs, I had a difficult time finding information. One of the topics that caused me a lot of unecessary struggle was not knowing the different types of metal that golf clubs are made of.
Preventing Rusty Golf Clubs
For some finishes, it is difficult, if not impossible to prevent rust on a golf club. In this post I’ll show you my preferred method for preventing rust on golf clubs.
Refinish a Scotty Cameron Headcover
If you have an old Scotty Cameron Newport Select putter headcover laying around, you can turn it into a custom beauty!
Paint Fill 101
The quickest and easiest way to customize your golf clubs is by painting the text on them. I’ll show you some of my favorite techniques for doing so, my preferred paints, and some quick tips that will make your life a lot easier when customizing your golf clubs.
Removing Nicks and Dings on a Golf Club
Ever wonder how a golf club is refurbished? Did you know that your beat up putter in the basement can be completely transformed in just a few minutes? It’s called a “deburring wheel”, and it will be your single biggest tool in golf club refinishing.
Make a Scotty Cameron look Brand New (Basic Satin Finish)
The great thing about stainless steel putters (most new Scotty Camerons) is the fact that after refinishing them, they don’t rust! Here is the most basic finish you can do on a stainless steel putter, and it looks clean and awesome.
What is golf club refinishing?
Refinishing clubs can help give them new life. When it comes to a golfer and a set of clubs usually that golfer is very attached to them, sort of like a newborn baby is close to a blanket or similar to a teenage couple being emotionally involved with each other on a different level.
What tools are needed to refinish golf clubs?
A small Philips-head screwdriver, a shallow pin, a small natural-bristle brush and an artist’s brush are all the tools needed to complete the process.
How long does it take to refinish a golf club?
Refinishing a set of golf clubs is very simple, it takes only a few days, and it is well worth the effort. After it’s completed one time or two it will become even easier to accomplish the next time and the time after that. All golfers know the two most important factors when on the golf course are to place a great score on the score card and to look stylish while giving your friends and/or opponents a nice, friendly smackdown on the course after 18 or more.
What to do with holes in wood for golf clubs?
If there are holes or dings in the wood, fill them with epoxy filler only . If wood or steel fillers are used, it can change the dynamics of the club's weight and swing capabilities. After that, the refinishing process is complete, and the clubs will almost appear as if they were just purchased.
How long does it take for steel wool to dry?
Then, with the steel wool, buff the wood lightly until the shine begins to brighten, Then, allow the woods to dry for anywhere from a day or 2.
What are the two most important factors when on the golf course?
All golfers know the two most important factors when on the golf course are to place a great score on the score card and to look stylish while giving your friends and/or opponents a nice, friendly smackdown on the course after 18 or more . Sorry, the video player failed to load.
Is a golfer attached to a set of clubs?
Overview. When it comes to a golfer and a set of clubs usually that golfer is very attached to them, sort of like a newborn baby is close to a blanket or similar to a teenage couple being emotionally involved with each other on a different level. A golfer never wants to part with a quality older set of clubs, especially if they normally work well ...
Feedback
Nice work! Here is a writeup on another club, I posted pics here of my paintless refinish. Did you find it hard to make the clear coat look good?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
APPLY NOW: L.A.B. Golf MEZZ.1 Putter (Early Access) Member Testing! 10 Testers Needed!
L.A.B. Golf is choosing ten GolfWRX members to receive their MEZZ.1 putter early and put their brand new product to the test before reporting back to the community...
longbal30
i can do it for $50 a head, must be pulled. refinish would be for paint only. no refinishing of raw metal areas.
The General
Does anybody know where I can get non-painted fairway woods refinished? I have a Titleist F3.05 which I would like to have touched up? Cheers, Mike.
