- First, remove club head from shaft. If head is not removed the intense heat will cause the ferrule to melt and the epoxy to breakdown and a reshaft ...
- Next, you will need to soak the club head using the 1 Liter Coke bottle for about an hour. This will strip any existing finish on the head. ...
- Now remove your club from the Coke. ...
Full Answer
What are the best tips for refinishing golf clubs?
When refinishing golf clubs, it is best to collect everything you will need--from new shafts or grips to double-sided tape and solvent--before you start. Refinishing or club-making kits are available at most major retailers.
How do you clean a rusty Golf Club?
This can be a good place to start for most clubs. With a simple mixture of soap and water, you do not need to worry about damaging the club. After a brief soak, use a small brush like a toothbrush to try and remove any rust. This works best if the rust buildup is not extreme.
How do you finish clubheads with epoxy?
When the shaft is removed, clean out the hosel, then apply epoxy to the new shaft and the interior of the hosel. Insert the shaft into the hosel and let dry overnight. Putting a new finish on your clubheads is quite easy and will make your clubs look like new.
How do you fix a dirty clubhead?
Insert the shaft into the hosel and let dry overnight. Putting a new finish on your clubheads is quite easy and will make your clubs look like new. The first step is removing the current finish and any paint on the clubhead. This may be accomplished by soaking the clubhead in Coke for two to three hours, then wiping the finish off.
How do you refinish black golf clubs?
0:118:42How to do a Black Oxide Finish on Golf Putter - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this finish you'll just need a few materials actually buying a birchwood casey gun bluing kitMoreFor this finish you'll just need a few materials actually buying a birchwood casey gun bluing kit these these three bottles. Actually came in a kit.
Can golf clubs be refinished?
Once your club is clean, you may want to give it a fresh new finish. Professional club finishing can be expensive. You can expect to pay around $50 per club to get them professionally refinished. This can be a fun way to bring life back into a beloved or special set.
How do you refinish a black putter?
0:1510:51How to do a Black Oxide Finish on a Scotty Cameron Golf Putter - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's used for stainless steel putters. First what we're gonna have to do is submerse the putter in aMoreIt's used for stainless steel putters. First what we're gonna have to do is submerse the putter in a 50/50 muriatic acid solution.
How do you refinish a stainless steel putter?
0:037:57Removing Dings and scratches from Golf Putter at Home DIY putter refinishYouTubeStart of suggested clipEnd of suggested clipAnd then I'm gonna end up with the nickel finish on it. All right so I taped this thing up didn'tMoreAnd then I'm gonna end up with the nickel finish on it. All right so I taped this thing up didn't really spend too much time on it. But I basically have the spots where I want to kind of scrape.
Can you refinish black golf irons?
To refinish your golf clubs' black oxide, start by cleaning them with a damp cloth and soap. Next, use a fine gauge sandpaper to remove any scratches or blemishes on the club surface. Finally, apply a protective finish to the newly polished golf club.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
What kind of paint do you use on a golf putter?
I use acrylic paint because I have found that it is more durable, comes in more colors, dries faster, water will clean the brushes, and it is non-toxic. I have also found that enamel paint can be ruined by some oils used on putters to prevent rust and protect finishes.
How do you refinish a putter yourself?
3:589:30How To Restore And Customize Your Putter (Part 1) - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's called citrus strip. It. Works really really well you just take it and put the little dab onMoreIt's called citrus strip. It. Works really really well you just take it and put the little dab on the spot that you want to remove the paint from let it sit there for about 30 to 35 minutes.
Can you Cerakote golf clubs?
0:3311:14Ceramic Coating a Golf Club Using Cerakote - DIY Golf Club RestorationYouTubeStart of suggested clipEnd of suggested clipSo cerakote is a product it's actually ceramic coating that you apply to things like firearms. AndMoreSo cerakote is a product it's actually ceramic coating that you apply to things like firearms. And we're gonna try it on a golf club. And you bake it in an oven.
How do you refinish metal golf clubs?
Steps to Paint your Golf Iron:Use acrylic spray paint with the color of your choice to paint the iron.Use a damp paper towel to remove the excess paint.Let the paint dry up.Use two to three coats with enough intervals between each coat for the previous layer to dry.
Can you polish scratches out of golf irons?
0:432:46Removing Scratches From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd simply take that rubbing compound. Just like you would do if you had a little nick in your. Car.MoreAnd simply take that rubbing compound. Just like you would do if you had a little nick in your. Car. Get that rubbing compound. Out. And go ahead and apply it to that wood. Head metal wood head.
How much does it cost to refurbish a putter?
The process Armed with seven putters in approximately the same condition and the internet, I found seven different companies who offer a refinishing service. Each company cost between $125 and $129.
How to twist a clubhead off?
Once the epoxy begins to break down, you can twist most clubheads off by hand. When the shaft is removed, clean out the hosel, then apply epoxy to the new shaft and the interior of the hosel. Insert the shaft into the hosel and let dry overnight.
What is refinishing golf clubs?
Refinishing golf clubs is a fairly simple process that will give you an opportunity to try new things with old clubs. Whether you want a new look on your putter head or a different flex on your shaft, refinishing clubs at home is a great way to try out new technology.
How long does it take for a golf club to dry?
If you will be refinishing multiple clubs, the process might take several days--clubs need to dry for about 12 hours at different stages of the process.
Your new favorite hobby–golf club refinishing
There is nothing more satisfying than turning an old, beat up putter into a masterpiece. In this refinishing series, I’ll show you the techniques required to unleash your creativity on all your old golf clubs!
Brass vs. Carbon Steel vs. Stainless Steel
When I first started refinishing golf clubs, I had a difficult time finding information. One of the topics that caused me a lot of unecessary struggle was not knowing the different types of metal that golf clubs are made of.
Preventing Rusty Golf Clubs
For some finishes, it is difficult, if not impossible to prevent rust on a golf club. In this post I’ll show you my preferred method for preventing rust on golf clubs.
Refinish a Scotty Cameron Headcover
If you have an old Scotty Cameron Newport Select putter headcover laying around, you can turn it into a custom beauty!
Paint Fill 101
The quickest and easiest way to customize your golf clubs is by painting the text on them. I’ll show you some of my favorite techniques for doing so, my preferred paints, and some quick tips that will make your life a lot easier when customizing your golf clubs.
Removing Nicks and Dings on a Golf Club
Ever wonder how a golf club is refurbished? Did you know that your beat up putter in the basement can be completely transformed in just a few minutes? It’s called a “deburring wheel”, and it will be your single biggest tool in golf club refinishing.
Make a Scotty Cameron look Brand New (Basic Satin Finish)
The great thing about stainless steel putters (most new Scotty Camerons) is the fact that after refinishing them, they don’t rust! Here is the most basic finish you can do on a stainless steel putter, and it looks clean and awesome.
Series Navigation
Golf club refinishing is the art of taking an old, used golf club and turning it into a brand new piece of art. Below are just a few of my own creations for you to look through and see what is possible!
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
What is pitting corrosion?
Pitting Corrosion. Often, surface rust can lead to further corrosion. The most damaging is called pitting corrosion. This is localized corrosion that results in holes or divets in the metal surface. While it is possible to remove the rust from the surface of these divets, it is very difficult to repair them.
How to clean rust off golf clubs?
A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
What to put on golf clubs to prevent rusting?
Wax. This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.
Can you use industrial rust remover on plastic?
If none of the other solutions, you can go to a hardware or auto parts store and purchase industrial rust remover. This is a harsh chemical that can damage club finishes, plastics, and other materials. Be sure to only get the rust remover on the surface you want to clean. Also, follow the instructions specified by the specific product you use.
Does rust on a golf wedge increase spin?
Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
Does Coca Cola rust?
Coca-Cola has the ability to dissolve rust, but can also damage the club if left exposed for long periods of time. It is best to soak the club in Coca-Cola for only a few minutes at a time. Again, use a small brush to scrape clean the rust.
Can a Cobra wedge rust?
Cobra Trusty Rusty Wedge. Leaving you’re club outside or even storing it in unfavorable conditions can result in rust. Contrary to popular belief, a little rust is not the end of the world. For some used clubs, especially wedges, some rust may even be beneficial. Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase ...
