Soak the heads for 15 to 20 minutes in a cup of white vinegar with a tablespoon of salt added. Rinse and dry. Buff the heads on a high-speed buffer with a soft compound, such as Tripoli Polishing Compound, if you want the heads restored to their original luster.
Full Answer
What's the best way to clean a copper head golf club?
Use a copper polish such as Noxon or Nevr-Dull. Ping specifically shuns the recommendation of chemicals on their copper irons, but as long as you wash with soapy water and dry the clubs after application, the chemicals shouldn't harm the club head.
How to refinish a wood golf club?
How to Refinish a Wood Golf Club. 1 Step 2. Apply a layer of paint remover to the club head and allow it to remain for 10 minutes before buffing with the steel wool. Repeat until any ... 2 Step 3. 3 Step 4. 4 Step 5. 5 Step 6. More items
How do you paint the head of a golf club?
Apply a layer of paint remover to the club head and allow it to remain for 10 minutes before buffing with the steel wool. Repeat until any paint on the club head is gone. Apply a layer of enamel paint or wood stain to the head of the club and allow to dry. Repeat until the head has attained the desired color.
Should you clean your beryllium copper head clubs?
If you’re swinging a classic set of beryllium copper head clubs, you probably like the look as well as the feel. Lovers of the club insist that its softer hit brings them to the green with consistent spin and loft. Cleaning the clubs keeps them hitting well and looking fine against the green.
How do you restore copper golf clubs?
1:509:27And basically rub it onto the club barely applying any pressure at all right. Now. So after you getMoreAnd basically rub it onto the club barely applying any pressure at all right. Now. So after you get it on there nicely. Push pretty hard on it. And as you push hard on.
How do you clean copper head golf clubs?
Dip a club brush or toothpaste in the bucket of soapy water. Scrub the grooves of your club to remove dirt and debris. If the dirt won't come loose, soak the club head in the soapy water for 10 minutes and then try scrubbing it again.
How do you refurbish golf club heads?
4:1024:18And you do the acetone you can also remove the numbers. Themselves. So you have to be very veryMoreAnd you do the acetone you can also remove the numbers. Themselves. So you have to be very very careful with that then you've got to polish the shaft and then you got to redo the grip.
How do you resurface a golf club face?
0:184:48So i'll throw some masking tape on i also have a little bit of aluminum tape which is a little moreMoreSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little more durable than just masking tape i'll probably put that just on the edges.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
Are Copper golf clubs better?
Beryllium copper is said to be the greatest material ever used for golf irons. The copper supposedly provides an unrivaled feel and performance compared to its counterparts. In this article, we will take a look at beryllium copper irons and uncover the truth behind the myths.
How do you get rust off golf club heads?
0:212:14It's very clean. But if you take a piece of steel wool. And just lightly brush it right along theMoreIt's very clean. But if you take a piece of steel wool. And just lightly brush it right along the edges it'll get rid of all of this rust as you can see it's shining up rather nicely.
Can you use metal polish on golf clubs?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.
What kind of paint do you use on golf clubs?
Enamel paint and preferably epoxy-based enamel paint is highly recommended. Enamel is oil-based, adheres easily to metal surfaces, is highly durable, and, has a gloss finish. Acrylic Paint. This paint is water-based and drys quite quickly and is cheaper than enamel paint.
Can you reface golf clubs?
Once your club is clean, you may want to give it a fresh new finish. Professional club finishing can be expensive. You can expect to pay around $50 per club to get them professionally refinished. This can be a fun way to bring life back into a beloved or special set.
How do I restore my drivers head?
3:4512:12And go from there and what we're gonna do is just real gently just start to rub. It in littleMoreAnd go from there and what we're gonna do is just real gently just start to rub. It in little circles just gentle pressure not too hard. And just kind of work it around for a little bit.
How much does it cost to refurbish a golf club?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440.
What is refinishing irons?
Refinishing Irons. The refurbishing process changes depending on your irons. If you play chrome-forged, carbon steel irons, you may want to rechrome them to bring back the luster of their original state. Most refurbishment jobs target performance, by repairing nicks, scratches and dents. Rechroming.
How to paint a driver's sole?
Focus your efforts to the sole and the crown. Begin painting. Begin with the crown, find a color match for the crown, then slowly apply smooth strokes with your paintbrush.
Is refurbishing a club difficult?
Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs. Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs.
Your new favorite hobby–golf club refinishing
There is nothing more satisfying than turning an old, beat up putter into a masterpiece. In this refinishing series, I’ll show you the techniques required to unleash your creativity on all your old golf clubs!
Brass vs. Carbon Steel vs. Stainless Steel
When I first started refinishing golf clubs, I had a difficult time finding information. One of the topics that caused me a lot of unecessary struggle was not knowing the different types of metal that golf clubs are made of.
Preventing Rusty Golf Clubs
For some finishes, it is difficult, if not impossible to prevent rust on a golf club. In this post I’ll show you my preferred method for preventing rust on golf clubs.
Refinish a Scotty Cameron Headcover
If you have an old Scotty Cameron Newport Select putter headcover laying around, you can turn it into a custom beauty!
Paint Fill 101
The quickest and easiest way to customize your golf clubs is by painting the text on them. I’ll show you some of my favorite techniques for doing so, my preferred paints, and some quick tips that will make your life a lot easier when customizing your golf clubs.
Removing Nicks and Dings on a Golf Club
Ever wonder how a golf club is refurbished? Did you know that your beat up putter in the basement can be completely transformed in just a few minutes? It’s called a “deburring wheel”, and it will be your single biggest tool in golf club refinishing.
Make a Scotty Cameron look Brand New (Basic Satin Finish)
The great thing about stainless steel putters (most new Scotty Camerons) is the fact that after refinishing them, they don’t rust! Here is the most basic finish you can do on a stainless steel putter, and it looks clean and awesome.
How to clean rust off golf clubs?
A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
What to put on golf clubs to prevent rusting?
Wax. This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.
Can a Cobra wedge rust?
Cobra Trusty Rusty Wedge. Leaving you’re club outside or even storing it in unfavorable conditions can result in rust. Contrary to popular belief, a little rust is not the end of the world. For some used clubs, especially wedges, some rust may even be beneficial. Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase ...
Can steel wool be used on golf clubs?
Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.
Does rust on a golf wedge increase spin?
Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
How to clean a golf club with soap residue?
Dip a rag in the soapy water and clean the rest of the club head, the shaft and the grip. Take a rag and dip it in warm water to ensure you get all of the soap residue off the club.
How to clean a golf club head?
Dip a club brush or toothpaste in the bucket of soapy water. Scrub the grooves of your club to remove dirt and debris. If the dirt won't come loose, soak the club head in the soapy water for 10 minutes and then try scrubbing it again.
Since 1974, The Iron Factory has been committed to superior craftsmanship and quality service
Founded by Jim Kronus, The Iron Factory began as the first and only golf club iron refinisher in the United States. Since then, we have perfected the process of repairing, rebuilding, and refinishing over a million clubs for both professional and amateur golfers.
Time
When we receive the clubs it normally takes 3-5 weeks depending on the season for all rechromes and rebuilds. Strip (only) and regrooving please allow 2 weeks. Any extra work will increase the time. Time is easily forgotten; quality is long remembered.
Shipping
Send your clubs to our listed address with a brief note of work required and include a daytime phone number.
Chroming Process
During the polishing operation weight can be lost removing nicks and dings. The amount of material added during the plating process can replace lost head weight.
Costs
All prices are per club and currently listed on our website, any special accommodations please inquire.
Step 2
Apply a layer of paint remover to the club head and allow it to remain for 10 minutes before buffing with the steel wool. Repeat until any paint on the club head is gone.
Step 3
Apply a layer of enamel paint or wood stain to the head of the club and allow to dry. Repeat until the head has attained the desired color.
Step 7
Lee Elder broke down racial barriers throughout his career and paved the way for others.
