Golf-FAQ.com

how to refinish golf clubs

by Mr. Melany Waters DVM Published 3 years ago Updated 2 years ago
image

Tips to Refinish Golf Clubs Yourself

  • Overview. Refinishing golf clubs is a fairly simple process that will give you an opportunity to try new things with old...
  • Grips. Replacing grips is the easiest project, and since you should replace them every six to 12 months, it's a good one...
  • Shafts. Replacing shafts is a bit more involved and often requires the use of a heat gun...

Part of a video titled how to refurbish an old golf club 2020 - YouTube
2:25
24:18
Just some water and some scraping and away we go yep okay had to stop because we had a customer howMoreJust some water and some scraping and away we go yep okay had to stop because we had a customer how about that. Okay just a few minutes with the with the groove it brush.

Full Answer

How to refurbish golf clubs?

Tips to Refinish Golf Clubs Yourself Overview. Refinishing golf clubs is a fairly simple process that will give you an opportunity to try new things with old... Grips. Replacing grips is the easiest project, and since you should replace them every six to 12 months, it's a good one... Shafts. ...

How to regrip golf clubs [7 Easy Steps]?

Paint Fill 101. The quickest and easiest way to customize your golf clubs is by painting the text on them. I’ll show you some of my favorite techniques for doing so, my preferred paints, and some quick tips that will make your life a lot easier when customizing your golf clubs. Go to Post. 6.

How to regrip your golf clubs at home?

Apply the desired stain to the wood of the club head with your 1-inch paint brush. Allow the club to dry for one to two days so that the stain has time to set. Wipe down the club and apply the varnish or lacquer of your choice. Buff the club head with the fine steel wool and then reapply the spray varnish or lacquer for a smooth exterior look.

What solvent to use for regripping golf clubs?

Apr 21, 2020 · It is best to soak the club in Coca-Cola for only a few minutes at a time. Again, use a small brush to scrape clean the rust. Vinegar and Lemon Juice Similar to Coca-Cola, the acidity of Vinegar and Lemon Juice works to break down and remove rust. A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.

image

Can you refinish your own golf clubs?

Whether you want a new look on your putter head or a different flex on your shaft, refinishing clubs at home is a great way to try out new technology. Refinishing clubs is a do-it-yourself project and should be approached with ample time and proper materials.

How do you restore the finish on a golf club?

2:2612:33How to restore the chrome finish on a set of golf club irons - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing abrasives the first operation is where we're going to remove all of those gouges and scrapeMoreUsing abrasives the first operation is where we're going to remove all of those gouges and scrape marks. And all those sort of things you saw originally.

How do I make my golf clubs look new?

Take a wet towel with a little dab of dish soap on it, and clean your golf club grip. Rinse with a clean wet cloth. Dry your club and club grip with a new clean dry cloth. Optionally, you can use some chrome polish or metal polish to polish the golf club shaft and face to help protect against rust.Oct 27, 2017

Can you resurface golf irons?

Once your club is clean, you may want to give it a fresh new finish. Professional club finishing can be expensive. You can expect to pay around $50 per club to get them professionally refinished. This can be a fun way to bring life back into a beloved or special set.Apr 21, 2020

Should you polish golf clubs?

Polishing your golf clubs should be a standard part of your golf club maintenance routine. Polishing golf clubs not only improves the cosmetic appearance of golf clubs, but it also protects the clubs against environmental factors such as dirt and water.

How do you make old golf clubs shiny?

Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.Apr 15, 2022

How do you keep your irons looking new?

8 Simple Ways to Care for Your Golf ClubsStore your golf clubs properly. ... Never put your golf clubs away when wet. ... Use a golf towel. ... Use head covers on your woods. ... Clean the club heads between plays. ... Don't forget to clean the grips. ... Regularly inspect the grips for wear and tear.More items...•Sep 28, 2020

Your new favorite hobby–golf club refinishing

There is nothing more satisfying than turning an old, beat up putter into a masterpiece. In this refinishing series, I’ll show you the techniques required to unleash your creativity on all your old golf clubs!

Brass vs. Carbon Steel vs. Stainless Steel

When I first started refinishing golf clubs, I had a difficult time finding information. One of the topics that caused me a lot of unecessary struggle was not knowing the different types of metal that golf clubs are made of.

Preventing Rusty Golf Clubs

For some finishes, it is difficult, if not impossible to prevent rust on a golf club. In this post I’ll show you my preferred method for preventing rust on golf clubs.

Refinish a Scotty Cameron Headcover

If you have an old Scotty Cameron Newport Select putter headcover laying around, you can turn it into a custom beauty!

Paint Fill 101

The quickest and easiest way to customize your golf clubs is by painting the text on them. I’ll show you some of my favorite techniques for doing so, my preferred paints, and some quick tips that will make your life a lot easier when customizing your golf clubs.

Removing Nicks and Dings on a Golf Club

Ever wonder how a golf club is refurbished? Did you know that your beat up putter in the basement can be completely transformed in just a few minutes? It’s called a “deburring wheel”, and it will be your single biggest tool in golf club refinishing.

Make a Scotty Cameron look Brand New (Basic Satin Finish)

The great thing about stainless steel putters (most new Scotty Camerons) is the fact that after refinishing them, they don’t rust! Here is the most basic finish you can do on a stainless steel putter, and it looks clean and awesome.

How do I clean a golf club sole plate?

You can do this with a bucket of hot, soapy water and a soft cloth. To get the sole plate clean, use a small screwdriver to run through the grooves and remove dirt.

Can you use steel wool on a golf club?

Always use a fine piece of steel wool on the club head to prevent marring the surface of the club. Never rub too hard with the steel wool. Always allow the paint, varnish and stain to dry before applying a secondary coat. See manufacturer specifications for required drying times.

How to clean rust off golf clubs?

A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.

What to put on golf clubs to prevent rusting?

Wax. This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.

Does rust on a golf wedge increase spin?

Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.

Can a Cobra wedge rust?

Cobra Trusty Rusty Wedge. Leaving you’re club outside or even storing it in unfavorable conditions can result in rust. Contrary to popular belief, a little rust is not the end of the world. For some used clubs, especially wedges, some rust may even be beneficial. Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase ...

Can steel wool be used on golf clubs?

Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.

Can you use industrial rust remover on plastic?

If none of the other solutions, you can go to a hardware or auto parts store and purchase industrial rust remover. This is a harsh chemical that can damage club finishes, plastics, and other materials. Be sure to only get the rust remover on the surface you want to clean. Also, follow the instructions specified by the specific product you use.

What is refinishing irons?

Refinishing Irons. The refurbishing process changes depending on your irons. If you play chrome-forged, carbon steel irons, you may want to rechrome them to bring back the luster of their original state. Most refurbishment jobs target performance, by repairing nicks, scratches and dents. Rechroming.

How to paint a driver's sole?

Focus your efforts to the sole and the crown. Begin painting. Begin with the crown, find a color match for the crown, then slowly apply smooth strokes with your paintbrush.

Can you use steel wool on a driver?

Warning: Never use steel wool on your driver and fairway wood club heads. It will scratch the crown and face, and be sure to dry the head completely to avoid oxidation. Steel wool bristle club cleaners are great at getting dirt and sand out of iron grooves, but never clean your driver with them. Let the club dry.

Is refurbishing a club difficult?

Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs. Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs.

Titleist695mb

hey, this will be my first post so sorry if it may be in the wrong topic or my questions have already been answered... i searched for it and did not finds what i was looking for. im looking for some information on how to refinish mainly irons and wedges or even putters.

Nessism

Stainless irons are the easiest to refinish. Get some sanding roll strips and a file and go to town. I just finished a set of 431 stainless Wishon 752 irons and they turned out nice. I've done Ping's too.

Titleist695mb

wow looks great!? can you be more specific with what you used and how? like where would i get the supplies you mentioned and process you used? really looks good. thanks for the response.

Nessism

FYI, you can't do that kind of refinishing on chrome plated irons, only stainless steel. What specific clubs are you wanting to restore?

Titleist695mb

ive kind of gotten into this refinishing thing lately and been doing alot of wedges and a few putters... right now i just clean up the wedge and paintfill to make it look nice and a bit newer. but im interested in new finishes. clubs i usually work on are vokeys. usually spin milled.

Nessism

Only the oil can Vokey's can be worked on like referenced here. The chrome plating on top of the carbon steel would have to be stripped off to make the club "raw" before you could sand on the head to remove dings and the like.

Titleist695mb

wow very impressive. thanks for all the information. if any of you can help me out with products and tools i should get to start and also the process steps that would be awesome thank you so much guys

Sole and Toe Refurbishment

Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We grind the sole and remove any damage and scratches. We then buff the area to bring back the shine. Please note that all orders that include refurbishment must be placed by phone.

Club face Refurbishment

Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We polish the face and remove many of the cosmetic damage and scratches. We then buff the area to bring back the shine.

ADDITIONAL SERVICES

In addition to our refurbishment programs, we offer many additional customization services for your clubs. When your getting your clubs serviced, you might want to add on these services to increase the life of your new club.

What polishing compound should I use for a sisal wheel?

For polishing. Sisal wheel – This is going to do the bulk of your polishing and should be used with the black polishing compound (you can also use brown and white compounds if you are patient enough) Polishing wheels – For final touches. Use with finer polishing compounds (i.e. red, green, blue)

What is a bench buffer?

A bench buffer is for polishing wheels and is not as protective. Most bench buffers will be able to handle a deburring wheel, but they are not made for it. The ideal setup would be using the bench grinder for the deburring wheel, and the bench buffer for the polishing wheels, but is obviously a more costly setup.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9