- Clean your club with a damp microfiber cloth. ...
- Pour a small amount of rubbing compound on to a clean cloth.
- Start rubbing the cloth on to the sky mark. ...
- The sky mark will disappear.
- Ensure there’s no streaks left by the rubbing solution.
- Apply a small amount of car wax onto a clean cloth.
- Rub the club with the cloth using a circular motion. ...
How do I refinish my golf irons?
Using a soft cloth and a light soap, gently wipe the club face and head. Use the wire brush to clean the grooves on your irons and wedges. If you determine more than a cleanup is needed, it's time to refinish. Identify the problem areas on your irons. Often scuff marks on the sole need the most attention. Focus your efforts on the sole and grooves.
How do you get scratches out of a golf club?
Polishing the Club Squeeze a pea-sized drop of metal polish onto a polishing cloth. Polishing your clubs can help to prevent them from rusting and can help to remove small scratches from the irons. Smooth the polish over the metal sections of your club. Use the cloth to smear a thin, even coat of polish over the club.
What causes deep scratches on golf irons?
Chipping and fairway shots are the most often culprits. This is because these shots can be taken absolutely anywhere on the course. Dirt and small rocks will certainly cause these scratches to form on your head surface The more concerning type of damage seen on an iron or driver is the deep scratch.
What does it mean to refurbish an Irons?
Refinishing Irons The refurbishing process changes depending on your irons. If you play chrome-forged, carbon steel irons, you may want to rechrome them to bring back the luster of their original state. Most refurbishment jobs target performance, by repairing nicks, scratches and dents.
How to get scratches out of golf clubs?
What causes scratches on golf balls?
What does it feel like to have a new golf club unwrapped?
Why are there sky marks on my golf clubs?
How to clean a golf club with a light compound?
How long does it take for paint to dry on a golf club?
Can golf clubs hit rocks?
See more
How do you remove scratches from an iron?
0:001:03How to Remove Scratches From a Cast Iron Skillet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put it in the oven. And 350 for an hour step 2 take it out of the oven. And put it someplaceMoreAnd put it in the oven. And 350 for an hour step 2 take it out of the oven. And put it someplace safe where it can cool till it's cool to the touch.
How do you get deep scratches out of golf clubs?
Use a 220 Grit Sandpaper that you have soaked in water for 15 minutes. You must not use any old sandpaper you have around your house as you will end up creating more scratches. Buff out the scratches. Once you have worked on the scratches, take some 400 grit sandpaper and soak that in water.
Can you refurbish golf irons?
Once your club is clean, you may want to give it a fresh new finish. Professional club finishing can be expensive. You can expect to pay around $50 per club to get them professionally refinished. This can be a fun way to bring life back into a beloved or special set.
How do you make irons look new?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.
Can you buff scratches out of golf irons?
1:322:46Removing Scratches From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipLooking nice and new you can get a scotch brite pad or even a little steel wool works great but youMoreLooking nice and new you can get a scotch brite pad or even a little steel wool works great but you can take that scotch brite pad or that steel wool.
How do you refurbish golf clubs at home?
4:1024:18how to refurbish an old golf club 2020 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you do the acetone you can also remove the numbers. Themselves. So you have to be very veryMoreAnd you do the acetone you can also remove the numbers. Themselves. So you have to be very very careful with that then you've got to polish the shaft and then you got to redo the grip.
Is it worth refurbishing golf clubs?
When it comes to golf club refurbishment, it's often more about improving the look of your clubs rather than their playability. If a standard cleaning won't do, a golf club refinishing can help return your clubs closer to their original, polished state.
How do you restore grooves on a golf club?
1:515:13how to use your 6-head Groove Sharpener - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you can use whatever you have to hand if you've got a bike shirt or something a bit of bike oilMoreBut you can use whatever you have to hand if you've got a bike shirt or something a bit of bike oil will do the job.
How do you restore the finish on a golf club?
2:2612:33How to restore the chrome finish on a set of golf club irons - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing abrasives the first operation is where we're going to remove all of those gouges and scrapeMoreUsing abrasives the first operation is where we're going to remove all of those gouges and scrape marks. And all those sort of things you saw originally. So we've got to get to the bottom of those.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
Can I spray paint my golf clubs?
Yes. You can easily repaint your golf club heads at home. First, you will have to remove any existing paint from the heads. You can apply a paint remover and let it soak for a few hours before removing the old paint with a sharp object.
Can you clean golf clubs with WD40?
Remove the golf clubs from the bag; if you spray WD40 on your bag, it will smell for a long time. Spray the WD40 on your irons and wedges and let it sit for a few minutes. Take a dry cloth and wipe the WD40 off the clubs. Once it is off, you can wash and rinse the clubs.
What is refinishing irons?
Refinishing Irons. The refurbishing process changes depending on your irons. If you play chrome-forged, carbon steel irons, you may want to rechrome them to bring back the luster of their original state. Most refurbishment jobs target performance, by repairing nicks, scratches and dents. Rechroming.
How to paint a driver's sole?
Focus your efforts to the sole and the crown. Begin painting. Begin with the crown, find a color match for the crown, then slowly apply smooth strokes with your paintbrush.
Can you use steel wool on a driver?
Warning: Never use steel wool on your driver and fairway wood club heads. It will scratch the crown and face, and be sure to dry the head completely to avoid oxidation. Steel wool bristle club cleaners are great at getting dirt and sand out of iron grooves, but never clean your driver with them. Let the club dry.
Is refurbishing a club difficult?
Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs. Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs.
How to clean rust off golf clubs?
A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
What to put on golf clubs to prevent rusting?
Wax. This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.
Does rust on a golf wedge increase spin?
Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
Can a Cobra wedge rust?
Cobra Trusty Rusty Wedge. Leaving you’re club outside or even storing it in unfavorable conditions can result in rust. Contrary to popular belief, a little rust is not the end of the world. For some used clubs, especially wedges, some rust may even be beneficial. Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase ...
Can steel wool be used on golf clubs?
Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.
Can you use industrial rust remover on plastic?
If none of the other solutions, you can go to a hardware or auto parts store and purchase industrial rust remover. This is a harsh chemical that can damage club finishes, plastics, and other materials. Be sure to only get the rust remover on the surface you want to clean. Also, follow the instructions specified by the specific product you use.
Step 1
Before you take on a time-consuming and potential total refinish of your clubs, clean them thoroughly. Using a soft cloth and a light soap, gently wipe the club face and head. Use the wire brush to clean the grooves on your irons and wedges.
Step 2
If you determine more than a cleanup is needed, it's time to refinish.
Step 3
Target the grooves on your Ping irons--use the groove tool to sharpen and even out any damage. Clean, consistent spin on the green depends on the sharpness of your grooves. Use slow, even strokes in the grooves with light pressure until you get a consistent path.
Step 4
Detail the sole. Begin by buffing it back to its original shine. With your paintbrush, slowly fill in around the detailing of the sole, like the iron identification number. Be sure to quickly remove any spilled paint.
Step 5
Let the paint dry overnight, then re-examine the work. If you need to cover up more or lightly remove excess paint, do it quickly. Then let the club dry overnight again. The fresh paint will be more susceptible to staining in the first few days after refinish, so try to time your work when you won't be playing.
What do dime size spots on golf clubs mean?
If you already have them in hand and like what you see and feel, those could already be your lifetime clubs and you should do nothing more with them than to use them frequently.Those dime size spots are a sign of skill that may or may not belong to you but will certainly make golf hustlers a bit more careful around you. I view people who own clubs that have that kind of wear as someone to be approached carefully and respectfully especially where bets are concerned. At the very least, it will buy you respect until your first swing.
Does iron tarnishing affect grooves?
Each of the irons has a dime sized spot that is tarnishing on the sweet spot from previous use. It does not affect the grooves nor ball flight as far as I can tell. Is there an easy way to clean the metal to polish them up or will I have to send them out for refurbishing.
Sole and Toe Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We grind the sole and remove any damage and scratches. We then buff the area to bring back the shine. Please note that all orders that include refurbishment must be placed by phone.
Club face Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We polish the face and remove many of the cosmetic damage and scratches. We then buff the area to bring back the shine.
ADDITIONAL SERVICES
In addition to our refurbishment programs, we offer many additional customization services for your clubs. When your getting your clubs serviced, you might want to add on these services to increase the life of your new club.
Support TST Affiliates
Direct links for Mevo, Mevo+, and Pro Package. Save 10% on Mevo with coupon code "IACAS" as well.
Posts
I have been playing Ping G25 blue dot irons. My contact mark is about half a golf ball off center towards the hosel. I purchased a used set of Ping G irons in black dot. Anyone have experience with these two irons? Will I have a better...
How to get scratches off irons?
1. Squeeze a pea-sized drop of metal polish onto a polishing cloth. Polishing your clubs can help to prevent them from rusting and can help to remove small scratches from the irons. Keep in mind, though, that metal polish is really strong, so you only need a small amount.
How to restore shine to golf clubs?
Buffing your golf clubs is a quick and easy way to restore their shine. Before you buff your clubs, it is best to clean them first, as this makes the buffing process more effective. Once they are clean, smear metal polish over the head of the club, allow it to sit for a minute, and then rub it off. This will leave your golf clubs looking fresh ...
How to clean golf clubs with dishwashing detergent?
Fill a bucket with warm water and then measure in the dishwashing detergent. Use your hand to mix the water and detergent until the water begins to bubble. If you don’t have a bucket, fill a deep sink or a bath with water and detergent instead. This is a great way to deep clean your clubs, even if you aren’t planning on buffing them.
How to make a golf club look shiny?
Use a clean cloth to rub the head of the club in a circular motion until all of the polish is absorbed into the cloth. This helps to buff the club and will leave your club looking shiny and new. To make your club look extra shiny, rub your club for an extra few minutes.
What to do if you run out of golf club polish?
If you run out of polish, simply squeeze a little more onto your cloth. If you are sensitive to chemicals, wear gloves when buffing your golf clubs to stop your hands getting irritated from the polish. ...
How to keep golf clubs from rusting?
Dry the clubs with a soft cloth. This helps to prevent the clubs from rusting and allows you to remove any loose dirt that is still on the clubs. Start at the top of the club and then work your way down to the bottom. This helps to prevent drips from rolling down the clubs. Microfibre cloths work well for this job.
How to get dirt off golf clubs?
Place the heads of the clubs into the water and then leave them to soak. This helps to dissolve any dust that is trapped inside grooves and also loosens any dirt or grass that is stuck on the clubs. Place the bucket by a wall and lean the clubs up against it if you are worried about the clubs falling over. ...
How to get scratches out of golf clubs?
To remove deep scratches, try using a buffing compound on a soft toothbrush. Rub the brush against your club in a forward and backward motion . This is the safest method and it shouldn’t ruin your club.
What causes scratches on golf balls?
After all, you’re smacking a metal stick against a solid golf ball. Light marks is the most common type of damage you’ll come across, and the easiest to remove. The small and often fine scratches are caused by everyday play. Chipping and fairway shots are the most often culprits.
What does it feel like to have a new golf club unwrapped?
The feeling of a new unwrapped golf club is intoxicating. It’s nice seeing the irons surface and sun combine into one shimmering beauty. However it doesn’t take long for the shine to wear off. The truth is scratches, sky marks and scuff marks on golf clubs are a reality for all golfers. While some golfers wear these marks as badge of honor, ...
Why are there sky marks on my golf clubs?
Aside from the embarrassment, sky marks are quite ugly to look at many players tend to clean them. To avoid causing sky marks on your clubs , don’t tee off too high.
How to clean a golf club with a light compound?
Always choose the light version, as heavier compounds can damage your clubs coat. Clean your club with a damp microfiber cloth. Then allow club to air dry. Pour a small amount of rubbing compound on to a clean cloth. Start rubbing the cloth on to the sky mark. Use a circular motion when cleaning your club head.
How long does it take for paint to dry on a golf club?
Using a fine paint brush, paint over the sky mark in a back and forth motion. Allow up to 4 hours for the paint to completely dry.
Can golf clubs hit rocks?
However clubs are not designed to hit rigid objects like rocks, stones and lake banks. Furthermore they are not designed to be thrown, or smacked against the ground which many golfers do out of frustration. Deeper scratches are difficult to fix, and this is why most golfers won’t bother removing them.