Repairing the groove face of your clubs is relatively easy, if you have the proper tools. Step 1 Clean the face of your clubs, including the grooves. Use warm, soapy water with a couple of tablespoons of liquid dish detergent and a scrub brush.
How do I repair the groove face of my clubs?
Repairing the groove face of your clubs is relatively easy, if you have the proper tools. Step 1 Clean the face of your clubs, including the grooves. Use warm, soapy water with a couple of...
Why should you regroove your golf clubs?
It’s necessary to regroove your clubs on a regular basis to improve your backspin performances. This particular model can be used to regroove U grooves, V grooves as well as square grooves. It’s also USGA rules and regulations compliant.
Do the grooves in a golf club fade?
The grooves in a golf club tend to become light and might fade after some time. This is a problem faced by almost all the golfers. It is not necessary to buy new clubs every time this happens.
Do you open the club face in golf?
Here’s why you can trust us How to open the club face in golf can catch players out. Here's how to utilise a bit of extra loft and do it with confidence. There are times during the course of a round, when you will need to open the club face to create loft or deliver a fading ball flight.
Can you Regroove a golf club?
It's necessary to regroove your clubs on a regular basis to improve your backspin performances. This particular model can be used to regroove U grooves, V grooves as well as square grooves. It's also USGA rules and regulations compliant.
How do I restore my golf club face?
0:004:48Reconditioning a Golf Club Face Tutorial - DIY Golf Club RestorationYouTubeStart of suggested clipEnd of suggested clipSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little moreMoreSo i'll throw some masking tape on i also have a little bit of aluminum tape which is a little more durable than just masking tape i'll probably put that just on the edges.
How do you restore grooves on a golf club?
0:035:13how to use your 6-head Groove Sharpener - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn this video I'm going to show you how to use the tick tock golf groove sharpener to restore yourMoreIn this video I'm going to show you how to use the tick tock golf groove sharpener to restore your clubs to their original groove pattern.
How do I restore my wedge face?
1:506:59Golf Wedge Restoration - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne. And simply clean it out. A little wd-40 can help in this situation. Too the goal is to not makeMoreOne. And simply clean it out. A little wd-40 can help in this situation. Too the goal is to not make them non-conforming but to just clean them out. Get them nice and pure.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
How do you make old irons look new?
5:0124:18how to refurbish an old golf club 2020 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's done on an unstitched buffing wheel with that yellow polishing comp with the yellow polishingMoreThat's done on an unstitched buffing wheel with that yellow polishing comp with the yellow polishing compound right this guy.
Can you sharpen grooves?
Golf clubs groove sharpeners definitely work. When a groove sharpener is inserted in the indents and carefully guided back and forth, the grooves' edges will reform and sharpen. Using a groove sharpener can give a golf club a little more grip on a golf ball.
Is sharpening your grooves illegal?
The rules of golf state that grooves must be no more than 0.035 inches wide, 0.020 inches deep and 0.075 inches from any adjacent grooves. If you play competitively, using a groove sharpener could make your clubs non-conforming and illegal for competition.
Can you reface golf clubs?
Once your club is clean, you may want to give it a fresh new finish. Professional club finishing can be expensive. You can expect to pay around $50 per club to get them professionally refinished. This can be a fun way to bring life back into a beloved or special set.
Can you Regroove wedges?
Getting the wedge regrooved is an option, but it's an inexact process that's probably not worth the time. "A lot of things can happen when you regroove an old wedge," said Kyle Cronkright, the director of club fitting at the Jim McClean Golf School's Texas Golf Center (Ft.
Can you resurface a golf wedge?
Refurbishment involves removing scratches, dents and dings from the wedge head, sole, paint fill, and resharpening the grooves, either original or deep per the player's wishes. Not every wedge can be restored, as sometimes the damage is just too much to repair.
Can you sharpen your wedge grooves?
The answer is, yes, Golf groove sharpeners work to give your irons and wedges an increased spin rate.
How to clean a golf club?
Clean the face of your clubs, including the grooves. Use warm, soapy water with a couple of tablespoons of liquid dish detergent and a scrub brush. Get as much of the built-up debris from between the grooves as you can.
What is groove repair?
Golf Club Groove Repair. Grooves provide bite and help put backspin on the ball. Cleaning and sharpening the grooves of your golf clubs may be something that you don't consider doing that often. But grooves are vital to performance on the course. Properly cleaned and honed grooves help with the backspin of the golf ball.
How to keep a golf club sharpener from slipping?
Run masking tape along the ends of your grooves. This will keep your groove sharpener from damaging the face of the club should you accidentally slip out of the groove.
Why are grooves important?
But grooves are vital to performance on the course. Properly cleaned and honed grooves help with the backspin of the golf ball. Dirt-clogged and worn-down grooves won't bite or give you the spin you're looking for. Repairing the groove face of your clubs is relatively easy, if you have the proper tools.
How long does it take to recondition a golf club?
First, don’t try to recondition it yourself. Second, to get it done professionally may take up to six weeks depending on whether the club head is chrome plated or not. Most forged iron clubs made of mild steel, will need to be protected from rusting, which requires a layer of chrome to be deposited on the head after the grooves have been milled, rolled or stamped into the face. Some clubs are forged but made of stainless steel, which do not require chrome plating. These, as with most cast clubs can be re-grooved and do not need the additional protective layer of chrome.
What happens when grass juice gets between the clubface and the ball?
It is only when grass juice gets between the clubface and the ball that the grooves really start doing their thing. This only happens out of relatively light rough not the real juicy 4” stuff where it doesn’t matter what type of grooves or condition of those grooves makes any difference.
Can a hand held tool be used to measure grooves?
A hand held tool will not only do a number on the grooves but will most likely render them non-conforming because of the tight specifications the USGA has for grooves, i.e. depth, width, ratio of groove-width to pitch, radius of groove edges and even groove straightness.
Can you use a golf club without penalty?
This means for example, even though the face is concave or the grip has indentations for you fingers because this is how it wore down through normal use, it is OK to use it without penalty but as soon as you start reconditioning the club it must be considered new.
Can you recondition a wedge with a hand held groove tool?
First, let me say that using a hand-held groove tool is a risky way to recondition the grooves in your wedges. The reason is that as soon as you alter (recondition) the face of the club it is considered new and ruled on accordingly.
What happens if your golf clubs are sharp?
If your grooves are clean and sharp, you instead may have scratches on the face of your club. See how I remove scratches and marks on my own clubs (read my article)
How long before a golf game should I sharpen my grooves?
It’s necessary to exert caution while using these DIY methods to sharpen the grooves. I recommend you attempt any homemade methods at least a few days before a golf game. This is because you don’t want to injure yourself so close to playing.
Why do you regroove your wedges?
Regrooving is necessary to ensure that your wedges and irons perform well in tournaments. While it’s advised to get your clubs sharpened at an expert store, you can attempt to perform the sharpening procedure yourself.
How to use groove sharpener?
The groove sharpeners will have sharp metal edges which are used to clean and shape out the grooves. You will need to be aware of the shape of your groove so as to not to change it. You can insert the sharpener into the wedges and slowly clean out the grooves. They will appear to be very sharp and hence it is necessary to perform the technique firm but slowly.
What tool to use to sharpen wedges?
Many people have found that using some simple tools found at the house such as a screwdriver can help in doing the job. A simple flat headed screwdriver can be used to sharpen the wedges. The screwdriver needs to be of a size suitable for the groove (not too big or small). Carefully run them through the grooves.
How much does a groove cleaner cost?
This product can easily be used to clean out the grooves and sharpen them within a few minutes. It costs less than $11 USD and is available in a lot of online stores. It can be used on wedges, irons and any other golf club that has grooves on its club face.
How much does ping golf sharpener cost?
Golfers who have used this are generally happy with the way it sharpens the grooves. This model is also available for a cost of about $20.
Why do you regroove your shots?
The purpose of regrooving is to make your grooves sharper as they get dull after a lot of use. Having deeper & sharper grooves allow you to have more control and spin in your shots.
What is Kelly's custom golf?
Kelly’s Custom Golf offers precision milling of USGA conforming square and "V" grooves for your irons. Re-grooving will improve control and direction in your shots, lowering your scores!
How long has Kelly's Golf been in business?
Most golfers can’t go through this process on their own and need the help of a professional. We have been in business for 34 years providing premier custom clubs, club repair and modifications. Kelly’s Golf serves golfers of all ages and skill levels.
What tools do you need to grip a golf club?
First, you will need some tools: try to acquire a butane torch, grip tape, grip solvent, a shaft vice clamp, a hook blade, a table vice and ( you guessed it) an entirely new grip. Using these tools that can be found at home, re-gripping your club has never been easier.
How does a golf swing affect performance?
So, when the grip of your golf club deteriorates, so will your performance. An overly worn or torn grip will burn through gloves, make the club slippery and hard to handle and inevitably impact the quality of your play.
How to make sure grip is straight?
You’re almost done! In the last steps, pour the grip solvent over the tape and slide the grip onto the shaft. Finally, give the grip one last check to make sure it is straight. That’s it.
When would I want to open the club face?
Opening the face is important, particular for bunker shots. By doing this, you'll expose the bounce on your wedge and as long as you know how to use the bounce, you'll “slide” the club face under the ball and pop it out on a cushion of sand. If you don’t do this you’ll just dig the leading edge into the sand and gently tunnel like a gopher.
Does an open club face cause a slice?
If the club face is open to the path of your swing, you will create the sidespin that causes a slice. This usually happens if your club face is cutting across the ball through impact. There could be a few reasons for this from how you grip the golf club to coming over the top at the start of the downswing.
Re-Grooving Can Help
The Purpose of Re-Grooving
- The purpose of golf club re-grooving is to redefine the edges by removing bent over metal as they get worn and beat up during play. Restoring and re-grooving your grooves will help your short game to generate more spin and control. Deeper and sharper grooves provide more spin, and subsequently more control. Sharp grooves generally can produce twice the backspin.
How Often to Re-Groove
- It is strongly suggested that you have your irons thoroughly cleaned and re-grooved every 3 – 4 years depending upon how much you play. Club faces should be cleaned and grinded to smooth out irregularities, remove rust, and eliminate the majority of scratches/dings prior to re-grooving. As opposed to some theories floating around, rust on clubs is ...