- Air Compression. Attach an air compression machine to your club by inserting a thin air compressor nozzle into the small hole in the cap of your golf club grip.
- Grip Removers. Obtain a grip remover with a spring-rod. Many golf gear manufacturers carry them to aid in removing old grips from clubs.
- Solvent Pump. Fill a canister with acetone or another adhesive-dissolving solvent. Insert the needle of the canister into the space between the metal of the club and the grip.
How do you save a golf club grip?
But if you wish to save and reuse the grip – or perhaps you just don’t want to wield a knife around the club’s shaft – you can literally blow the grip off the club, using an air compressor. The grip will slide off easily and be available for reuse.
How do you use an air compressor on a golf grip?
You can use the plastic sleeve that sometimes comes in a golf bag to help organize your clubs, or the cardboard insert from a roll of paper towels. Leave about 2 inches of space between the top end of the sleeve and the butt end of the grip. Pull the air compressor’s trigger, while simultaneously twisting the grip forward and back on the shaft.
How do you organize your golf clubs in your bag?
You can use the plastic sleeve that sometimes comes in a golf bag to help organize your clubs, or the cardboard insert from a roll of paper towels. Leave about 2 inches of space between the top end of the sleeve and the butt end of the grip.
How do you put a sleeve on a golf club?
Put a sleeve around the shaft. You can use the plastic sleeve that sometimes comes in a golf bag to help organize your clubs, or the cardboard insert from a roll of paper towels. Leave about 2 inches of space between the top end of the sleeve and the butt end of the grip.
Can you remove golf grips and reuse them?
Golf grips can be removed and reused if they are in relatively good condition and if you are able to remove neatly without destroying them. If you are removing an old, damaged, or worn-out golf grip, cutting it off is the easiest option.
How do you remove a golf grip without ruining it?
3:394:47How to Remove a Golf Grip without Damage or Cutting (Poor Man's ...YouTubeStart of suggested clipEnd of suggested clipIn a vise that we can pull this off and show you how easy it is okay. So we're going to place it inMoreIn a vise that we can pull this off and show you how easy it is okay. So we're going to place it in a vise secure it and at this point we're just going to step back and this the grip dry.
How do you remove old golf grips?
0:411:22Golf Basics : How to Remove a Golf Grip - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold your grip. And just peel. Once you start I grab it by the by the excess. That's sticking outMoreHold your grip. And just peel. Once you start I grab it by the by the excess. That's sticking out and I pull up. And there it is I'm caught in Eliot. And that's how do you remove a golf grip.
Can you take a grip off a golf club?
0:334:25How To Remove A Golf Club Grip - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that you can put a little force on and pull it away now i've also seen some demonstrations whereMoreSo that you can put a little force on and pull it away now i've also seen some demonstrations where guys will use it like this and kind of use the shaft as a brace. So that it will kind of pry.
How do you remove grips without cutting them?
2:595:36The Easiest Way to Remove Golf Grip Without Damaging it - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust put it back on itself a little bit. And pull it. Back. Pull you need a bit of brute strengthMoreJust put it back on itself a little bit. And pull it. Back. Pull you need a bit of brute strength for this voila still got it.
What is the easiest way to remove golf grip tape?
Using a tape stripper, peel the tape off the shaft by pushing the tape stripper through the length of the tape. Rotate the shaft after each strip is taken off until all tape is removed. On a graphite shaft, after warming the tape, it is recommended to peel the tape off by hand. Tape strippers can damage graphite.
Do you have to remove old golf grip tape?
Remove old grip tape before you throw on a new grip. Unless by some miracle the tape under your grip is still sticky and uniform after removing your old grip, you're going to want to get rid of all the old tape completely.
How do you remove griptape?
6:158:50HOW TO REMOVE YOUR GRIP TAPE THE EASIEST WAY TUTORIALYouTubeStart of suggested clipEnd of suggested clipAs long as it's heated up and you're just pulling it off all in one chunk.MoreAs long as it's heated up and you're just pulling it off all in one chunk.
How do you remove Griptape from a golf grip?
1:375:48How To Regrip A Golf Club | Golf Pride - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you scrape off the tape as you like you peeling an apple. Takes a little bit longer. But againMoreAnd you scrape off the tape as you like you peeling an apple. Takes a little bit longer. But again it works. The next step is simply to install. The two-sided tape and slip on the new grip.
How do you remove and replace golf grips?
0:232:10How to Install Golf Grips - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the old grip with utility blade be careful and always cut away from yourself at all timesMoreRemove the old grip with utility blade be careful and always cut away from yourself at all times next peel back and remove the old grip.
Can you reuse grip solvent?
Can be reused over and over again. Quick dry times – grips can be used in less than an hour. Pleasant citrus smell ideal for household use.
What can be used as golf grip solvent?
Mineral spirits, denatured alcohol, acetone, nail polish remover or charcoal lighter fluid, all provide adequate deactivation of grip tape to install new grips. They also evaporate relatively quickly to allow the grip tape to bond to the grip in a relatively short amount of time, often less than an hour.
What can be used as golf grip solvent?
Mineral spirits, denatured alcohol, acetone, nail polish remover or charcoal lighter fluid, all provide adequate deactivation of grip tape to install new grips. They also evaporate relatively quickly to allow the grip tape to bond to the grip in a relatively short amount of time, often less than an hour.
How do you remove a Superstroke grip?
With that, you can poke the needle tip through the grip and inject solvent beneath the grip along the shaft. That way you can wet the double-sided tape in a few different spots – then wiggle it around to spread the solvent – and lastly, the grip can be slid off easily.
How do you use the V groove grip remover?
2:273:27GRIP SAVING - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the mouth of the grip open slightly. And pour a small amount of grip solvent into the mouth ofMorePull the mouth of the grip open slightly. And pour a small amount of grip solvent into the mouth of the grip. This will allow you to slide the v-groove grip remover. Down into the grip a few inches.
How do you change golf grips?
0:232:10How to Install Golf Grips - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the old grip with utility blade be careful and always cut away from yourself at all timesMoreRemove the old grip with utility blade be careful and always cut away from yourself at all times next peel back and remove the old grip.
How much space do you need for a golf grip?
Leave about 2 inches of space between the top end of the sleeve and the butt end of the grip.
Can you blow off a golf club grip?
If you’re removing an old, worn out or damaged grip from a golf club, cutting it off is an easy option. But if you wish to save and reuse the grip – or perhaps you just don’t want to wield a knife around the club’s shaft – you can literally blow the grip off the club, using an air compressor.
How To Remove And Replace Golf Club Grips
Firstly, I will explain easy ways on how to remove golf grips so you can pick the method that you like, then I will explain how to reuse the golf grips.
How To Replace Golf Club Grips
Use a blade grip remover to remove the tape on the grip, or you can cut it with a razor blade, then use a razor blade to peel off the tape on the shaft
How Do You Remove A Golf Grip Without Ruining It?
Take your coat hanger and bend into place to the same size as a golf grip and work it into the top of the grip about an inch in the grip and workaround into the grip by spinning the shaft
Feedback
I just regripped a fairway and now have decided to swap out the shaft. Is it possible to remove the grip on the old shaft and use it on the new shaft. Its not a big deal as its only a few extra bucks for a new grip, just curious if this could be done.
Feedback
Yes you can re- use the grip.It's very simple if you have a v groove grip remover.If you go to the Golf Works site and search part # VGGR .They are around $20.It very easy to use.Just slip the metal rod between the grip and the tape,pour a little solvent in the v groove on the rod and slowly work the rod around the shaft as you slip it further into the grip.When it begins to bind add a little more solvent and continue this procedure until you reach the bottom of the grip.Once the the seal created by the tape is broken the grip slids off fairly easily.I save a lot of good grips this way.Hope this helps.G.
Feedback
definitely re-usable unless its a cord...once you stretch the cord installing them they never feel the same when you try to reinstall
Feedback
I always use a product like this: [url="http://www.golfworks.com/product.asp_Q_pn_E_GS6"]Pressurized grip remover [/url] I've worked in 3 different golf shops and they have all preferred this method.
Feedback
I just regripped a fairway and now have decided to swap out the shaft. Is it possible to remove the grip on the old shaft and use it on the new shaft. Its not a big deal as its only a few extra bucks for a new grip, just curious if this could be done.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Series Navigation
Have you ever wanted to make an adjustment to one of your clubs, but had to cut the grip off to do so? Have you ever cut off a brand new grip? Do you cringe at the thought of ruining a grip that could be used for many years to come? If so, you might want to consider learning how to save your golf grips for future use rather than cutting them off.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
