- Before removing the alternator, you need to remove the serpentine belt tensioner and belt. Refer to the Serpentine Belt Tensioner removal video.
- Remove the two bolts from the alternator.
- Now that the bolts are out, pull the alternator off the bracket. Walking it back and forth to aid in removal.
- Next disconnect the wire connectors. Take the main battery cable off and the connector. ...
- Remove the cable off and then lift the alternator out.
What tools do I need to remove the alternator on a Volkswagen?
Today, we're going to be removing the alternator on a Volkswagen. The tools we're going to need for this job is going to be a 13 millimeter socket with a ratchet and an eight millimeter wrench or socket. B efore removing the alternator, you're going to need to remove the serpentine belt tensioner and belt.
How do I replace the alternator?
Take the main battery cable off and the connector. Remove the cover on the battery connector and then unscrew it (don't lose the cover, it needs to go back on when you are done). Remove the cable off and then lift the alternator out. Hey, everybody.
How do you remove a serpentine belt from an alternator?
Refer to the Serpentine Belt Tensioner removal video. Remove the two bolts from the alternator. Now that the bolts are out, pull the alternator off the bracket. Walking it back and forth to aid in removal. Next disconnect the wire connectors.
Why is my car charging but my alternator is not working?
If you suspect alternator trouble, you need to check to see that is operating correctly, and is indeed the cause of the problems with your charging system. Sometimes bizarre electrical problems can be caused by a number of faults other than the alternator. It's important to troubleshoot the system prior to replacing your alternator.
How do you remove a VW alternator?
0:112:18How To Remove A VW Alternator ~ Salvage Yard Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore removing the alternator you're gonna need to remove the serpentine belt tensioner. And beltMoreBefore removing the alternator you're gonna need to remove the serpentine belt tensioner. And belt check out the other video I did showing exactly how to do that now that we have the belt.
Is removing an alternator hard?
Replacing an alternator can cost you several hundred bucks at the local repair shop, but it's one of the simplest repairs you can do at home. With a few tools and about an hour you can swap it out yourself -- and keep your dough in your pocket where it belongs.
How do I remove and replace alternator?
1:3911:52How to Replace an Alternator - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's begin anytime. You work on the electrical system the first thing you want to do especiallyMoreSo let's begin anytime. You work on the electrical system the first thing you want to do especially when changing out the alternator. Take off the negative terminal on your battery. Make sure it's not
How long does it take to remove an alternator?
one to two hoursThis is a common question with an easy answer. The make and model of your vehicle will determine the exact time it takes to replace the alternator, but usually, one to two hours is sufficient.
Can I replace an alternator by myself?
In general, it will take about two hours for you to replace an alternator on your own, though this could vary somewhat depending on your knowledge of car mechanics. If you take your car into a shop in order to have the alternator replaced, timing may vary somewhat, and you may have to leave the car for the day.
How long does it take a mechanic to change an alternator?
about two hoursReplacing an alternator will take a professional about two hours. However, that doesn't mean your car will only be at the shop for two hours—there may be a wait before a mechanic can address your ride. Plus, if the shop needs to get parts delivered, it will take even longer.
What tools do I need to remove an alternator?
In addition to a replacement alternator, you'll need some tools:Hand tools like ratchets, sockets, and wrenches.Belt tensioner tool.Gloves and safety gear.Battery tender or memory saver, if necessary.Jack, jack stands, and wheel chocks, if necessary.
Do you have to replace battery when replacing alternator?
Your battery should be one of the first things on your checklist after installing a new car alternator. Any installation guide will say that you need to disconnect the battery before installing the new alternator. So, at the very least, you need to make sure that you reconnect it.
How do I test to see if my alternator is bad?
First, open the hood and start the car. While the engine is running, remove the negative cable from the battery. If the vehicle stalls or dies, the alternator is likely bad. This happens because the alternator is not generating enough electricity to keep the engine running on its own.
How much does it cost in labor to change an alternator?
It usually takes two to three hours to replace an alternator. Depending on the mechanic's hourly fee, that's about $200 in labor costs. If you use OEM parts, you can expect to pay between $200 and $350 for a new alternator. If you don't mind using aftermarket parts, you could pay between $100 to $200 for a new part.
What causes an alternator to fail?
Alternators have a number of moving parts, so as they get dirty and are subjected to extreme temperatures, those internal components can wear out, causing the alternator to go bad. One of the most common problems you're likely to experience with an alternator is a failure in the bearings.
How much does it cost to replace an alternator UK?
between £100 and £700How Much Does an Alternator Cost in the UK? Alternator Repairs cost between £100 and £700 in the UK. The average is between £150 to £300 and, while refurbished car alternators ar available, they don't offer that much of a saving.
Instructions
Hey, everybody. Charles from HumbleMechanic.com back with another DIY and Drive tutorial with Pull-A-Part Used Auto Parts. Today, we're going to be removing the alternator on a Volkswagen. The tools we're going to need for this job is going to be a 13 millimeter socket with a ratchet and an eight millimeter wrench or socket. B
VIDEO TRANSCRIPT
Hey, everybody. Charles from HumbleMechanic.com back with another DIY and Drive tutorial with Pull-A-Part Used Auto Parts. Today, we're going to be removing the alternator on a Volkswagen. The tools we're going to need for this job is going to be a 13 millimeter socket with a ratchet and an eight millimeter wrench or socket. B
What does an alternator charge?
Click here to order! The alternator charges the battery and provides your car with a constant source of electricity while the engine is running. Over time, the alternator will begin to fail and cause trouble with the various electrical devices in the car. If you suspect alternator trouble, you need to check to see that is operating correctly, ...
How to neutralize acid in car?
Dousing the area with a water and baking soda solution should help considerably to neutralize the acid, and prevent it from eating away at the metal. An important item to check on your car is the engine ground strap. The engine is electrically isolated from the chassis by rubber motor mounts.
Can a belt break on an alternator?
Modern belts seldom break, but they get brittle and glazed with age, and can slip on their pulleys. Replace the belt with a new one as required. The next item to check is the voltage at the battery. Before performing any tests of your alternator, charge and test your battery.
Post
I'm trying to remove the alternator from my Clipper cabriolet, it's a 1990 1.8, but I can't seem to find any images / guidance / youtube vids anywhere online…can anyone help me? I haven't got very far on my own!
Post
theres the 13mm adjuster bolt on top, plus another at the end of the adjuster bar. at the bottom pivot theres an allen bolt, be sure to clean the head out nice and get a decent allen bit tapped fully home otherwise it can easily round out.
Post
You might need to remove the top cam cover to gain access to the Allen bolt, as rubjonny says be careful with the head as that's the bolt that can seaze, mine has and you need to remove a lot more stuff to remove the bracket holding it on.
Post
thanks guys…it's a bit dark to go messing now so I'll have a look in the morning. Incidentally, do you know which Haynes manual I should get? I have no. 1081 but it's not always relevant?
Post
Grr missed both of those but I've got my eye on another one…and I really need it!
Post
Basically, my battery keeps going flat! For a few months before the end of last year, the car was struggling to start despite having had a new starter motor. I put a new battery in about 3 months ago ; it lasted about 6 weeks and then it too started to go flat.
Post
What make and amps is your battery and how many years guarantee does it come with? If you know what code it is eg (063 or 075)
