How do I remove my axle?
4:097:50How To Remove A CV Axle– AutoZone Car Care - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt won't take much effort to get that axle to break loose. You want to position it so the nut isMoreIt won't take much effort to get that axle to break loose. You want to position it so the nut is just flush with the face of the axle.
What is the easiest way to remove a CV axle?
You can use a small pry bar or sturdy flathead screwdriver to pry the axle from the joint.If the axle doesn't immediately come loose, try twisting it back and force to break the seal.It's normal for some transmission fluid to leak out as you remove the axle from the cv joint.More items...
How do you remove a drive shaft axle?
2:0013:28How to Replace a Driveshaft / CV Axle | Part 01 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then grab a big socket 36 millimeter in this case and a big breaker bar and with a bit of elbowMoreAnd then grab a big socket 36 millimeter in this case and a big breaker bar and with a bit of elbow grease. Maybe some leg grease as well it should break loose. Okay now that's cracked loose.
How do you remove a CV joint from a VW?
6:047:15VW Golf Jetta Driveshaft CV Joint Removal Simple Easy StepsYouTubeStart of suggested clipEnd of suggested clipNow remember once you feel a little bit of movement. And you can progress onto. Just removing theMoreNow remember once you feel a little bit of movement. And you can progress onto. Just removing the night itself and hearing it knocking it straight up.
How do you remove a CV axle without a puller?
0:020:49How to remove a STUCK CV AXLE (No slide hammer required)YouTubeStart of suggested clipEnd of suggested clipSo you're gonna press it right against right there of course you're supposed to do it with two handsMoreSo you're gonna press it right against right there of course you're supposed to do it with two hands then on the bottom you're gonna tap it with a hammer. Just gonna slowly tap. It.
How do you remove CV axle with slide hammer?
0:383:20Use a Slide Hammer to Remove a Stuck CV Joint - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's the adapter that goes on the slide hammer that'll. Help you pull a CV joint out or an axleMoreSo here's the adapter that goes on the slide hammer that'll. Help you pull a CV joint out or an axle. And here's my slide hammer pick this up from I think autozone.
How do you remove the rear CV axle?
5:0611:59How to Replace Rear CV Axle 10-15 Chevy Camaro - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull down on the top of the steering knuckle if you should be able to work the CV axle out. And setMorePull down on the top of the steering knuckle if you should be able to work the CV axle out. And set it off to the side. Now. If you have a CV axle puller. That's usually the best way to do this.
How do you remove driver side CV axle?
2:1211:59How To Replace Driver Side CV Axle Shaft 2007-2011 Toyota CamryYouTubeStart of suggested clipEnd of suggested clipApply some penetrant in this. Area. Then take a hammer and a punch you're going to come right in theMoreApply some penetrant in this. Area. Then take a hammer and a punch you're going to come right in the center right here and start driving this axle out of the bearing.
How do you remove a stuck axle from a hub?
0:190:52How to Remove a Stuck Axle from a Hub Using the OTC Heavy Duty ...YouTubeStart of suggested clipEnd of suggested clipI do is I use a little bit of penetrating. Oil on it spread to help things move then you bolt theMoreI do is I use a little bit of penetrating. Oil on it spread to help things move then you bolt the tool up to the hub here. And as you screw the center bolt in it pushes the axle. Through.
How do you remove a CV joint from a gearbox?
3:446:17Removal of inner CV Joint from transmission - without damageYouTubeStart of suggested clipEnd of suggested clipSo you want to be very careful not to bend this in here and damage. It. But what you can do is takeMoreSo you want to be very careful not to bend this in here and damage. It. But what you can do is take a pry bar and use the stud nuts as a pivot point or a fulcrum point as long as it stays.
How do you change a CV joint?
1:144:10How to Replace a CV Axle in Your Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe whole assembly swings off you might have to push a little then it comes out then he is a hammerMoreThe whole assembly swings off you might have to push a little then it comes out then he is a hammer and a drift chisel to hit the end of the CV joint.
How do you replace the outer CV joint on a golf 1?
2:139:53REPLACING VW GOLF MK1 CITI GOLF INNER CV - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that we can move the lower control arm down as you've got the low control arm ball going to thisMoreSo that we can move the lower control arm down as you've got the low control arm ball going to this you're going to push it down a little bit put on the shock. And out comes our CV joint.
How to remove the rear wheel of a golf cart?
Remove the rear wheel of the golf cart. Take off the brake drum from its place. Insert a 90-degree snap ring pliers through the holes in the hub and remove the snap ring. Slide the axle out of its position. You may require a slide hammer to help you with releasing the bearing from the axle if it’s stuck on to it.
How to remove rear axle snap ring?
You can remove the rear axle snap ring on a Club Car using a pair of 90-degree snap ring pliers and a flashlight. Take off the rear wheel from the Club Car golf cart. Remove the brake drum from its place.
How to remove the shaft on a club car DS?
How to remove the axle shaft on Club Car DS. You will need a few chocks, a pair of 90-degree internal snap ring pliers, a floor jack and jack stands to remove the axle shaft on a Club Car DS. The steps given below can help you to take off the axle shaft from the golf cart. Keep the chocks before the front wheels of the Club Car.
How to tell if rear axle bearing is bad?
The most common giveaway sign of a bad rear axle bearing is a loud noise coming from the axle assembly. You can try one of the following tips to solve the problem.
What to use to knock off a burr on a ring?
If the groove that houses the ring is damaged with a burr on the edges, you can use the edge of a small three-sided file to knock off the burr. This is often helpful when the axle is installed.
How to remove rear axle seal on 2002 Club Car DS?
In a 2002 Club Car DS, you can remove the rear axle seal from the axle opening by popping it out using a seal puller. If you want to install a new axle assembly, you’ll have to do the above steps followed by fitting the new assembly in place and redoing these steps once again in the reverse order.
Where is the C clip on a golf cart?
You can also check for a C-clip at the backside of the golf cart that keeps the axle in position. This clip is often inside the axle tube behind the drum mounting flange.
If you are getting a sound from your rear wheels like a small jet trying to take off and it increases with the speed of the vehicle you may need a new rear wheel bearing
If the bearing has failed to the point of damaging the stub axle you will need to replace the stub axle as well. Note: Volkswagen considers the axle hardware to be single use only and new hardware must be used when performing this work.
Project Photos
Figure 1 With the wheel hub and bearing removed you can inspect the stub axle (red arrow). The stub axle should be smooth and even without any wearing, pitting, grooving or discoloration. The wheel bearing should fit tight on the axle and not turn around it.
Why does my drive shaft wear out?
Your drive axles or drive shafts can wear out over time or get damaged during use. The most common problem for drive axles is the tearing of the CV boot. This will cause the CV grease to be throw out from the CV joint and allow contaminants in. Lack of grease or contaminants in the CV will quickly lead to failure of the joint.
How many 12 point bolts are there on a flange?
There are six 12 point bolts holding the axle to the flange (red arrow) two shown). Some people like to remove the two 13mm blots (yellow arrows) holding the turbo shield (passenger side only) in place and remove it but it is not necessary. Loosen the six 12 point bolts holding the axle to the flange.
Can you use an electric impact gun on a car?
Electric impact guns can be purchased inexpensively and make a great addition to your tool kit. If you do not have an impact gun you can remove the center cap on the front wheel, leave the car on the ground and insert the 30mm socket through the center.
