Locate the governor spring in the engine of the cart next to the governor arm. This spring is adjustable with a threaded rod running through it and is mounted on a bracket. Raise the seat and take off the cushions covering the engine. In newer model carts, you may have to remove the seat screws for raising the seat.
Full Answer
How do you replace the seat cushions on a golf cart?
Process 1 Remove seat cushions. Now you can remove the seat cushions from your golf cart. ... 2 Plastic trim. Either way you will need to begin by removing any and all plastic trim on the underside, save this for re-installation after the new covers are in place. 3 Clean up. ... 4 New covers. ... 5 Stapling. ...
Where do the plastic trim pieces go on a golf cart seat?
This applies to the rear golf cart seat set as well, though you usually will not find the plastic trim pieces in place around the seat cushion base because the seat cushion is permanently fixed to it where as the front seat hinges to access the battery or engine areas.
Can you put a seat cover on a golf cart?
In MadJax defense, they have a massive selection of seat covers for each make and model of golf cart, so even if you can’t design your own, chances are you’ll find a really cool option. As long as you purchase the right model of cover for your specific golf cart, then installing the seat cover is pretty straight forward.
How do you remove the seat cover?
Then double check you are centered on the cover and pull from top to bottom first and pop a few staples into the top section and then pull cover snug around the bottom and pop a few more. (All thee staples are just to keep the seat cover aligned while you work around it and will be removed eventually).
How do you take the back seat out of a golf cart?
1:258:54Rear Flip Seat for Club Car® Precedent® | How to Install VideoYouTubeStart of suggested clipEnd of suggested clipAnd a 13 millimeter socket and remove our rear strut hardware remember retain all hardware next stepMoreAnd a 13 millimeter socket and remove our rear strut hardware remember retain all hardware next step we'll remove our lower strut hardware with an eight millimeter socket.
How do I take the seat off my EZ Go golf cart?
0:043:05How to Install EZGO Seat Covers - YouTubeYouTubeStart of suggested clipEnd of suggested clipBottom. Now we're going to pull the plastic trim up till it separates from the seat. Bottom. UsingMoreBottom. Now we're going to pull the plastic trim up till it separates from the seat. Bottom. Using some needlenose pliers remove all the staples to take the old cover off.
How do you put the back seat on a golf cart?
3:3811:40EZGO RXV Golf Cart Rear Seat Kit | How to Install Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're going to do is with the run a bolt free. Put a nut on the backside. Next we're going to putMoreSo we're going to do is with the run a bolt free. Put a nut on the backside. Next we're going to put the deck of the seat kit onto the brackets. So we'll just rest it right there on the bottom mark.
Is it hard to put back seats in a golf cart?
No problem. You can add the detachable rear seat golf bag accessory in just a few minutes. Follow the simple instructions on YouTube, and it will be ready to go in a few minutes. The easy on/off accessory takes seconds to set up each time you golf.
How do you reupholster a back seat on a golf cart?
1:0630:27How to Reupholster a Golf Cart Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipI would order two yards of each color of vinyl fabric on the underside of our backer board to giveMoreI would order two yards of each color of vinyl fabric on the underside of our backer board to give it a finished look we're going to staple on cushion underlining material.
How do you put the back seat in a ezgo RXV golf cart?
4:479:26EZGO RXV GTW Rear Flip Seat Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure you connect it to the slot. Once all the bolts are in position go ahead and tighten allMoreMake sure you connect it to the slot. Once all the bolts are in position go ahead and tighten all the bolts start from the trees. Then moving to the two in the back of the flip seat.
How do you convert a 2 seater golf cart to 4?
You should connect the footrest brackets and footrest before the seat back brackets and armrests. Add the seat bottom cushion, lean-back cushion, and lean-back brackets. And there you go! That's how you can convert a two-seat golf cart into one with four seats.
What is an ezgo txt?
The EZGO TXT Valor is the latest golf cart from Textron belonging to its 2020 edition. It is a gas-powered vehicle. It features a continuously variable transmission (CVT), and a rear axle ratio of 11.47:1. It has one 12V battery. The Valor's engine generates 13.5 horsepower.
What is a Club Car DS model?
Club Car DS Club Car made body changes in 1981 and introduced the “DS” model, and this model quickly became the flagship cart of the golf cart industry. The Club Car DS front and rear body panels were constructed of plastic and fiberglass.
How long is a golf cart with rear seat?
The average golf cart dimensions are around 92 x 48 x 75 inches for a standard 2 seat golf cart. The dimensions of different types of carts will vary the most in length due to the number of seats a golf cart can have. More seats added to a cart will add to its length but usually minimal amounts to the width and height.
How do you read a club car serial number?
The letters or letter at the beginning of the serial number (1) indicate the vehicle model, could be one or two letters. The following four digits (2) indicate the model year and production week during which the vehicle was built.
What is a golf cart seat cover?
What are Golf Cart Seat Covers? Unlike custom designed and upholstered seats, seat covers can be a great way to keep your nice custom seats protected, or add some style to those old, dull, hole-ridden leather seats.
What happens if you leave old seats on?
If you leave the old seats on with holes or rips, then applying the new seat covers will bring out the contour of the old seats. With more use over time those old holes or rips will become apparent in your new seat cushions.
What is the best golf cart brand?
EZGO is one of the most popular golf cart brands that you can buy. If you have an EZGO golf cart, and are looking for basic seat cover options, then purchasing from the manufacturer is always a safe bet.
How much does a Madjax golf cart seat cost?
The seat covers from MadJax will cost you about $180.
How much does a lazy life seat cover cost?
The seat covers from Lazy Life will cost you around $189, they are super easy to install, and can even be customized to your liking.
What is Seat Covers Unlimited?
Seat Covers Unlimited is another big brand with a great deal of options to choose from when purchasing new seats for your custom golf cart.
What to do if playback doesn't begin?
If playback doesn't begin shortly, try restarting your device.
What is Pete's golf cart seat cover?
All of Pete’s Custom Golf Cart Seat Covers are made specifically for each rear flip seat based on make and model of your golf cart and based on the actual seat manufacture as are most other sellers or upholsters offering them. This allows for a great fit and a custom look once installed. No wrinkles, tight contoured fit every time.
Do golf carts have plastic trim?
This applies to the rear golf cart seat set as well, though you usually will not find the plastic trim pieces in place around the seat cushion base because the seat cushion is permanently fixed to it where as the front seat hinges to access the battery or engine areas.
