.jpg)
To begin with removing the body, we need to make that possible by removing some things first: Top - Remove each of the 4 bolts. The head is a Phillips head, and use a #2 Phillips screwdriver to hold them (preferably a short handle). Use a 7/16" socket to remove the lock nuts.
How do I remove the rear seat of my golf cart?
Remove the 9/16 bolts using the appropriate socket on the roof and take the top off. Remove the bolts on the front bracing on either side of the cart and lift them off. Loosen the bolts of the rear seat and take them off. This will help to get a gap between the front and rear seats that will make it easy to remove the rear seat as a single unit.
How do you fix a crack on a golf cart body?
1 Clean the crack on the golf cart body with mineral spirits 2 Dry, prime and lightly sand the surface 3 Glaze the surface using a product such as Bondo 4 Alternatively, if the crack is not on the gel coat but the cart body, you will have to paint it with a resin/hardener mix.
Is it easy to remove the body from an EZGO golf cart?
It is very simple to remove the body off of your EZGO golf cart if you know what to look for. This how to video will… | Golf cart bodies, Ezgo golf cart, Golf carts It is very simple to remove the body off of your EZGO golf cart if you know what to look for.
How do you remove body from a golf cart?
6:569:35EZGO TXT Body Removal | How to Remove Golf Cart Body | Episode 1YouTubeStart of suggested clipEnd of suggested clipI've got all four bolts out of the back what on each sides of bumpers are to pop rivets per side andMoreI've got all four bolts out of the back what on each sides of bumpers are to pop rivets per side and there's two in the bag will they still need to drill. Out.
How do you remove the rear bumper on a EZ GO TXT?
0:101:08Jake's E-Z-GO Medalist TXT Rear Bumper Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you want to remove the bumper bolts to remove the stock bumper once you have the stockMoreAnd then you want to remove the bumper bolts to remove the stock bumper once you have the stock bolts out of the rear bumper remove the rear bumper.
What is the difference between ezgo medalist and TXT?
Some of the differences between the EZGO RXV and TXT golf cart models are as below: The EZGO RXV models are more customizable than the TXT models....EZGO Freedom TXTEZGO Freedom RXVLength93 inches94.5 inchesHeight67.5 inches70 inchesWheelbase66 inches65.7 inchesFront wheel track34 inches35.5 inches9 more rows
What is an ezgo txt?
The TXT electric could be considered something of a flagship cart for EZGO, as it has become one of their most popular and acclaimed models. It starts out with a 48V DC drivetrain, one of the most powerful on the market. In this way, it compares very favorably to its sister gasoline mode examined above.
How do I remove my body from EZ GO TXT?
1:385:35How to Install an E-Z-GO TXT Body and Cowl - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow lift the floormat to expose the five rivets securing the body to the floorboard. And removeMoreNow lift the floormat to expose the five rivets securing the body to the floorboard. And remove those with a drill. Remove the six rivets on top securing the body and C hinge plates to the frame.
How do you remove the dash on a EZ Go golf cart?
1:107:33E-Z-GO TXT Dash Install.wmv - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's simply pushed back on the stock - pump out with clips. Pull it forward no tools required. YouMoreIt's simply pushed back on the stock - pump out with clips. Pull it forward no tools required. You may need a flathead screwdriver to pry it back if it's a new car or the dash is pretty new.
What year was EZGO txt made?
1996EZGO Medalist made in the years 1994 – 1995 will look like the golf cart pictured above. EZGO TXT made in the years 1996 – Present will look like the golf cart pictured above. EZGO RXV made in the years 2008 – Current will look like the golf cart pictured above.
What year did EZGO make txt?
19966. TXT (1996 to Present)
How do you tell if my EZGO is a txt?
Where your manufacturer's code is located generally tells you which EZGO model you have (i.e.: TXT, RXV, Marathon, etc.). On many of the newer EZ-GO's, they will have the words "TXT", "Freedom TXT", "RXV" or "Freedom RXV" listed on the side of your golf cart.
How much does a EZGO TXT weigh?
How Much Does an EZGO TXT Weigh? The average weight of an EZGO TXT with the batteries on board is about 813 lbs. The EZGO EX1 TXT Golf Cart is lighter than the EZGO 48V Electric TXT golf cart. It weighs 739 lbs, while the EZGO 48V Electric TXT golf cart weighs 943 lbs.
What engine is in a 2005 EZGO golf cart?
E-Z-GO gas powered golf cars feature the industry's only twin-cylinder, overhead cam engine. This 9hp power plant provides dependable, smooth, efficient operation.
How to remove a rear bag well?
The best method for removing them is to use a chisel and hammer. Remove the head of these, and a punch to remove the bodies. Remove all 4 of these lower rivets this way. Rear Bag well - There are two drive rivets to be punched out. These are located in each corner of the rear section of the bag well.
Where are the hinge plates on a car?
Seat Hinge Plates - After removing the seat from the car, you will notice the hinge plates that hold the seat on the car. Each one has two rivets that need to be drilled out with the same bit from earlier. There is also one rivet between each plate, right above the shift handle. Drill that out also.
How to remove Phillips head bolts?
There are two Phillips head bolts on each plate. Use a screwdriver and a 7/16" combination wrench to remove each one. You may need to soak them down with WD-40 for several hours first. If one breaks, you can get a replacement from your local dealer.
How to remove snap nut?
You can use a small, flat blade screwdriver to remove these. If they prove to be troublesome, you can use a pair of dikes to remove ONLY the snap nut. The name plate can now be removed, thereby exposing the two rivets beneath it. Drill those two rivets out with the same 3/16" drill bit.
How to restore a golf cart?
Steps. Apply some dish soap all over the golf cart and wash it using a hose fitted with a fine spray nozzle. Use a microfiber cloth to spread the dish-wash soap uniformly, both inside and outside the cart. Take some water in a bottle with a spraying mechanism and spray on the surface that has to be restored.
How to repair a crack in a golf cart?
You can try the following options to repair cracks on a plastic golf cart body. Drill through the crack in a V shape and put a plastic weld on the rear. Fix some plastic tape on the front side so that the weld doesn’t push through. Drill the crack at the end so that it doesn’t become bigger.
How to paint a dark cart?
Apply a thin coat of plastic primer spray paint on the surface to be painted. You might need an extra coat if you’re planning to give your dark colored cart a light color. In this case, give a drying time of about half an hour before you apply the second coat. Paint the cart using acrylic or plastic-fusion paint.
How to clean a golf cart with soap?
Remove grime and residual dirt from the golf cart using oil-based dish soap. Wash the soap off using cold water from a hose. Wipe the cart using a towel and let it dry completely.
What is a golf cart made of?
The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal. The 1993 model Club Car used an indestructible thermoplastic ...
Is the Taylormade M4 driver adjustable?
Is the TaylorMade M4 driver adjustable? Yes, the TaylorMade M4 driver is adjustable. It’s possible to have twelve different options for the loft, lie angle and face angle, including the standard...
