
- Step 1: Gather Supplies. The first step in this process is to make sure you have everything you need in place before starting the removal process. ...
- Step 2: Heat Up Sticker. ...
- Step 3: Peel Sticker. ...
- Step 4: Wipe With Grip Solvent. ...
- Step 5: Dry.
How do you remove tape from a golf club?
Heat the golf club you plan to remove the tape from with a heat gun. It should take approximately 10 minutes to heat the shaft. Focus the heat gun on the grip area of the shaft where the tape is located. Rub down the tape with mineral spirits. Peel the tape off of the shaft.
How do you remove glue from the shaft of a pen?
I spread the peanut butter on with my finger and rubbed it in for a second. Then I let it sit for about 2 minutes. I then rubbed it off with a paper towel and the glue was completely gone. I then took a lightly moist cloth and wiped the shaft.
Can you use peanut butter to clean a golf club?
Thought of using peanut butter on a golf club, just seems a bit odd...but I guess it works. [/quote] If you wish to lick the residue off the club, note that peanut butter is superior in taste to either Goo Gone or lighter fluid.
How do you know when to replace your golf clubs?
One of the most important components of a golf club is the grip. If your grips are worn out, then your scores will begin to suffer on the course due to the loss of control of your golf shots. Over the life of your clubs, you will need to replace the grips.

Can you use Goo Gone on golf clubs?
Yes, Goo Gone Original is safe to use on golf clubs, but it isn't safe on rubber so be careful around the handle.
How do you remove epoxy from golf clubs?
Apply heat evenly to the hosel for about a minute, using a heat gun or heat torch. This will break down the epoxy that bonds the shaft to the hosel and make removal easier. If you are working with graphite shafts, use a heat gun, not a torch. Wear goggles and protective gloves.
Should you take stickers off golf clubs?
Should you remove stickers from golf clubs? This is a matter of choice as the removal will not affect the functionality of the clubs in any way. If you plan to resell them in the future, then leaving the stickers on may help to identify them faster during the resale process.
Can you use acetone on graphite shafts?
Wipe the shaft with acetone after you have removed the tape. This will help further clean the shaft, as well as remove the mineral spirit residue.
Does Goo Gone work on epoxy?
Goo Gone can remove residue from most types of tape, glue, and other adhesives, although it does not work on most permanent or epoxy glues.
How do you clean an epoxy golf shaft?
1:255:14Golf Club Repair - Part 1 - Removing a shaft & cleaning the hosel - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut in this case with the composite head and a graphite shaft you have to be really careful. So I'mMoreBut in this case with the composite head and a graphite shaft you have to be really careful. So I'm going to use a black & decker heat gun.
How do you remove sticky residue from a putter?
I used Adams Natural Creamy Peanut Butter. I spread the peanut butter on with my finger and rubbed it in for a second. Then I let it sit for about 2 minutes. I then rubbed it off with a paper towel and the glue was completely gone.
What is in golf grip solvent?
Water and Soap The cheapest and most convenient homemade solvent is water. Water-based grip tape has a glue-like substance that is activated by water. Before you spray the tape, add a small amount of detergent, which provides lubrication. Water offers many advantages -- nonflammable, odorless and safe for your skin.
How do you remove old tape from regripping golf clubs?
0:132:20Removing a Grip - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut the blade on top of the shaft. And then simply push away from you we're not digging down we'reMorePut the blade on top of the shaft. And then simply push away from you we're not digging down we're simply keeping it parallel to the top of the shaft. I like to cut it twice.
Can you use Goo Gone on graphite?
Yesterday I was taking multiple stubborn stickers off a Fuji shaft and put a little Goo Gone on a cloth to take away the rest of the residue and what happened was it stripped all the black paint off that part of the shaft. I used this before a numerous graphite shafts and never has any issues.
Can you use soapy water for golf grips?
Push the grip onto the shaft and adjust it to your liking. The WD-40 will dry within two to three hours and the tape will become sticky again. If you get some on the outside of the grip wash it off with warm soapy water so it does not damage the grip or make it feel oily.
How do you clean graphite golf clubs?
0:241:53How to Clean and Store Your Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your first Club. And dunk the head in the bucket of water for a few seconds remove. It and wipeMoreTake your first Club. And dunk the head in the bucket of water for a few seconds remove. It and wipe it off with the towel. Make sure all the debris has been removed from the grooves cleaning.
How do you remove old grip tape from a graphite shaft?
How to Remove Tape From Graphite Shafts Heat the golf club you plan to remove the tape from with a heat gun. Rub down the tape with mineral spirits. Wipe the shaft with acetone after you have removed the tape. Repeat the process for each graphite golf shaft requiring tape removal.
Can I Regrip my own clubs?
Once you’ve selected the golf grip you prefer, it’s time to proceed. To regrip golf clubs is a simple, straightforward process. Once you’re familiar with the process, it’s possible to regrip golf clubs in a matter of minutes. You may want to entrust the task to your golf pro.
How can I Regrip my golf clubs without a solvent?
Paint Thinner / Mineral Spirits Paint thinner or Mineral Spirits are cheap alternatives to grip solvent and also dry quickly. Like grip solvent, the mineral spirits will lubricate double-sided tape allowing you to work the grip over the shaft so that it adheres.
How do you remove glue from a golf club shaft?
The first step in removing a sticker from a golf club is to heat the sticker. If you don’t heat the sticker, the glue will not release enough. By heating the sticker, you can get the glue on the label to start to loosen and make it much easier to peel. You do not need to use high heat when heating the club.
What can I use as grip solvent?
Mineral spirits, denatured alcohol, acetone, nail polish remover or charcoal lighter fluid, all provide adequate deactivation of grip tape to install new grips. They also evaporate relatively quickly to allow the grip tape to bond to the grip in a relatively short amount of time, often less than an hour.
Can you reuse golf grip tape?
One option is to leave the existing tape on your clubs and reuse it. This is possible, but it’s probably the least desirable of the three options. After all, it’s likely the tape won’t form as strong a bond with the grip as it did the first time around. Option two is to place new grip tape on top of existing tape.
How do you use the V groove grip remover?
Simply fold back the lip on the grip and slide the tool underneath. Pour a bit of solvent in the groove as you work up and around the grip. A little bit of patience will go along way as you let the solvent do its work.
Headhammer
I regripped some ladies Taylor Made graphite shafts this weekend that had used glue to affix the grip to the clubs. I didn't want to use a blade on the shafts so I just rubbed it with my thumb really hard to get it off giving myself a nice size blister. So what's your secret for removing glue from graphite shafts?
dbdors
I have seen where TM uses a very thin double sided tape. It may look like glue since its a bit opaque. But heat to remove and wipe down with mineral spirits to get the residue off.
perseveringgolfer
Driver Awaiting NEW Driver (after 10 yrs) 4 Wood Callaway Big Bertha Steelhead plus 4+ Callaway shaft in 'Firm' flex
10shot
GolfWorks sells an epoxy cleaner in liquid and wipes, it works well. I keep it around for this type of application.
McGolf
Acetone, nail polish remover, the golf works wipes. will do the job but why glue a grip?
How to remove tape from golf club?
It should take approximately 10 minutes to heat the shaft. Focus the heat gun on the grip area of the shaft where the tape is located .
What is the most important component of a golf club?
By Jackson Lewis. One of the most important components of a golf club is the grip . If your grips are worn out, then your scores will begin to suffer on the course due to the loss of control of your golf shots.
Can you remove grip tape from graphite shafts?
If you choose to do the grip replacement yourself, a common problem that arises is removing the grip tape from graphite shafts during the replacement process. Unlike steel shafted clubs, graphite shafts can be damaged much easier during the tape removal process and require special attention.
