Required tools to remove golf cart clutch
- Clutch puller. It is absolutely impossible to remove the clutch without a clutch puller. ...
- Air gun. An air gun is required in the clutch removal process to unscrew the bolts. An air gun is basically a screwdriver powered with electricity or battery.
- Rubber hammer. A Rubber hammer is a small and inexpensive tool. It is a multi-purpose, must-have item for your toolbox and can be required in the procedure under discussion.
- Machine oil. Machine oil is not an essential component. However, if your cart’s clutch has not been removed or worked upon for a long time period, impurities like dust, ...
How to fix a golf cart clutch not engaging?
Fixing the battery will usually help you resolve the issue of your golf cart clutch not engaging. If you find that the issue does not lie with the battery, then you might have to remove the back cover and take a look at the system to figure out what the issue is. With the rear end jacked up, try throttling the cart.
How to remove a secondary clutch on a Yamaha golf cart?
There are some simple steps involved in removing the secondary clutch on a Yamaha golf cart. Just carefully follow the given steps: First of all, identify the right clutch puller according to the VIN number of the golf cart you are operating. Then use it to remove the drive belt very carefully from the primary and the secondary clutch.
How do you get a stuck clutch out of a car?
After a few days of trying to get the clutch free, if it still does not budge from its place, then use a crowbar for more leverage. Do not use too much rough force, but put the crowbar gently behind the clutch and apply pressure.
How to remove a clutch on an EZGO golf cart?
How to remove a secondary clutch on an EZGO golf cart. First of all, make sure that the golf cart is turned off, and the brake is in place. Make sure to put pressure on the gas pedal. Use a clutch puller to remove the drive belt. Loosen the central bolt using an air gun.
How do you remove the clutch on a EZ Go golf cart?
0:2214:32HOW TO REMOVE AN EZGO GOLF CART WISCONSIN ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it on its head. And i'll just take a chisel. And a sledgehammer.MorePut it on its head. And i'll just take a chisel. And a sledgehammer.
Can you adjust a golf cart clutch?
If you are unsure about removing the drive belt or the clutch, then you can adjust it. Just take out the belt and wound it again with the secondary clutch according to the requirements, and your problem should be fixed.
Why is my golf cart clutch not engaging?
The battery might be the key reason for the clutch not engaging. If the battery is faulty, the clutch systems will fail to generate enough power and will not function. If this is the case, it is advisable to replace or fix the battery and the issue should be resolved.
How does a secondary clutch work on a golf cart?
At rest, the drive clutch faces (sheaves) are separated by the wide drive belt. The driven (or secondary) clutch bolts onto the input shaft of the differential. The driven clutch sheaves are spring loaded together and the belt, at rest, rides up at the outer edge.
How do I know if my golf cart clutch is bad?
What Kinds of Problems Can a Golf Cart Clutch Have?A sudden inability to maintain even slow speeds when heading uphill or changing elevation.Slowing down to a crawl, then speeding up, then slowing again, seemingly without reason.Jolting during startup.A 'cranking' sound when starting up the golf cart.
How tight should a golf cart drive belt be?
The reason for a Club Car drive belt being too tight can be because the drive belt is too small for the golf cart. The way to check if the belt is fitted correctly is to push the belt down with one finger at the center between the clutches. It should not deflect more than 1.5inches.
Why would a centrifugal clutch not engage?
Centrifugal Clutch Won't Engage If your clutch won't engage, It usually means that the engine idle speed is different to the clutch idle speed. This can result in damage. To correct this, change the spring or change the engine speed to below the clutch idle speed.
How does a golf cart clutch system work?
0:463:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.
How do you fix a clutch on a club car?
Cleaning the clutch thoroughly might be the simplest solution to this problem. You could also try lubricating the system with a good quality lubricant. This might free up the clutch and thus prevent the squeaking noise. Another common reason could be due to the weights present inside the system hanging up.
What is a secondary clutch?
The secondary clutch is mounted to the input shaft of the transmission, transaxle, or the like. In modern CVT systems such as those used in recreational vehicles, the secondary clutch has two functions: as a “slave” to the primary clutch and to provide a torque sensing element.
What is a driven clutch?
The secondary clutch, or as some call it, the driven clutch, is mounted to the splined input shaft of the transmission and is connected to the primary clutch with a belt that wraps around both clutches.
How does centrifugal clutch work?
1:252:50How does a Centrifugal Clutch work? | Skill-Lync - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the mass of the shoes exert a centrifugal force. And they tend to move away from the center butMoreNow the mass of the shoes exert a centrifugal force. And they tend to move away from the center but the springs hold them in its position as the speed of the engine increases.
CVT Components
On a golf cart, the CVT is comprised of three parts; the drive clutch or primary clutch on the engine, the driven or secondary clutch on the differential, and the belt which connects the two. As the rpms of the engine increase, the drive clutch spins with it and with the use of flyweights and centrifugal force, the clutch pulls inward on the belt.
Drive Clutch
Let’s start with the removal of the drive (primary) clutch which is mounted on the crankshaft sticking out of the engine. Before beginning the golf cart clutch removal of either clutch, you must first remove the drive belt. At rest, it is loose enough where you can just work it over the clutches. Once removed, you can then remove the drive clutch.
Driven Clutch
As for the driven or secondary clutch, although it may seem easier to remove, it is often the hard one to tackle. When the bolt is removed from the center of the driven clutch, there is literally nothing else holding it on. It is not generally a tapered fit like is used on the drive clutch.
Why does my golf cart clutch slip?
There can be a problem with the drive belt, which can cause the clutch to slip. Sometimes the installed belt drive may not match the clutch in the golf cart, causing problems. Just replace it, and you are good to go. Check if the belt drive is misaligned. This is also a common problem with the clutch.
What is wrong with my golf cart clutch?
If there is any problem in how your golf cart runs, you can check for the following problems: There might be a problem with the belt. Check if the belt is too tight or loose.
What is a Project X HZRDUS shaft?
What is the Project X HZRDUS Black Fairway Wood shaft? Project X HZRDUS Black Fairway Wood shaft is a low spin golf shaft design. It comes with enhanced firmness over the entire length of the shaft....
How to get clutch out of clutch?
Do not use too much rough force, but put the crowbar gently behind the clutch and apply pressure. The clutch might slide out smoothly. It is important to increase your pressure evenly and gradually, or you can damage it more than before.
What to do if you have a problem with your G16 golf cart?
If there is any problem with the secondary clutch, it is best to replace it or the drive belt connected to it. If you are unsure about removing the drive belt or the clutch, then you can adjust it.
How to find primary clutch on golf cart?
There are two clutches in the golf cart. To locate the primary clutch, it is generally the lower one. Consult the cart’s manual to make sure. First, observe exactly how the drive belts have been adjusted to the clutches. After you have noted that.
What to do if clutch gets stuck?
If that is the case, then you will need to complete the following steps: If the clutch gets stuck in any instance, the first thing you should do is use a PB Blaster and add some of it to the clutch. Give it some time to soak.
Why is my golf cart jerky?
After a while, it could become smooth, but this problem is caused due to some issues with the clutch system.
Why won't my clutch engage in a cart?
This could be because the clutch is slipping from its designated position.
Why does my clutch make a squeaking noise?
Sometimes this issue of the clutch not fully engaging but slipping could be caused due to the dirt build-up inside .
How to stop a clutch from squeaking?
You could also try lubricating the system with a good quality lubricant. This might free up the clutch and thus prevent the squeaking noise.
How to stop clutch from coming apart?
Gently place the crowbar behind the clutch and apply pressure. The clutch might slide off and come apart. Make sure to add even pressure at the same intervals otherwise you might end up breaking a part. If none of these techniques work, you can try cutting some relief on the clutch.
How long does PBBlaster soak in?
The first thing you can try out is adding some PBBlaster to the clutch and let it soak in for some time. Add a generous quantity and let it sit for a couple of days.
What to do if clutch doesn't engage?
If the clutch still refuses to engage, you might have to get it checked by a service center. They will be able to identify the issue easily and help fix it.
