Using a flathead screwdriver or pliers, pry the ferrule from the shaft and discard it. Place the club in a vise to position it for shaft removal. The club should lie horizontally.
How do you remove a golf shaft from the head?
Removing a golf shaft from the head is fairly simple; however, it must be done carefully and properly. Remove the ferrule. The ferrule is the small plastic band that sits just above the hosel.
How to remove rust from iron shafts?
How to Remove Rust From Iron Shafts. 1 Step 1. Dampen a rag and rub the club shaft anywhere that rust has formed. The rag will remove loose, flaked rust to help you see how much rust is ... 2 Step 2. 3 Step 3. 4 From the Web.
Should you rub the steel shaft of your golf clubs?
If you rub the steel shaft of your clubs, they will scratch easily. Lee Elder broke down racial barriers throughout his career and paved the way for others. Toronto-based journalist William McCoy has been writing since 1997, specializing in topics such as sports, nutrition and health.
How do you remove a ferrule from a golf club?
Using a flathead screwdriver or pliers, pry the ferrule from the shaft and discard it. Place the club in a vise to position it for shaft removal. The club should lie horizontally. Make sure the vise grips the shaft securely to prevent it from slipping out. Expose the length of the head and about 8 inches of shaft. Heat the glue inside the hosel.
How do you remove shafts from an iron?
0:042:32How To Remove A Steel Golf Shaft From A Golf Club - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can also use a heat gun but it's going to take three times as long. The other things that you'reMoreYou can also use a heat gun but it's going to take three times as long. The other things that you're going to need or a club making vice vice clamp some heavy-duty gloves and probably a knife.
How do you take a shaft out of a golf club?
0:194:28How To Remove A Graphite Shaft From A Golf Club - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you needed a special tool called a graphite shaft puller you're several on the market. That areMoreSo you needed a special tool called a graphite shaft puller you're several on the market. That are commercially available but they do essentially the same thing they securely clamp the shaft.
How do you remove graphite shaft from iron?
One method to remove a graphite shaft is to remove the ferrule, cut the shaft off at the hosel and drill the remaining part out of the hosel. However, on modern drivers, fairways and hybrids which are nearly all hollow inside, could potentially could push material into the cavity of the head and cause it to rattle.
How do I remove a golf shaft adapter without a puller?
1:594:14Simple Taylor Made shaft adapter removal 30 sec without shaft pullerYouTubeStart of suggested clipEnd of suggested clipAll right take the head on see that moves really easy and so you just keep kind of twisting. AndMoreAll right take the head on see that moves really easy and so you just keep kind of twisting. And pulling keep the head locked in and eventually it will come all the way. Off.
How do you change the shaft on an iron?
HOW TO RESHAFT GOLF CLUBSSteel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. ... Measure the shaft tip. ... After the tip has been trimmed, abrade or roughen the shaft tip. ... Align the shaft graphics the way you want them by rotating the shaft.More items...
How do you remove graphite shaft without a puller?
0:556:40pulling a graphite shaft 2016 - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow can you use a propane torch and the big monster. Yeah you can particularly if you're using steelMoreNow can you use a propane torch and the big monster. Yeah you can particularly if you're using steel on steel I don't see anything wrong with it it's just a much bigger. Application of the heat.
How do you use a shaft puller?
0:163:50How To - Pull a graphite golf shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for me I've got my shaft puller here. I've got the shaft that needs to have the tip removed. IMoreSo for me I've got my shaft puller here. I've got the shaft that needs to have the tip removed. I have a micro torch butane micro torch it burns really fast and you can isolate the heat which is why
Can you reuse graphite golf shaft?
Along the lines of what fupresti said, as long as they're pulled properly you should be able to reuse a graphite shaft indefinitely. The only way a graphite shaft will become unusable aside from some freak accidents is by human error in part of the build or an out of control temper on the course.
How do you pull a shaft adapter?
0:139:32How to Remove Golf Shaft Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you start to see it's a bubble up a little bit just take your hook blade. Slide it right underMoreOnce you start to see it's a bubble up a little bit just take your hook blade. Slide it right under there. And it should come off free easy a little cold out here in the shop tonight.
How do you remove a TaylorMade shaft?
0:253:04How to Remove a Driver Adaptor from a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipTool TaylorMade wrench will work the same. But anyways just loosen that up. And the club head comesMoreTool TaylorMade wrench will work the same. But anyways just loosen that up. And the club head comes right off. Now what we're trying to do here is get this piece right here and take it off.
Can you take an adapter off a golf shaft?
8:0217:13How To remove / Install a Golf shaft Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell you'll have to take that plastic piece off. And that's assuming that there is a plastic pieceMoreWell you'll have to take that plastic piece off. And that's assuming that there is a plastic piece on the on the adapter. Sometimes there's not just like we've talking. Taking talking talked about
Can you reuse a shaft adapter?
One would be to reuse the existing adapter and the other is purchasing a new adapter sleeve and starting fresh. There are good reasons for either choice. If you do decide on using the original OEM adapter, then that will save money.
Can you reuse golf shafts?
Along the lines of what fupresti said, as long as they're pulled properly you should be able to reuse a graphite shaft indefinitely. The only way a graphite shaft will become unusable aside from some freak accidents is by human error in part of the build or an out of control temper on the course.
How do you pull a graphite golf shaft?
0:053:50How To - Pull a graphite golf shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain using a butane torch you can actually really focus the heat which is a lot better than sayMoreAgain using a butane torch you can actually really focus the heat which is a lot better than say trying to use a heat gun which could end up damaging. The fibers of the golf shaft.
How much does it cost to Reshaft a golf club?
Reshafting a golf club will cost you $50 to $250. This price depends on the type of shaft you choose, the labor charges, and the other fees charged by the repair company. The cost of reshafting includes the cost of the shaft, the labor charges, and some additional costs pile up.
How do you change golf shaft tips?
4:0411:19How to remove and install an golf club shaft adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you think about it's really nothing more than a set screw with a washer. And it's and itMoreWhen you think about it's really nothing more than a set screw with a washer. And it's and it threads itself all the way in there so it gets a very very large bite.
How to melt glue on a golf club?
Heat the glue inside the hosel. The hosel is the area where the shaft fits into the clubhead. Light your propane torch and apply heat to the underside of the hosel. This will melt the glue.
How to remove a ferrule from a hosel?
The ferrule is the small plastic band that sits just above the hosel. With a utility knife or box cutter, cut a vertical slit in the ferrule. Using a flathead screwdriver or pliers, pry the ferrule from the shaft and discard it.
Do you need to reshaft a golf club?
The need to reshaft golf clubs is common. It is sometimes necessary to have a professional tackle a complete reshaft job; however, it can make his job easier if you eliminate a step in the process. Removing a golf shaft from the head is fairly simple; however, it must be done carefully and properly.
How to clean epoxy from hosel?
Clean out any remaining epoxy in the hosel. Begin using a file and scrape away the residue, then apply a solvent to a small rag and wipe down the interior of the hosel. You may want to push the rag in with the tip of a screwdriver or similar tool.
Do you need a new shaft for golf?
Almost every golfer will need a new shaft at some point during his golfing career. Clubs can be reshafted at most golf stores and country clubs, but if you are a do-it-yourself type, removing and/or installing a new shaft is a straightforward project that will save you money.
Step 1
Put on protective gloves and keep them on until the procedure is complete.
Step 2
Heat the hosel (small metal joint linking the shaft to the club head) with a heating gun. Be sure to dispense heat evenly on all sides of the hosel and don't be alarmed if small amounts of white smoke begin to escape the hosel cavity. That is just the old epoxy melting.
Step 3
Place the grip end of the club on the ground so the head end is sticking straight up and gently pull the head off the shaft. Do not twist, especially if you want to reuse the shaft or sell it, as twisting may harm the inner walls of the hosel as well as the tip of the shaft.
Step 4
Allow the club head to cool completely once its been liberated from the shaft.
Step 5
Roll up a small piece of sandpaper and use it to clean out any remaining epoxy residue inside the hosel joint, making it ready for the insertion of a new shaft.
Series Navigation
In this video, I show you how to remove the putter head from the shaft. I use a propane torch, but a heat gun would suffice too. This technique can be used for irons, wedges, etc.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
What to do if your golf club shaft is bent?
If the shaft of your golf club is bent or broken, do not discard the entire club. Instead, remove the clubhead from the damaged shaft and install it on a new one. Disconnecting the golf club shaft from the head also allows you to try the latest shaft technology on the market without purchasing a whole new club.
How to remove ferrule from golf club?
Step 1. Use a utility knife to scrape off the ferrule at the connection point between the shaft and the clubhead. Scrape down toward the head and away from your body.
How to remove rust from golf club shaft?
Step 1. Dampen a rag and rub the club shaft anywhere that rust has formed. The rag will remove loose, flaked rust to help you see how much rust is sticking to the shaft.
What does it mean when a golf club shaft rusts?
When a golf club's iron shaft develops rust, this issue doesn't mean the club is no longer worth keeping. It does mean, however, that the problem requires your immediate attention. Because rust spreads over time, address the situation quickly to restore the club to its original appearance. If your clubs are rusting frequently, examine how you use ...
