Can I upgrade the hub caps on my golf cart?
If your tires are already in great condition, upgrading the hub caps will give your golf cart a new look with minimal investment. We stock a variety of hub caps and related accessories in the most popular styles and colors. Select from chrome or black lug nuts and center caps.
How do you remove a flywheel from a Yamaha G1?
Yamaha G1 flywheel removal. The G1 from Yamaha can be removed via the following steps: Use a bit of penetrating oil and wait for some time. Apply a bit of medium level of heat. Mark the timing plate once done. After the crank seal is changed, it can be reinstalled at the correct time.
How do I remove the flywheel of an EZGO?
The flywheel of an EZGO, be it the Workhorse or Medalist can be removed by following these steps: Find out the two dome head screws in the flywheel which seems they are there for no particular reason.
How do you take the wheels off a Yamaha golf cart?
0:501:47How To Take Off Remove A Golf Cart Wheel - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can just slide it right. Off. All right so once you have the wheel jacked up i i don't do itMoreYou can just slide it right. Off. All right so once you have the wheel jacked up i i don't do it much more than two inches at most it's just not necessary. Um you just loosen up the bolts.
How do you get wheel caps off?
0:461:45How To Remove Wheel Center Caps The Easiest Way! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you take your suction cup and push it up against there lock it into place and then it's gotMoreAnd then you take your suction cup and push it up against there lock it into place and then it's got this base already on here that you can use as a handle. And then you just pull it boom.
How do you change a tire on a Yamaha golf cart?
0:291:53Replacing Golf Cart Tire - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just make sure that you don't jack up your jack just yet you want the pressure on the tire soMoreAnd just make sure that you don't jack up your jack just yet you want the pressure on the tire so that you can remove the nuts without the tire moving we've removed the nuts.
How do you remove lug nuts from a golf cart?
0:181:44Removing Golf Cart Wheels & Tires (EZ Go, Club Car, Yamaha)YouTubeStart of suggested clipEnd of suggested clipBe sure to loosen the lug nuts slightly before lifting the cart. First you're going to take aMoreBe sure to loosen the lug nuts slightly before lifting the cart. First you're going to take a flathead screwdriver. And pry under this look to go ahead and remove the club car.
How do I change a hubcap?
Replacing this type of hubcap is also easy, as you only have to unscrew each plastic nut to remove the hub cap. Again, protect yourself by parking your car on a flat surface, engaging the parking brake, and chocking the wheels. After you have removed the plastic components, simply put the new hubcap into place.
How do you remove center caps without taking wheels off?
0:413:27EASIEST Way To Remove Center Caps - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make sure it sticks. Then once it's on just pull straight you know what a poor suicide wanna goMoreAnd make sure it sticks. Then once it's on just pull straight you know what a poor suicide wanna go pull straight. Back. Just like that that came up so easy just going you want to take it.
How do you jack up a Yamaha golf cart?
0:321:54How To Lift Your Golf Cart Onto Jack Stands | RZ Carts - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go aheadMoreOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go ahead and lower it slowly out of the jack stand making sure nothing shifts are at this process.
Can you change golf cart tires yourself?
Instructions to Replace Golf Cart Tires Remove the lug nuts using the proper socket size. Pull the wheel off of the lug studs. Use the valve stem tool (as per package instructions) to remove the valve from the tire stem. Lay the wheel down on pavement and push the tire down as close to the rim as you can get.
How do you fix a flat tire on a golf cart?
1:054:12How we fix our flat golf cart tires using the TiteSeal fix in a can productYouTubeStart of suggested clipEnd of suggested clipSo put your valve cap somewhere near the top above the nine o'clock. And three o'clock positionMoreSo put your valve cap somewhere near the top above the nine o'clock. And three o'clock position preferably close to the six o'clock. And then turn this onto the wheel.
What size are Yamaha Golf Cart lug nuts?
Yamaha Golf Cart Lug Nuts - 12mm x 1.25.
How do you remove bolts from hubcaps?
Pry around the rim of the old hubcap with a screwdriver to loosen it. Use a flat-head screwdriver and lightly pull at certain spots until you feel the cap wiggle loose. If something feels like it will break or snap, stop and move to another spot. You may have to loosen a few areas to get it off.
Do Yamaha golf carts use metric lug nuts?
0:201:11Golf Cart Lug Nut Sizes for EZGO, Yamaha, Club Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you own a yamaha or a star golf cart your cart uses metric sized lug nuts most carts use one ofMoreIf you own a yamaha or a star golf cart your cart uses metric sized lug nuts most carts use one of these two sizes.
How to remove a Yamaha G1 flywheel?
The G1 from Yamaha can be removed via the following steps: Use a bit of penetrating oil and wait for some time. Apply a bit of medium level of heat. Mark the timing plate once done.
What size flywheel is used on a Yamaha G16?
There are various puller sizes that accompany golf carts. The most common is a Flywheel 3 jaw puller that comes in various sizes from 6 inches to 9 inches. Sometimes the center shaft can be drilled or tapped and sometimes it may not be either.
How to remove flywheel on EZGO?
The flywheel of an EZGO, be it the Workhorse or Medalist can be removed by following these steps: Find out the two dome head screws in the flywheel which seems they are there for no particular reason. Remove the two screws and you would find two holes to connect a puller. Protect the end of the crankshaft from the puller.
How to check if a flywheel is off?
You can do so by following the below steps: Use penetrating oil and wait for some while. Then check if the flywheel gets off. Another option would be to use a bit of heat to check if the flywheel comes off. Set a mark on the timing plate . After the crank seal is removed, it can be reinstalled at the correct time.
How to keep woodruff key in position?
Make sure the end of the crankshaft stays apart from the puller. The woodruff key should be kept in position during the exercise. Check the oil tank, be mindful to get any obstacles removed during the process. Make sure that the fins of the fan are not damaged while the removal is taken place.
How to protect crankshaft from puller?
Be mindful that the woodruff key is kept in position during the exercise. If there is any material struck in the oil tank , be mindful to get it removed during the process.
Can you reinstall a crank seal after changing it?
After the crank seal is changed, it can be reinstalled at the correct time. The bolt can be also hit with a hammer to check if the flywheel comes off. You can also apply few extra hits if it does not remove in one go. Remove the plastic cooling fins before heat is applied.
