Most standard castle nuts are held in place by cotter pins, which can rust and seize to the bolt. If you have rusted cotter pins, they will be difficult to remove. Instead, apply penetrating oil and give it a few minutes to soak in.
Full Answer
How do you remove a castle nut from a wheel?
First remove the cotter pin in the centre of the castle nut. Next make use of a fifteen-sixteenth wrench and pry out your castle nut just so that it is loosened, not entirely out in your hand. Use a 3/4 th wrench to break out your lug nuts and then use a carjack to hold up the wheel.
What is a castle nut on a golf cart?
The castle nuts serve as a locking device. The castle nut is on a golf cart is very important for the final assembly are used to tie rods and on Ball joints. Castle nuts should be oiled regularly to maintain better functionality of the golf cart.
How to remove castle nut on EZGO golf cart?
How to remove castle nut on EZGO golf cart 1 Using a wrench is a great option to remove the castle nut. 2 If the castle nut is jammed, use a cutting machine to cut the nut and free the part. 3 A pickle fork is equally useful, and with the ball joint it will remove the castle nut.
How far apart are the nuts on a golf cart?
All the standard golf carts like EZGO, Club Car and Yamaha are equipped with 4X4 nuts that are 4 inches by 4 inches, set to be 100 mm apart. Always use the alloy bolts which are very durable and safe to use. Don’t use the old bolts as they might not be strong enough to hold the required portion.
How do you remove lug nuts from a golf cart?
0:181:44Removing Golf Cart Wheels & Tires (EZ Go, Club Car, Yamaha)YouTubeStart of suggested clipEnd of suggested clipBe sure to loosen the lug nuts slightly before lifting the cart. First you're going to take aMoreBe sure to loosen the lug nuts slightly before lifting the cart. First you're going to take a flathead screwdriver. And pry under this look to go ahead and remove the club car.
What size are the lug nuts on a club car golf cart?
1/2-20 Size16 Pack of Chrome Lug Nuts Standard 1/2-20 Size for Club Car & EZGO Golf Carts. Be the first to write a review.
What size are the lug nut on a EZ go golf cart?
What is the EZGO TXT lug nut size? The standard lug nut size on a EZGO TXT is 1/2″ – 20.
Are ezgo lug nuts standard or metric?
0:001:11Golf Cart Lug Nut Sizes for EZGO, Yamaha, Club Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you have any american-made golf cart such as an easy go or a club car your cart uses standardMoreIf you have any american-made golf cart such as an easy go or a club car your cart uses standard size lug nuts.
What size socket fits a golf cart lug nuts?
Deep Socket Lugs Standard 1/2"
Are all golf cart wheel bolt patterns the same?
Whether you own a Club Car, Columbia, E-Z-GO, Harley Davidson, Par Car, Star EV, or Yamaha golf cart, they all have standard bolt patterns for the wheels they roll on. Unlike cars or trucks it is quite easy to pick out a wheel or rim that will fit your golf cart.
What is the bolt pattern on a golf cart?
4x4The golf cart wheels sold on this site all have a bolt pattern of 4x4 (4 inches by 4 inches, or 101.6mm apart). This is standard on all golf carts (Yamaha, Club Car, EZGO, Par Car, STAR EV, Harley Davidson, etc.).
What size are Yamaha Golf Cart lug nuts?
Yamaha Golf Cart Lug Nuts - 12mm x 1.25.
Do Yamaha golf carts use metric lug nuts?
16 Chrome Lug Nuts (Metric Threads 12mm-1.25, OD 3/4″) Fits ALL Yamaha Golf Carts ( Or any other cart with Metric Threads)
Why do my tire lug nuts keep coming loose?
Over-tightening (excessive preload) can damage the bearing causing overheating, seal failure and lubricant loss. Where fasteners are to blame, several factors can cause nuts to work loose. Excess paint, rust, scale or dirt between mating areas of wheel end components will lead to low clamping force.
How to remove a castle nut?
First remove the cotter pin in the centre of the castle nut. Next make use of a fifteen-sixteenth wrench and pry out your castle nut just so that it is loosened, not entirely out in your hand. Use a 3/4 th wrench to break out your lug nuts and then use a carjack to hold up the wheel.
How to remove a stuck golf cart brake drum?
To remove a stuck EZGO Golf Cart brake drum, you can take a look at the following steps: First spray it with a good quality cleaner but make sure it doesn’t penetrate the inside of the hub. Remove the cotter pin and the castle nut. Now it’s time to back the brake lining off with the aid of an adjuster.
How to remove a drum on a Yamaha golf cart?
How to remove a stuck Yamaha golf cart brake drum? The safest way is to use a three-prong pulley puller to remove a stuck brake drum of a Yamaha golf cart. You can attach it around the perimeter of the hub and keep tighten the central bolt.
Why does my golf cart have a brake drum?
The main reason the brake drum gets stuck on a golf cart is because of rust forming, and general wear and tear. The brake drum can get rusted on the cart, in which case it will be almost impossible to get it out. It is better to keep a lookout for such possibilities. A ridge can form over the outer portion of the rotor due to continuous start ...
How to remove a rubber grommet from a braking system?
Remove the rubber Grommet from the rear end of the braking assembly. Using a screwdriver, push into the hole of the automatic adjuster to unlock it. Next insert a second screwdriver to rotate the lock wheel. Then safely open the drum.
What to keep in case of a fire from a acetylene torch?
Safety glasses. Apart from the above list, you must also keep some water and a fire extinguisher handy in case there is a fire from the acetylene torch set. Remember to work on the brakes sometime after you have ridden the cart since the wheels and the drums will be insanely hot from friction in case there is a brake drum problem.