Golf-FAQ.com

how to remove surface rust from golf clubs

by Cathrine Wintheiser Jr. Published 3 years ago Updated 2 years ago
image

How to Remove Rust from a Golf Club.

  • Use Vinegar. Go to the kitchen, and chances are, you will find a bottle of vinegar. This is one of the most accessible and effective materials that ...
  • Try Baking Soda.
  • Scrub with Lemon Juice.
  • Remove Using a Chemical Solution.

Part of a video titled Golf Information : Removing Rust From Golf Clubs - YouTube
0:21
2:15
It's very clean. But if you take a piece of steel wool. And just lightly brush it right along theMoreIt's very clean. But if you take a piece of steel wool. And just lightly brush it right along the edges it'll get rid of all of this rust as you can see it's shining up rather nicely.

Full Answer

How to remove rust and restore golf clubs?

Apr 14, 2022 · How to Remove Rust from a Golf Club Use Vinegar. Go to the kitchen, and chances are, you will find a bottle of vinegar. This is one of the most accessible... Try Baking Soda. As with removing paint from a golf club [how to remove paint from a golf club], you can also use baking... Scrub with Lemon ...

How do you remove rust from a golf club?

Removing Rust From Golf Clubs Step 1: Things You'll Need. Plenty of elbow grease! Step 2: Vinegar, Steel Wool & Sandpaper. To get started I put enough white vinegar in my bucket to just cover the head... Step 3: Cleaning the Face of the Club. It looked as though these clubs had been put away dirty, ...

How often should you clean your golf clubs?

Remove Rust Option 1 To begin, you will need a bucket of warm water and washing up liquid. Be sure that the water is not too hot as this may do more harm than good. Pop the clubs into the mixture and leave them for around five minutes.

How to clean golf clubs so they shine like New?

Instructions Step 1 Fill a bucket with warm (not hot) water mixed with dish washing liquid or liquid soap. Soak the clubs for five minutes or so and then wipe them with a cloth. If the rust is purely on the surface, this may be sufficient to remove it and will not cause any damage to your clubs. Step 2

image

Step 2: Vinegar, Steel Wool & Sandpaper

To get started I put enough white vinegar in my bucket to just cover the head of the club and splashed it up over the rest of the shaft using my hand, I probably could have used a cloth but this worked fine! It was a bit messy though, so I definitely suggest doing this outside (particularly if your significant other is opposed to the house smelling like vinegar!)..

Step 3: Cleaning the Face of the Club

It looked as though these clubs had been put away dirty, and I definitely wanted to make sure that I got into all the groves on the face of the club. This is where the toothbrush comes in handy, just dip it in the vinegar and brush away!

Step 4: Before & After

It took around an hour of scrubbing the entire set to get to this point, and personally I think they look great.

Step 5: Don't Forget the Handle!

While I was at it I thought I'd give the handle a good scrub too and for this I swapped out the vinegar for a mixture of warm water with a bit of dish washing liquid, a bit of a scrub with the toothbrush and they were as good as new!

Step 6: Rinse & Dry

At this point all of the clubs had been scrubbed with vinegar and soapy water, I wanted to ensure that there was no residue of either hanging about, so I gave them all a good hose and hand dried each club thoroughly.

Step 7: Polish & Buff

Having a tool like a Dremel will make this step a lot easier, but it's not really necessary - I hand polished each of the shafts using an all purpose metal polish and a ran, and used the Dremel with a buffer bit on the heads of each club.\

Step by Step guide on how to clean rust off golf clubs

Before starting, you’ll need to remove all chrome and finish off the shaft of each club. Remove the grips and clean them with a dry cloth. You may also want to do this if it helps you identify potential problems with your clubs on the course, but it’s not necessary.

Final thoughts on how to clean rust off golf clubs

Your clubs will last longer if you clean them after every use. You can use our article on the best way to clean your golf clubs at home.

Frequently asked questions related to how to clean rust off golf clubs

Most people understand that steel rusts, but they don’t have an idea of why clubs golf rust.

Instructions

Fill a bucket with warm (not hot) water mixed with dish washing liquid or liquid soap. Soak the clubs for 5 minutes or so and then wipe them with a cloth. If the rust is purely on the surface, this may be sufficient to remove it and will not cause any damage to your clubs.

Tips & Warnings

If all the above steps fail to remove the rust, take the clubs to your professional or to a specialist golf store and ask them to assess the damage. It may be that you will need to get badly affected clubs repaired or replaced. If the rust has gone too deep, there may be nothing that can be done.

How to keep golf clubs from rusting?

Clean off the mud and dry off the moisture. If you’ve been caught in some particularly heavy rain, it’s a good idea to remove all your clubs from your bag and let everything dry separately. Always store your clubs in a cool, dry place. Humidity is a one-way ticket to rusty clubs, so avoid anywhere that gets too hot.

How to clean rusty golf clubs?

For most rusty golf clubs, a simple mixture of soap and warm ( not too hot) water will offer a simple solution that comes at no further risk to your clubs. Fill a bucket with warm water, and add either some dish soap or liquid soap. Then, soak your clubs for five minutes or so. Finally, grab a cloth and wipe away the rust.

Where to store golf clubs?

Basements and garages are usually the best places to store golf clubs. Never leave them in the trunk of your car. Throughout the off-season or any period of time when you are not frequently playing, periodically check the condition of your clubs. If they’re damp, dry them off and move them to a new location.

Who is Nick Lomas?

Nick Lomas is the founder of GolfSpan, an avid golfer, not quite a pro but has over 15-years of experience playing and coaching golfers from all over the world. His mission is to bring the golfing community a better experience then it comes to choosing the right golf gear, and finding the right set up for your game.

Can you use cola to remove rust from golf clubs?

That’s right – you can use America’s favorite soft drink to remove rust from your golf clubs. More of a Pepsi person? No problem . Any sort of cola will work (as long as it contains phosphoric acid).

Step 1

Use preventive measures first to try to keep rust from forming on your clubs. Golf pro Mark Crossfield recommends wiping your clubs down after every round, wiping them with a multipurpose lubricant every few months, and never storing them in a humid location. Ganley notes that a garage, in particular, isn’t a good place to store golf clubs.

Step 2

Spray rust remover on metal club heads and shafts. The Rust Removal website notes that rust removers not only eliminate rust from your clubs but also can prevent rust as well.

Step 3

Rub the remaining rusty areas lightly with steel wool, according to Ganley and the Rust Removal site.

How to clean rust off golf clubs?

A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.

What is pitting corrosion?

Pitting Corrosion. Often, surface rust can lead to further corrosion. The most damaging is called pitting corrosion. This is localized corrosion that results in holes or divets in the metal surface. While it is possible to remove the rust from the surface of these divets, it is very difficult to repair them.

Can you use industrial rust remover on plastic?

If none of the other solutions, you can go to a hardware or auto parts store and purchase industrial rust remover. This is a harsh chemical that can damage club finishes, plastics, and other materials. Be sure to only get the rust remover on the surface you want to clean. Also, follow the instructions specified by the specific product you use.

Can steel wool be used on golf clubs?

Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.

Can you put wax on a golf club?

This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.

Does Coca Cola rust?

Coca-Cola has the ability to dissolve rust, but can also damage the club if left exposed for long periods of time. It is best to soak the club in Coca-Cola for only a few minutes at a time. Again, use a small brush to scrape clean the rust.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9