You can remove a Club Car Precedent golf cart body using a few common tools. Remove the bolts of the front bumper using the T-25 bit and take the bumper off. Lift the front body upwards and take it off. Remove the forward-reverse switch on the rear body using the same bit.
How to align club car golf cart front end?
How to align Club Car golf cart front end? The best way of aligning the Club Car front end is to first adjust the placement of the camber, followed by the alignment of the wheel and tire, by toeing them in or out as per required. Position the straight and leveled edge of the camber on the ground.
How do I remove the rear seat of my golf cart?
Remove the 9/16 bolts using the appropriate socket on the roof and take the top off. Remove the bolts on the front bracing on either side of the cart and lift them off. Loosen the bolts of the rear seat and take them off. This will help to get a gap between the front and rear seats that will make it easy to remove the rear seat as a single unit.
How do you raise the front end of a club car?
Activate the parking brakes and raise the front end of the Club Car. Unfasten the bolt in the interior of the bottom wheel joint and measure the tire’s placement. If the head of the tire is nearer to the structure than the base, then move the base of the tire to the core of the cart’s structure.
What parts do you need to lift a golf cart?
You can forgo the fabricated lift kit and instead opt to create your own. Some of the crucial parts you are going to need to include longer shocks, springs, axles, and A-arms. A support plate may also be necessary, at least for most golf carts.
How do you change the leaf spring bushings on a Club Car Precedent?
0:385:09Club Car Precedent Heavy Duty Leaf Springs | How to Install on Golf Cart ...YouTubeStart of suggested clipEnd of suggested clipSo just going to put this Park together first with sleeve inside the bushing tied it in one side andMoreSo just going to put this Park together first with sleeve inside the bushing tied it in one side and slide the bushing into the other.
How do you remove a body from a Club Car Precedent?
1:2513:38How to Remove & Install Club Car Precedent Golf Cart Body - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's going to be a couple of screws that we need to remove i believe there's four in total and weMoreThere's going to be a couple of screws that we need to remove i believe there's four in total and we're going to use a t25 to remove. Those. Once you have these removed the brow should come off.
How do you install front leaf spring on Club Car DS?
1:447:59How To Replace Front Leaf Spring on Golf Cart - Club Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're gonna have to get ourselves a metal punch. And put it on the end of the bolt. So we canMoreSo we're gonna have to get ourselves a metal punch. And put it on the end of the bolt. So we can continue pushing that through all right i got a metal punch you could use a screwdriver.
How do you change the arm on a Club Car Precedent?
0:2614:33A-Arm Lift Kit for Club Car® Precedent® | How to Install Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe need to remove our front bumper you also notice for video purposes we remove the front cowl. We'MoreWe need to remove our front bumper you also notice for video purposes we remove the front cowl. We're gonna take a 13/16 socket and remove and retain the front hub and nut on the spindles.
How do you remove a golf cart body?
0:538:59Yamaha Drive G29 Golf Cart - Body Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou do have to remove the top or top supports. To be able to remove the front or rear body sectionMoreYou do have to remove the top or top supports. To be able to remove the front or rear body section from the cart.
What is a cowl on a golf cart?
Cowls are the forward portion of any golf cart where your instruments are mounted and if it were an automobile where the hood might be located. Golf Car Catalog offers a full line of front cowls for EZGO, Club Car, Yamaha and some other golf cart brands.
How do you change the leaf springs on a Club Car DS?
0:001:02Heavy Duty Rear Leaf Spring Kit For Club Car DS - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd unscrew the four nuts holding the spring in the middle. Then you're going to slide the new leafMoreAnd unscrew the four nuts holding the spring in the middle. Then you're going to slide the new leaf spring in and bolt it back down the exact same.
How do you change a leaf spring on a golf cart?
1:043:58EZ-GO® TXT Golf Cart Heavy Duty Leaf Springs - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe next step is to remove the rear shackle plates using a 9/16 socket. Wrench. With a shackle pipeMoreThe next step is to remove the rear shackle plates using a 9/16 socket. Wrench. With a shackle pipe remove retain their bushings and spacers for later installation.
What are dual action leaf springs?
The Dual Action Leaf Spring provides a comfortable, factory-style ride with two passengers while the Heavy Duty "helper leaf" kicks in when needed to handle rear seats, cargo boxes or extra passengers! Capable of supporting 500 more than stock springs.
How do you jack up a Club Car Precedent?
0:321:54How To Lift Your Golf Cart Onto Jack Stands | RZ Carts - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go aheadMoreOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go ahead and lower it slowly out of the jack stand making sure nothing shifts are at this process.
How do I align my club car precedent?
2:183:45How to Adjust the Toe In on a Club Car Precedent Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd actually turn the tie rod. Itself one of the pasture side you go up. And it brings to toe in onMoreAnd actually turn the tie rod. Itself one of the pasture side you go up. And it brings to toe in on this tire inward. Where on the driver side would be exactly opposite this one would go back.
Who makes Precedent golf carts?
Club CarIn 2004, Club Car launched the Precedent i2. This golf cart model has a fleet based on five years of research and development that quickly sets the standard for style and comfort.
How to restore a golf cart?
Steps. Apply some dish soap all over the golf cart and wash it using a hose fitted with a fine spray nozzle. Use a microfiber cloth to spread the dish-wash soap uniformly, both inside and outside the cart. Take some water in a bottle with a spraying mechanism and spray on the surface that has to be restored.
How to repair a crack in a golf cart?
You can try the following options to repair cracks on a plastic golf cart body. Drill through the crack in a V shape and put a plastic weld on the rear. Fix some plastic tape on the front side so that the weld doesn’t push through. Drill the crack at the end so that it doesn’t become bigger.
How to clean a golf cart with soap?
Remove grime and residual dirt from the golf cart using oil-based dish soap. Wash the soap off using cold water from a hose. Wipe the cart using a towel and let it dry completely.
What is a golf cart made of?
The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal. The 1993 model Club Car used an indestructible thermoplastic ...
How to paint a dark cart?
Apply a thin coat of plastic primer spray paint on the surface to be painted. You might need an extra coat if you’re planning to give your dark colored cart a light color. In this case, give a drying time of about half an hour before you apply the second coat. Paint the cart using acrylic or plastic-fusion paint.
How to align club car front end?
The best way of aligning the Club Car front end is to first adjust the placement of the camber, followed by the alignment of the wheel and tire, by toeing them in or out as per required .
Why is my club car front end loose?
A loose suspension in a Club Car may be because of the faulty suspension joints, worn-out power steering pump or damaged ball joints. A loose suspension can also be due to issues with bearings or loose nut joints in your Club Car. Faulty suspension joints. Damaged ball joints.
What to do if camber does not budge?
If the camber still does not budge, redo the procedure on both joints and keep adjusting the position as required. After the front end of the driver’s side is completed, redo the whole procedure for the front tire on the passenger side of the Club Car.
Why does my golf cart wobble?
If the front-end of your golf cart wobbles while driving, it could be due to faulty and/or non-branded tires, incorrect tire alignment or a faulty engine. Faulty and/or non-branded tires. Incorrect alignment of the tires. Faulty engine.
What causes a club car to crash?
Front Leaf Spring Bushings: Worn-out bushings in the front leaf spring can cause the Club Car to crash while in motion and could also cause camber and tire issues. Replacing all the above parts will fix the front end problems and also improve overall control, camber and tire of your Club Car.
How to loosen lug nuts on club car?
You must do this on all of the bushings to make the process easier later on. Jack up the Club Car from the back. Use a ¾-inch socket to loosen the lug nuts on the back tire.
How to fix a club car that is wobbling?
Steps to fix the wobble: Align the tires properly. Examine the height of the tires and ensure that the placement of both tires is even. Pull out the tires and clean them if there is any dirt jabbed in them. You must also consider inspecting the engine of your Club Car , along with the steering wheel.
What parts do you need for a golf cart?
Some of the crucial parts you are going to need to include longer shocks, springs, axles, and A-arms. A support plate may also be necessary, at least for most golf carts. The support plate goes directly to the golf cart and attaches your custom lift kit to the wheels.
Where do you put support plates on a club car?
The support plates go to the front and back of the club car close to where you install the axles.
What do you need to lift a Yamaha golf cart?
Some of the tools and equipment that you require include a floor jack, wheel chocks, jack stands, small pry tool, and needle-nose pliers.
What to do if you have trouble with your cart axles?
If you’re having trouble with the axles, let a professional do it for you. There is no harm in asking for help, and it goes a long way into ensuring your safety and durability of your cart. You can move on to the A-arms if you’re comfortable with this step.
What was the golf cart meant for?
In the not so far away past, golf carts were meant for the greens. You get the idea; flat surfaces with extremely short grass. However, the golf carts have moved past the golf courses into residential communities, beaches, backcountry areas, retirement communities, educational institutions, and hospitals, among others.
Can you buy a lift kit for a golf cart?
A simple mistake will take you back several hundred or even thousand dollars. If that happens , well, then it would have been better to purchase a lift kit for your golf cart. But on the bright side, a homemade lift kit for a golf cart is the most rewarding.
Do you need a lift kit for rear suspension?
Well, the fact that you also need a lift kit for the rear suspension seems like a disadvantage, but it is not . The lift kit sure gives you a bang for your buck, and it is easy to install. A bonus is an aesthetic appeal to keep the heads turning.
How to tighten a golf car bearing?
Screw the bearing puller into the center of the axle and wrap its arms around the back bearing housing. Tighten the bearing puller until the bearing is released. Pull the axle from the golf car with your hands. Some bolts may be locked in place because of their age.
Why does my golf cart drive axle fail?
The drive axle for a golf cart rarely fails because of the low power of the motors. You may need to remove one to change the bearing or if a gear is stripped.
When was the golf cart invented?
The golf cart was invented in 1962 by Merlin L. Halvorson. The golf cart allows golfers a more relaxing way of getting around the course verses walking and carrying their clubs. Like all mechanical devices, golf carts require maintenance and repair to operate properly.