Golf-FAQ.com

how to remove the tires from a club car golf cart

by Precious Berge Jr. Published 3 years ago Updated 2 years ago
image

Using the floor jack, raise the golf cart so that the tire is slightly above the ground Remove the lug nuts and the tire completely Place the replacement tire on the wheel hub so that the tread appears to go toward the front, thus allowing the grass, dirt, and mud to be diverted away from the tire when in use.

Part of a video titled Replacing Golf Cart Tire - YouTube
0:29
1:53
And just make sure that you don't jack up your jack just yet you want the pressure on the tire soMoreAnd just make sure that you don't jack up your jack just yet you want the pressure on the tire so that you can remove the nuts without the tire moving we've removed the nuts.

Full Answer

How to change a tire on a golf cart?

You need to lower the lift slowly. Once lowered, you can remove the jack stand from under it and then place your golf cart back on its wheels. The final step is to adjust and move the jack to the remaining tires if you are replacing the other tires.

How do you jack up a golf cart?

To jack up a golf cart you’ll need to locate the jack points, engage the parking brake and then use a jack to carefully lift the golf cart in the air. Locate the jack point on both sides of the back wheel.

Where is the jack located on a RXV golf cart?

Whether you’re driving an EZ GO RXV or another golf cart, the jack points are located in the front and rear of your vehicle. They will be a metal bar that may have an arrow pointing to it with “JACK” written next to them. There will also be a bracket attached for you to place the jack under when lifting. What Tools do I need to jack up a golf cart?

image

How do you take golf cart tires off?

1:044:26Easy Golf Cart Tire Change - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike the other dismounts I always bring the tire up to the tool pullback to create space turn andMoreLike the other dismounts I always bring the tire up to the tool pullback to create space turn and lock on the lobe. And once again holding the tire de Graaff of spinning pull the bar towards.

Can you change golf cart tires yourself?

Instructions to Replace Golf Cart Tires Remove the lug nuts using the proper socket size. Pull the wheel off of the lug studs. Use the valve stem tool (as per package instructions) to remove the valve from the tire stem. Lay the wheel down on pavement and push the tire down as close to the rim as you can get.

How do you remove lug nuts from a golf cart?

0:181:44Removing Golf Cart Wheels & Tires (EZ Go, Club Car, Yamaha)YouTubeStart of suggested clipEnd of suggested clipBe sure to loosen the lug nuts slightly before lifting the cart. First you're going to take aMoreBe sure to loosen the lug nuts slightly before lifting the cart. First you're going to take a flathead screwdriver. And pry under this look to go ahead and remove the club car.

How do you jack up a Club Car golf cart?

0:401:54How To Lift Your Golf Cart Onto Jack Stands | RZ Carts - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go aheadMoreOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go ahead and lower it slowly out of the jack stand making sure nothing shifts are at this process.

How much does it cost to change a golf cart tire?

Depending on your setup as far as tools and equipment are concerned, you may need a professional to complete this project. If you are purchasing a set of tires that are not mounted, you will spend around $50.00. For premounted tires, you can expect to pay $75-$200 per tire.

Can I use fix a flat on golf cart tire?

Fix-a-Flat is designed to be used in automotive highway tires (Cars, trucks, SUVs, etc.). Fix-a-Flat should not be used in tires on motorcycles, ATVs, tractors, lawnmowers, bicycles, scooters, golf carts, etc.

What size socket fits a golf cart lug nuts?

Deep Socket Lugs Standard 1/2"

What size are the lug nuts on a Club Car golf cart?

1/2-20 Size16 Pack of Chrome Lug Nuts Standard 1/2-20 Size for Club Car & EZGO Golf Carts. Be the first to write a review.

How do you unscrew tire bolts?

0:352:31Remove Lug Nuts Without an Impact Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it on the lug nut. Attach it to your breaker bar and then you're gonna turn it clockwise. AndMorePut it on the lug nut. Attach it to your breaker bar and then you're gonna turn it clockwise. And then quickly with the breaker bar yank.

How much does it cost to lift a Club Car golf cart?

A lift kit for a golf cart is usually priced around $250. If you install the kit yourself, then your expenses will end there. If you need to hire someone to lift your cart, on average, this will cost you about $75.00 per hour. Lifting a golf cart is a job that will take a few hours.

How much do golf carts weigh?

between 500 and 1,100 poundsSo, what is the average golf cart weight? A golf cart typically weighs anywhere between 500 and 1,100 pounds. The wide discrepancy has to do with the make, model, and type of golf cart. Additional modifications can also increase the weight of a golf cart.

Where should you place the chock blocks on a golf cart?

Wheel chocks must be positioned downhill and below the vehicle's center of gravity. On a downhill grade, position the chocks in front of the front wheels. On an uphill grade, position the chocks behind the rear wheels. On a level grade, position the chocks on the front and back of a single wheel.

How to remove lug nuts from car?

If your car has a wheel cover, remove it to expose the lug nuts. Then, use your tire tool to remove the lug nuts from the wheel. After removing the lug nuts, remove the wheel from the lug studs.

How to raise a golf car?

Raise your golf car up using the floor jack. You should aim to position the jack on the part of the chassis closest to the wheel you’ll be working on. Stabilize the other three tires with your brick, wood, or other sturdy material.

Can you change golf tires?

The process of changing a golf car’s tire is similar to changing the tire of a standard vehicle. However, there are a few differences in the process due to the smaller size of a golf car and the sometimes differing structure of their wheels and tires. Follow the steps below to change your golf car’s wheels.

Do golf cart tires need to be changed?

Like cars and other vehicles, golf cars will occasionally need to have their wheels changed. This could be due to damage or normal wear , but regardless of the reason, it’s important to know how to change your golf car’s tires properly before beginning. To successfully change your tires, follow these tips for how to replace golf cart tires correctly.

Do you need to remove the valve stem from the tire stem to remove the tire?

Sometimes, the wheel and tire of the car come preassembled. But if you are only replacing the tire—not the wheel—you’ll need to remove the valve stem from the tire stem to fully remove the tire. Your package should come with a tool for this purpose.

How to lower a golf cart tire?

Using the floor jack, gently lower the golf cart so that some pressure is put onto the new tire (in order to keep it from spinning) Tighten the lug nuts until they are completely secure. Using the floor jack, completely lower the golf cart until the weight rests on the tires – not the floor jack. Remove the floor jack from underneath the golf cart.

Where to put replacement tire on golf cart?

Place the replacement tire on the wheel hub so that the tread appears to go toward the front, thus allowing the grass, dirt, and mud to be diverted away from the tire when in use. NOTE: If you will not be replacing your tire right away, lower the golf cart using the floor jack so that the golf cart is level until you return.

How to remove lug nuts from golf cart?

Do not remove the lug nuts – simply loosen them. Place the floor jack underneath the golf cart frame, near the tire being changed. Using the floor jack, raise the golf cart so that the tire is slightly above the ground. Remove the lug nuts and the tire completely .

How to stop a golf cart from rolling?

Make sure that the golf cart is on level ground before changing the tire. Turn off the engine and put the parking brake on. Wedge material against the other tires (not the one that is being changed) to prevent the golf cart from rolling. Using the tire tool, loosen the lug nuts of the tire being changed in a counter-clockwise direction.

Why do you need a floor jack for a golf cart?

A small floor jack is needed because so it can fit underneath the golf cart. And since golf carts are lighter, smaller floor jacks are able to withstand the weight. Bricks, wood, or other material that can be used to wedge underneath other tires to prevent rolling.

What to use to wedge a golf cart?

Floor Jack – make sure that it is able to fit underneath the golf cart. Bricks, wood, or other material that can be used to wedge underneath other tires to prevent rolling. Socket wrench, racket, or other tire tool that will be used to remove the lug nuts. Replacement tire or fixed tire.

Can you put your arms under a golf cart?

Do not put your legs, arms, or other body parts underneath the golf cart, even when raised with the floor jack. Do not allow other people or children to be seated in the golf cart while you are changing the tire. Do not allow other people or children to play around the golf cart while you are changing the tire.

How to jack up a golf cart?

The steps to jack up a golf cart safely are: Locate the jack points. Engage the parking brake. Turn the power off on your golf car. Choke the rear wheels. Locate the frame rail underneath the golf cart. Place the jack in the jackpoints. Carefully lift up the golf cart. Slowly lower the jack.

Why do you need a chock on your golf cart?

A chock will help to keep everything stable when lifting your golf cart.

Why do you need to engage the parking brake when jacking up a golf cart?

It should be engaged before jacking up a golf cart because it will help prevent the rolling of the vehicle during the lifting process and keep wheels from spinning while being lifted off the ground.

What is the difference between a golf cart and a jack?

The difference between jacking up a vehicle and lifting a golf cart is that when you jack up a vehicle, the tires are off the ground. When lifting, it is usually lifting just one tire.

What do you need to jack up an EZGO golf cart?

In order to safely jack up your EZGO or Club Car golf cart, you’ll need a jack, jack stand and a floor mat. Jack. Jack stand to raise the vehicle off of the ground. a floor mat (optional) If you don’t have a jack, a cinderblock will work, but this is not recommended due to safety concerns. A jack stand should be used to support ...

When do golf carts need to be jacked up?

A golf cart needs to be jacked up at times when the tires need replacing or if there is a flat tire.

Where is the jack point on a car?

Locate the jack point on both sides of the back wheel. The jack point is usually located by the side frame, just behind the front wheel or inboard of where they meet.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9