Figure 15 With the engine and transmission safely supported remove the two 18mm transmission mounting bolts (yellow arrows). With a friends help separate the transmission from the engine. Carefully lower the engine (approx 3-6 inches) until you can pull the transmission off and clear of the engine.
Full Answer
How do you remove the transmission from the engine case?
You need to place the jack at an angle that will allow you to pull the transmission direct back and away from the engine case. Figure 14 Remove the cross brace from the transmission mount to the transmission (red arrows).
How do you remove the transmission from a Ford Ranger?
Carefully lower the engine (approx 3-6 inches) until you can pull the transmission off and clear of the engine. Have a friend to help steady the transmission case while you lower it out from under the car.
Can you remove a transmission from a front wheel drive car?
If you have never removed a transmission from a front wheel drive car before it is a really good idea to have a friend or two to help when it comes time to separate and lower the transmission. We demonstrate how to perform the job using a floor jack and an engine hoist.
Step 4 Front Windshield Wipers
Use a flathead screwdriver to remove the cap from the windshield wiper.
Step 5
Use a socket wrench to release the passenger-side windshield wiper locking nut.
Step 9
Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover.
