Instructions
- Replace the Shafts. Maybe your old clubs have shafts that have "gone dead," and they need to be replaced. Or you have...
- Change the Club Heads. Not only are there numerous club heads available for conventional irons and woods, but there are...
- Cut Shafts to the Proper Length. If you are comfortable with the length of your clubs, simply measure each shaft...
Full Answer
How much does re-shafting golf clubs cost?
The cost of re-shafting a golf club will depend on the number of clubs, the type of materials, as well as the professional that is doing the job. How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club .
How much does it cost to reshaft a golf club?
So, how much does it cost to reshaft a golf club? To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts.
How to regrip golf clubs [7 Easy Steps]?
How To Regrip Golf Clubs Yourself. You will need the following… New grips; Double-sided tape; White Spirit; A sharp Stanley knife or similar; A cloth; A receptacle as long as a grip; A vice with shaft protector; Step 1: Remove the old grips. First, cut or peel off the old grips, which may or may not be straightforward depending on how long they’ve been on.
What solvent to use for regripping golf clubs?
What Solvent Is Used to Install Golf Club Grips?
- Commercial Grip Solvent. The process of replacing golf grips includes placing tape on the golf shaft, and then lubricating the tape with solvent in order to deactivate the tape's adhesive.
- Mineral Spirits. You can also use mineral spirits, found in any hardware store, to install your golf grips. ...
- Nail Polish Remover. ...
- Water. ...
How do you refurbish old golf clubs?
2:2524:18how to refurbish an old golf club 2020 - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust some water and some scraping and away we go yep okay had to stop because we had a customer howMoreJust some water and some scraping and away we go yep okay had to stop because we had a customer how about that. Okay just a few minutes with the with the groove it brush.
Can you refurbish golf clubs?
GOLF CLUB REPAIR: REFURBISH VS REPLACE When it comes to golf club refurbishment, it's often more about improving the look of your clubs rather than their playability. If a standard cleaning won't do, a golf club refinishing can help return your clubs closer to their original, polished state.
How much does it cost to repair a golf club?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How do you clean golf clubs for resale?
Mix warm water and 2 teaspoons of dishwashing liquid or soap into a bowl or a bucket (depending on how many clubs you need to clean). Dip your soft-bristle brush or toothbrush into the mixture and carefully scrub your club head, making sure that it doesn't get too wet.
Can you remove rust from golf clubs?
0:212:14Golf Information : Removing Rust From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut if you take a piece of steel wool. And just lightly brush it right along the edges it'll get ridMoreBut if you take a piece of steel wool. And just lightly brush it right along the edges it'll get rid of all of this rust as you can see it's shining up rather nicely.
How do you fix a chipped golf club?
How to Repair Paint Chips on Golf ClubsPurchase the paint. ... Remove dirt and grit from the club. ... Brush a small bit of paint on the club's chipped area with a foam brush. ... Sand the new paint lightly with a piece of fine-grit sandpaper, if required. ... Buff the painted area with wax paste and a clean cloth.
Can irons be Reshafted?
Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.
Is it worth it to Reshaft irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Are steel or graphite clubs better?
Historically speaking, steel shafts have been better for more advanced or higher swing speed players. Graphite has been more ideal for people with more moderate swings or players wanting maximum distance.
Can you use WD40 to clean golf clubs?
Remove the golf clubs from the bag; if you spray WD40 on your bag, it will smell for a long time. Spray the WD40 on your irons and wedges and let it sit for a few minutes. Take a dry cloth and wipe the WD40 off the clubs. Once it is off, you can wash and rinse the clubs.
Does WD40 remove rust from golf clubs?
You can use WD-40 on golf clubs. It can be an effective way to remove rust and dirt from the head and shaft. It can also be used to remove the grip, acting as a solvent when you are applying a new one. Learning how to keep your golf clubs clean is vital.
Do Dirty golf clubs make a difference?
A dirty club face can cause a shot to start off line, impart an unwanted spin, and ultimately lead to higher than needed scores. With data supplied by FlightScope, let's examine the facts. Keeping Your golf Clubs Clean insures you have the absolute best chance of optimizing the ball flight of every shot.
Replace the Shafts
Maybe your old clubs have shafts that have "gone dead," and they need to be replaced. Or you have read about new shafts that contribute to greater distance or are more forgiving. Regardless, they are easy to replace.
Change the Club Heads
Not only are there numerous club heads available for conventional irons and woods, but there are also club heads for hybrid clubs, as well as wedges of various degrees.
Cut Shafts to the Proper Length
If you are comfortable with the length of your clubs, simply measure each shaft from about ½ inch below the hosel's opening to the butt end of the shaft, and then cut the corresponding new shaft to that length with a hacksaw.
Change the Grips
With a few basic tools, changing your own grips can be done easily and relatively inexpensively. Cut the grip lengthwise to the shaft and remove it. Get rid of the tape and residue with a putty knife; then wash the shafts with warm, soapy water. If any residue remains, try using a little grip solvent.
How to remove old golf grips?
Remove the old grips by cutting each, then strip them off. Remove the old tape with a putty knife as well as the remaining residue, first with grip solvent, then with warm soapy water. Cover the area where the grips will be placed with double-sided tape, then soak it with the grip solvent.
What are the elements of a golf club?
Remember, there are only three elements to every golf club: the shaft, club head and grip. If you have improved your game since you bought your clubs and you are hitting the ball farther, consider replacing the shafts with those that are stiffer. If you are hitting the ball shorter, think about replacing the shafts with softer, more flexible ones.
How long does it take for grip solvent to dry?
Eliminate the remaining solvent and push the grips onto the shafts. Because the grip solvent needs about 15 to 20 minutes to dry, you will have plenty of time to make final adjustments. Sorry, the video player failed to load.
How to remove a broken shaft from a vise?
Step 1. Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets ...
Can you replace a golf club shaft?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
What is refinishing irons?
Refinishing Irons. The refurbishing process changes depending on your irons. If you play chrome-forged, carbon steel irons, you may want to rechrome them to bring back the luster of their original state. Most refurbishment jobs target performance, by repairing nicks, scratches and dents. Rechroming.
How to paint a driver's sole?
Focus your efforts to the sole and the crown. Begin painting. Begin with the crown, find a color match for the crown, then slowly apply smooth strokes with your paintbrush.
Can you use steel wool on a driver?
Warning: Never use steel wool on your driver and fairway wood club heads. It will scratch the crown and face, and be sure to dry the head completely to avoid oxidation. Steel wool bristle club cleaners are great at getting dirt and sand out of iron grooves, but never clean your driver with them. Let the club dry.
Is refurbishing a club difficult?
Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs. Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs.
Sole and Toe Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We grind the sole and remove any damage and scratches. We then buff the area to bring back the shine. Please note that all orders that include refurbishment must be placed by phone.
Club face Refurbishment
Before you complete your purchase, you may request additional refurbishment services available on any used Irons or Wedges. We polish the face and remove many of the cosmetic damage and scratches. We then buff the area to bring back the shine.
ADDITIONAL SERVICES
In addition to our refurbishment programs, we offer many additional customization services for your clubs. When your getting your clubs serviced, you might want to add on these services to increase the life of your new club.
