How To Re-Shaft Your Steel Golf Clubs
- Carefully clamp the shaft into a vise using a Shaft Vise Clamp. ...
- When removing steel shafts from clubheads, use a torch to heat the hosel. ...
- After 30 seconds of heating, with your gloved hands grasp the head and twist/pull the head. ...
- Using a wire brush remove excess epoxy from the inside of the hosel.
- Once the hosel has cooled, apply Blue Away to a paper towel and rub the hosel to remove any heat marks created by the heating process.
- Measure the shaft tip with a Shaft Identification Gauge. Most iron shafts will be either a .370″ or .355″ tip and metalwoods a .335″ or .350″ tip size.
How much does it cost to reshaft a golf club?
So, how much does it cost to reshaft a golf club? To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts.
When to reshaft your golf clubs?
What is a golf club shaft?
- Steel – There are two types of steel shafts: stepped steel and rifle steel. ...
- Graphite – These types of shafts are less durable and typically more expensive.
- Multi-material – This type of shaft is a combination of steel and graphite shafts.
How do you shorten a golf club shaft?
To do that, the DIY golfer will have to:
- Remove the existing grip.
- With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
- Re-install a grip on the newly shortened shaft.
- And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. ...
How much does a golf club shaft replacement cost?
With a vast array of shafts to choose from, there are options to fit every budget. For the budget-conscious golfer, replacement shafts can start at $30 for no-frills, entry-level quality. For players who are willing to pay a bit more, there are plenty of options lying between $50 to $200, for shafts in all five flex categories.
How do you remove a steel shaft from a golf club?
0:042:32How To Remove A Steel Golf Shaft From A Golf Club - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can also use a heat gun but it's going to take three times as long. The other things that you'reMoreYou can also use a heat gun but it's going to take three times as long. The other things that you're going to need or a club making vice vice clamp some heavy-duty gloves and probably a knife.
Can you change a shaft in a club?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.
Can I change a driver shaft myself?
It's usually best to consider having shaft replacement done by someone who knows what they are doing. Instead of paying the pro shop the next time you need to change a golf club shaft, save money by doing it yourself at home.
Can you replace steel shaft with graphite?
On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip.
How much does it cost to re shaft a golf club?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How do you Reshaft a golf club at home?
2:2522:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heatMoreUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
How do you Reshaft a driver at home?
0:144:53How To Reshaft Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tipMoreHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tip taken basically the paint off the shaft that way to here to the epoxy.
How much does it cost to Reshaft a driver?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
How do you install a golf shaft?
4:297:38How to Install Graphite Golf Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel.MoreThe butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel. Remove the head and place some epoxy inside the hosel dip the tip of the shaft into the epoxy mix.
Do the pros use graphite or steel shafts?
In total 100% of the top 100 PGA Tour pros use graphite shafts in their drivers, fairway woods and hybrid clubs. 14 out of the top 100 use graphite shafts in their utility irons while 21 pros use steel.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
Can you Reshaft steel irons?
Can I Reshaft My Golf Irons Myself? Golf irons can be a bit easier to reshaft than a driver. If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project.
How to remove a broken shaft from a vise?
Step 1. Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets ...
Can you replace a golf club shaft?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
Introduction
Steps to replace an old golf club shaft with a new steel shaft and replace an old grip with a new one.
Step 1 Golf Club Steel Shaft and Grip
Using propane or a torch, heat the hosel of the club to remove the steel shaft from the club head. The heat will break the epoxy bond that holds the head to the shaft.
Step 2
Use a wire brush to clean out the remains of the old epoxy from the club head.
Step 3
Use a piece of sand paper or a grinder to roughen the tip of the shaft where it connects to the hosel of the club head.
Step 4
Pour epoxy into a container and stir to mix it together. Once epoxy is mixed together, spin the shaft tip into the epoxy to prepare for insertion into the head.
Step 5
Insert the shaft into the club head. Hold the head and shaft together for approximately 30 seconds to secure.
Step 6
To replace the grip of the club, place the club on a level surface where you can cut a straight line through the grip using a razor blade or a utility knife.
Series Navigation
In this video, I show you how to remove the putter head from the shaft. I use a propane torch, but a heat gun would suffice too. This technique can be used for irons, wedges, etc.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.