Replace ABS Control Module MK60EC1 - VW Golf GTI MK6 2011
- Ignition switched on.
- Connected VCDS and perform “Coding” ABS module and keep VCDS stay connected with the interface unit.
- Start the vehicle.
- Turn the steering wheel one turn to the right and one turn to the left.
- Drive in a short distance for 30-40 meters straight line at a speed not higher than 20...
Full Answer
How does the ABS system work on a VW?
The ABS system consists of 5 main parts: four ABS sensors and the ABS module. One ABS sensor is located on each of your vehicle’s wheels. It keeps track of the individual wheel’s speed. If your VW has lost traction, the ABS sensors will relay that information to the ABS module.
Where is the ABS unit on a GTI MKV?
The ABS system will require coding and setting with a scan tool after installation. Also you can not drive the car until you have completely bled the brake system. The ABS unit for the GTI MkV is tucked up on the firewall on the right side of the engine bay.
Where is the ABS light on a Volkswagen?
This is usually located within your car’s gauge cluster on the dashboard. However, If your Volkswagen is an older model, it may not have an ABS light. In this case, the check engine light will come on instead.
What are the different components of the ABS system?
There are different components of the ABS, including various sensors on each wheel and the module itself. The sensors relay information about the wheel speed back to the module, which makes adjustments to the braking system effectiveness.
Can I replace my ABS module?
The total cost of parts and labor to replace an ABS control module can be anywhere between $320 and $1,000 depending on the cost of the control module itself and how difficult it is to find. Despite the cost, you should replace your cars ABS control module if: The brakes lock up even when you are driving normally.
Is it hard to replace an ABS module?
Replacing an ABS module is a varied repair — on some vehicles, it can be very straightforward and simple while it is arduous and complicated on others. The complications can occur in the programming to the vehicle, the bleeding procedures, or the installation in cases where all the brake lines need to be removed.
How do I reprogram my ABS control module?
2:388:10WHAT FORD DOESN'T WANT YOU TO KNOW! ABS MODULE ...YouTubeStart of suggested clipEnd of suggested clipSo we're going to go ahead and move back then we're going to go ahead and click on moduleMoreSo we're going to go ahead and move back then we're going to go ahead and click on module programming. And you should be able to see a function for pmi programmable module installation.
What are the symptoms of a faulty ABS module?
Signs Of A Faulty ABS ModuleThe ABS Warning Light Glows. This is the most common sign of problems with the ABS system. ... The Brakes Lock Up. The ABS system is specifically designed to prevent any wheel from locking up during heavy braking. ... An Unresponsive Brake Pedal. ... Increased Pedal Effort. ... Speedometer Failure.
Can you drive without ABS module?
You can still drive without a functional ABS control module, as long as there's no problem with your conventional brake system. However, take extra care, especially in wet or slick conditions, as the brakes' anti-lock element won't work, and you likely won't have steering control if your tires lock up.
What happens if you disconnect the ABS module?
0:151:59Lessons from a Car Expert : How to Disable an ABS System - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou could shut it off by removing the fuse your brakes will still work normally.MoreYou could shut it off by removing the fuse your brakes will still work normally.
Can a used ABS control module be reprogrammed?
After a consultation here, we think a used ABS control unit would transfer to your car, and would not need programming to work. In fact it can only be programmed once, so it will stay programmed to it's original car. That won't matter, though since they are similar cars. It will have to be coded, a lesser issue.
Where is ABS module located?
The ABS control module is found in the engine compartment of most vehicles. However, it can also be found on the driver's side frame rail in a few models. You may need to lift the vehicle to find the ABS control module. It could also be located under plastic panels or covers.
How do I know if my ABS relay is bad?
Check Engine Light / ABS Light is on One of the first symptoms of a defective ABS relay is an illuminated Check Engine or ABS Light. If the computer detects that the relay has failed, or is giving an abnormal reading, then it will activate the Check Engine or ABS Light to alert the driver of a potential problem.
How long does it take to program an ABS module?
This reprogramming procedure may take up to 30 minutes or more depending on the file size.
How much does it cost to replace an ABS sensor?
The average ABS wheel speed sensor replacement cost is between $200 and $400 per sensor, depending on the car model and labor costs. You can expect to pay about $100 to $150 for the wheel speed sensor and another $100 to $300 for the labor.
Is it safe to drive my car with the ABS light on?
It's Safe To Drive Carefully With The ABS Light On. But Get It Looked At Quickly. You can still drive the car with your ABS light on, because it does not impact normal braking. However, we wouldn't recommend you do this because your ABS system helps to control stopping, and it can be dangerous to be driving without it.
What happens when ABS module fails?
When the module fails, it is common to experience erratic brake behavior, including locking brakes.
What part of the VW car fails?
One such part that commonly fails in Volkswagen cars is the ABS module . If you’re not sure what the ABS module does for your VW, you’re not alone. In this article, we’ll go over the basic idea of the ABS module, what to look for when it isn’t functioning properly, and what you can do to keep this from happening in the future.
What is anti-locking brake?
Anti-locking brakes were designed to keep the wheels from seizing when the brakes have to be applied fast and hard, allowing the car to come to a full and complete stop without hydroplaning or skidding at all. There are different components of the ABS, including various sensors on each wheel and the module itself.
What does the ABS light mean?
ABS Light. Various systems in your car have warning protocols to alert the driver of a system failure or error. The ABS is no different. Rather than the oil light or the check-engine light, the ABS light will alert the driver and the automotive specialist that there is an issue related to the anti-lock braking system, ...
Can you catch ABS issues before total failure?
Your brakes are critical for your safety, and any problems with the ABS should be taken seriously. You can certainly catch ABS issues before total failure, but it’s important to know what to look for:
Can you prevent an ABS module from failing?
What You Can Do to Prevent ABS Module Failure. Since the Volkswagen manufacturer is aware of the tendency for the ABS module to fail, they have taken precautions in their maintenance instructions. While it certainly helps to follow the recommended maintenance plan for your car, this alone doesn’t prevent ABS module failure.
What is the role of the ABS module in a VW?
The Role Of The ABS Module. The anti-lock braking system or ABS in your Volkswagen is a safety feature that is responsible for keeping your VW’s brakes from locking whenever you apply an excessive amount of pressure to your brakes. This helps to stop your car from losing traction , skidding, or sliding uncontrollably.
How many ABS sensors are there in VW?
The ABS system consists of 5 main parts: four ABS sensors and the ABS module. One ABS sensor is located on each of your vehicle’s wheels. It keeps track of the individual wheel’s speed. If your VW has lost traction, the ABS sensors will relay that information to the ABS module. In response, your ABS module will begin to rapidly pump your brakes in ...
What happens if your ABS module fails?
When your ABS module fails, your brakes are much more likely to lock up when excess pressure is applied. This will cause your Volkswagen to skid or slide across the road. If you want your vehicle to operate safely and reliably, it is imperative that you diagnose and repair this issue as soon as possible. Recognizing the following symptoms of ABS ...
Does Volkswagen have ABS?
Volkswagens, though a very popular vehicle brand, have a known tendency for the ABS module to fail. While precautions are being taken by the manufacturer to prevent as many ABS module issues from happening as possible, being able to recognize the symptoms of ABS module failure on your own is still very important.
Where is the check engine light on a Volkswagen?
This is usually located within your car’s gauge cluster on the dashboard. However, If your Volkswagen is an older model, it may not have an ABS light. In this case, the check engine light will come on instead.
Is a bad speedometer a sign of ABS?
Bad speedometer. Though it’s a rare sign of ABS module failure, a speedometer that’s reading incorrect ly or just not working at all is cause for concern. This should be examined by a professional. If it is indeed a symptom of a malfunctioning ABS module, then a failing speedometer should be accompanied by an illuminated ABS light.
Without a doubt, your brakes are the most important systems on the car
There is an ABS control module that reads the information from various sensors on the vehicle and controls brake modulation. If this control module goes bad it can cause all kinds of problems with your braking system. The ABS system will require coding and setting with a scan tool after installation.
Project Photos
Figure 1 You will need to remove your engine cover or aftermarket air induction system. Please see our article on engine cover or aftermarket air induction system removal for additional assistance.
