how to replace golf club shaft bargain

Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite

shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets the club head.

Full Answer

How much does a golf club shaft replacement cost?

With a vast array of shafts to choose from, there are options to fit every budget. For the budget-conscious golfer, replacement shafts can start at $30 for no-frills, entry-level quality. For players who are willing to pay a bit more, there are plenty of options lying between $50 to $200, for shafts in all five flex categories.

How do you replace a golf shaft?

Shaft Options for Hybrids and Rescue Clubs

• Aldila Shafts. Aldila NVS Orange is an update to Aldila's classic NVS golf shaft. ...
• Fujikura Shafts. Fujikura Motore X is a mid-to-high launch design and the latest addition to the Motore series. ...
• Graphite Design Shafts. ...
• KBS. ...
• Mitsubishi Shafts. ...
• Project X Shafts. ...

How to reshaft a golf club?

Update Your Golf Club With a New Shaft

• Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. Tighten the STSL in a vise. ...
• Measure the shaft tip. ...
• After the tip has been trimmed, abrade or roughen the shaft tip. ...
• Align the shaft graphics the way you want them by rotating the shaft. ...
• Position the club in the normal playing position. ...

How do you shorten a golf club shaft?

To do that, the DIY golfer will have to:

• Remove the existing grip.
• With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
• Re-install a grip on the newly shortened shaft.
• And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. ...

How much does it cost to replace a golf club shaft?

The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.

Can you replace a golf club shaft?

Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.

How do I buy a new golf shaft?

Choosing the best golf shaft is essential for getting the most distance and accuracy from each shot on the course. Match your flex to your swing speed. The higher the swing speed, the stiffer the shaft flex should be. Select from regular, firm, stiff, ladies or seniors flex constructed from graphite or steel.

How much does it cost to get a driver Reshafted?

The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.

How do you Reshaft a golf club at home?

2:2522:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heatMoreUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.

Is it easy to Reshaft irons?

Golf irons can be a bit easier to reshaft than a driver. If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project.

How do I know what golf shaft to use?

Which flex rating you use will depend on the type of swing you have. For example, beginners and those with less powerful swings tend to use a shaft with greater flexibility to propel the ball more. On the other hand, if a player has a high and powerful swing speed, they will require a stiffer shaft with less flex.

Are graphite shafts better?

Graphite shafts are much lighter and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams. As a result, the lightweight shafts on graphite irons can help to create a greater swing speed for more power.

Are steel shafts better than graphite?

Historically speaking, steel shafts have been better for more advanced or higher swing speed players. Graphite has been more ideal for people with more moderate swings or players wanting maximum distance.

Is it worth Reshafting my irons?

Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.

Is a drive shaft expensive to replace?

Usually, the Drive Shaft Repair costs will differ based on what caused the issue and how fast it can be repaired. If you just have to replace it, that would be anywhere from $500 to $1000. However, you can also expect the cost of the parts to be around half that number and the labor costs around $200.

How do you Reshaft a driver at home?

0:144:53How To Reshaft Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tipMoreHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tip taken basically the paint off the shaft that way to here to the epoxy.

How to remove a broken shaft from a vise?

Step 1. Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets ...

Can you replace a golf club shaft?

Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.

How to fix a club head that is stuck to the shaft?

Step 1. Scrape off the ferrule at the bottom of the club head's hosel with a utility knife. Place the club into a shaft clamp to hold it in place while you work on the head. Use a heat gun to heat up the area around the hosel to soften the epoxy glue that connects the shaft to the club head.

How to remove epoxy from golf club?

Remove the club from the shaft clamp and tap the butt end of the grip on the floor to push the shaft all the way into the head. Wipe down the hosel with a soft cloth to remove any epoxy residue. Let the epoxy dry for several hours before using the golf club.

What is the hosel on a golf club?

The hosel is the junction point between the head and the tip of the shaft. Check the size with a shaft identification gauge if you cannot find it on the label.

Can you replace a golf club shaft yourself?

It's usually best to consider having shaft replacement done by someone who knows what they are doing. Instead of paying the pro shop the next time you need to change a golf club shaft, save money by doing it yourself at home. Make sure your replacement shaft is the same size as the original or it might not fit inside the club head's hosel.

Introduction

Steps to replace an old golf club shaft with a new steel shaft and replace an old grip with a new one.

Step 1 Golf Club Steel Shaft and Grip

Using propane or a torch, heat the hosel of the club to remove the steel shaft from the club head. The heat will break the epoxy bond that holds the head to the shaft.

Step 2

Use a wire brush to clean out the remains of the old epoxy from the club head.

Step 3

Use a piece of sand paper or a grinder to roughen the tip of the shaft where it connects to the hosel of the club head.

Step 4

Pour epoxy into a container and stir to mix it together. Once epoxy is mixed together, spin the shaft tip into the epoxy to prepare for insertion into the head.

Step 5

Insert the shaft into the club head. Hold the head and shaft together for approximately 30 seconds to secure.

Step 6

To replace the grip of the club, place the club on a level surface where you can cut a straight line through the grip using a razor blade or a utility knife.

What is re shafting a golf club?

Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.

How much does it cost to reshaft a golf club?

How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.

How to remove old shafts on iron?

During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.

How much does a bore thru head cost?

Clubs that require a special adapter such as a bore-thru head can cost an extra $5 to $20. If doing the job yourself, tools such as the grips, dremel tool epoxy glue, tape and solvent will be needed in order to complete the job.

What does a good club fitter do?

A good club fitter will also speed up the search process and get you back on the course with confidence. With a good fitter, you can try all the relevant new drivers/irons/etc in one session, decide what you need to do, and get back to playing golf.

Can you get rid of a putter?

Never. If you have a putter that works, never get rid of it. It won’t wear out (barring abuse), and while there have been improvements in putter design over the years, boatloads of money is still being won on Tour with putter designs that are decades old.