how to replace golf driver shaft

by Dr. Leatha Gerlach MD Published 3 years ago Updated 2 years ago

How Do I Change a Golf Shaft?

Scrape off the ferrule at the bottom of the club head's hosel with a utility knife. ...
Push on the base of the hosel with a pry bar to release the head from the shaft. ...
Use a utility knife or sandpaper to remove the paint from the tip of the replacement shaft. ...
Apply epoxy glue to the shaft's tip and insert it into the hole at the base of the hosel. ...

Part of a video titled Golf Equipment : How to Change a Golf Shaft - YouTube

0:33

5:55

Tool so we lay it in in this little groove right here which is going to slide back and forth and putMoreTool so we lay it in in this little groove right here which is going to slide back and forth and put pressure and pull on the head as the shaft is heated. Then we tighten the shaft down in the tool.

Full Answer

How do I clean up golf club shafts?

Mar 24, 2010 · Changing a golf shaft requires the use of many tools, especially a heat gun. Change your golf shaft with help from a professional golf instructor in this fre...

How do you replace a golf club shaft?

Jul 07, 2019 · Items in Video: (Affiliate Links) Golf Shaft - https://amzn.to/2J9oSTJ Ferrule - https://amzn.to/32086xM Epoxy - https://amzn.to/2J97uhT Heat Gun - https...

How much does a golf club shaft replacement cost?

How to Repair & Replace a Golf Club Shaft. Step 1. Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the ... Step 2. Step 3. Step 4. Step 5.

How to shorten golf club shafts?

May 22, 2018 · Got a long distance repair request from New York for a Callaway 460 bore thru golf shaft replacement. This is a comprehensive video for pulling a bore thru a...

Can you Reshaft a golf driver?

Can Golf Drivers Be Reshafted? Golf drivers can be reshafted, however, the adjustable shafts are significantly more difficult to replace than non-adjustable shafts. Playing few rounds with the proposed replacement shaft before committing to the change is highly recommended.Jul 5, 2021

How easy is it to change driver shafts?

Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.

How much does it cost to change the shaft on a golf driver?

The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.

Can I replace the shaft on my driver?

Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.

Can you put any shaft on any driver?

The answer is straightforward: it's capacity to fit with any club head. As a result, whatever golf club preference you have; a wedge, woods, hybrids, or putters, you can ensure that the golf shaft you are comfortable with can go with you in the game.

How do you remove a driver shaft?

As you apply heat, grab the clubhead and gently turn it to begin working it out. Avoid cranking with too much force. The shaft could break off inside the hosel. Work the head free carefully and gradually until it comes off.

Can you get new shafts on irons?

When it comes time to reshaft your clubs, you might be inclined to do it yourself. But if you're unfamiliar with the process, you can visit the Golf Services PROS at your local DICK'S Sporting Goods to get help with the repair. Their Certified Fitters can match you with a new shaft that best complements your game.

How do I know if my golf shaft is regular or stiff?

What's the difference between regular and stiff shafts? A stiff shaft is firmer and harder to bend than a regular shaft, and so more often than not, they're also heavier in weight. As a rough rule of thumb, the more speed you generate, the stiffer your shafts should be.Mar 1, 2021

How much difference does a shaft make on a driver?

Shafts can range anywhere from 40 to 135 grams. Typically the rule of thumb is that a golfer with a slower swing speed will benefit from using a lighter shaft, and you would add weight as swing speed increases. As you might expect at this point, there are always exceptions.May 28, 2018

How much does a graphite shaft cost?

Expect to pay anywhere between $40-$100 reshafting a graphite shaft, if the shaft is steel expect to pay anywhere between $20-$75 per shaft, every replacement shaft needs a new grip which costs $8-$15, and labor costs $5-$35 depending on where you live.

What driver shaft is most used on tour?

Fujikura driver shafts are the most used by the top 100 PGA Tour players with 28 players using them including Justin Thomas, Jordan Speith, Dustin Johnson, Rory McIlroy, Scottie Scheffler and Louis Oosthuizen. The Ventus Blue 6X and Ventus Black 6X shafts are the most popular individual driver shafts.

Can you replace a golf shaft yourself?

Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.

Can you replace a golf club shaft?

Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.

How to secure a ferrule to a shaft?

Place the ferrule onto the shaft. To do this, place a small amount of epoxy on the inside of the ferrule and slide the ferrule onto the shaft, narrow end first. Place your clubhead on top of the ferrule and place the grip end of the club on the floor. Butt down the grip while pushing down on the clubhead to secure the ferrule at the correct depth on the hosel.

How to mix shaft epoxy?

Mix your shaft epoxy on a piece of cardboard with a craft stick. Professional shaft epoxy comes in two parts; mix them together according to the instructions on the epoxy bottles.

Where is Patrick Cameron?

He works out of his home in Denver, Colo. He received his Bachelor of Arts in mass communication from the University of Minnesota.

Do you need to replace a driver shaft?

Whether you are looking for longer distance off the tee or need to repair your driver, there may no better time than the present to replace a driver shaft. With new materials making them lighter, stronger, and more responsive, driver shafts are becoming an increasingly vital and indispensable component of drivers. With a vast array of shafts to choose from, there are options to fit every budget.

What is a driver shaft made of?

When it comes to material, the overwhelming majority of driver shafts on the market are graphite, which is a composite of graphite fibers and epoxy formed into what is essentially a hollow tube that is comparatively stronger than steel, but only half the weight. (Source: golfclub-technology)

What is the role of the shaft in golf?

After all, the shaft is responsible for transferring the tremendous amount of energy generated by the golfer’s swing to the clubhead, which in turn impacts the ball and launches it into the air.

What is a regular flex shaft?

Regular flex shafts are designated with the letter “R.”. Because this is the most popular and common class of driver shafts, regular flex shafts have the greatest variance in price, with models available for player skill levels ranging from entry-level beginners to professional-grade equipment.

Golf-FAQ.com