Open the driver's door. Use a dash trim removal tool (or flathead screwdriver) to pry out the window switch at the back. Lift the window switch and pull towards the back to release the front tab. Release the connector on the back of the window switch.
How to replace the motor on a GTI MKV?
The GTI MkV, unlike the MkIV, has a split regulator system. To remove the motor you will need to remove the inner door panel. To replace the regulator you will need to remove the exterior door handle and door skin as well.
Do you tape the window motor when removing the window?
Figure 2 Window Motor: It is a good idea to tape the window up when removing the motor (red arrows). Once you remove the motor the only thing holding the window up will be the friction in the regulator and window seals.
Can you remove the window motor without removing the regulator?
You can see that you can access the window motor (red arrow) but have no access to the regulator. Figure 2 Window Motor: It is a good idea to tape the window up when removing the motor (red arrows). Once you remove the motor the only thing holding the window up will be the friction in the regulator and window seals.
If you are having troubles with your front door window regulator and it needs to be replaced, this article will take you through the process step by step
The GTI MkV, unlike the MkIV, has a split regulator system. To remove the motor you will need to remove the inner door panel. To replace the regulator you will need to remove the exterior door handle and door skin as well. Please see our article on removing your front door panel, exterior door handle and door skin for additional help.
Project Photos
Figure 1 Window Motor - This photo illustrates the door with the door panel off. You can see that you can access the window motor (red arrow) but have no access to the regulator.
