remove air intake pipe, and box (upper and lower section) take off timing belt cover take off serpintine belt, and v belt rotate engine to TDC marks line up on crank and cam. camshaft says O^T on it and on the cover behind gear, crank has a notch in the pulley and a arrow on the cover to line up remove crank pulley 6mm allens not the 19mm 12 bolt
Full Answer
How do I set the timing belt on an EZGO golf cart?
- Answers How do I set timing belt on ezgo golf cart engine? First remove the timing cover , and then remove the Idler, this is the one with the eccentric on it. At the top of the motor you will see a knotch, and on the cam gear you will see a hole, line those up, make sure the crank keyway is straight up, and put it all back together.
What happens if the drive belt is too loose on an EZGO?
A loose drive belt can result in your EZGO Golf Cart to lose top speed and underperform. If the drive belt is the right model but it seems to be too loose then it could be because there is something stuck in the clutch or there is some damage in the clutch.
Why is my EZGO golf cart losing top speed?
A loose drive belt can result in your EZGO Golf Cart to lose top speed and underperform. If the drive belt is the right model but it seems to be too loose then it could be because there is something stuck in the clutch or there is some damage in the clutch. In this case you’ll need to call a certified technician to inspect your golf cart.
Where is the cam gear on a EZGO golf cart?
At the top of the motor you will see a knotch, and on the cam gear you will see a hole, line those up, make sure the crank keyway is straight up, and put it all back together. What should compression be on a ezgo golf cart? How much oil does a ezgo golf cart engine hold? Where are the fuses in a ezgo golf cart?
How do you put a timing belt on a EZGO golf cart?
0:551:50EZGO 350cc eh35c Timing engine - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd all you do is you spin the engine counterclockwise and it'll slowly just work its way on andMoreAnd all you do is you spin the engine counterclockwise and it'll slowly just work its way on and it's pretty easy. So then just make sure that the belts in the middle. And in the middle down here.
How do you remove the belt on a EZGO golf cart?
1:353:42ezgo gas drive belt replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's very simple you simply grasp the belt. Pull it up on pull it over spin. It over just like thatMoreIt's very simple you simply grasp the belt. Pull it up on pull it over spin. It over just like that now it's loose you can just feed it. Off.
Do golf carts have timing belts?
Timing belts are only used with overhead valve engines within the golf cart industry. The timing belt rides on several pulleys and is used to "time" the crankshaft rotation with the camshaft in the head. The camshaft ultimately controls the movement of the rocker arms and intake and exhaust valves.
How do you tighten a clutch belt on a golf cart?
There is no provision for adjusting the drive belt on a Club Car golf cart. If you find the belt loose or too tight, you have to go for a replacement belt. Choosing the right belt and ordering can pose a challenge. You will need to order a drive belt that is 1-inch shorter than your stock belt.
How do I know if my golf cart belt is bad?
0:152:00How to Check the Belts in your Gas Golf Cart | Golf Cars UnlimitedYouTubeStart of suggested clipEnd of suggested clipDown below and you don't want to press the moderate pressure on that belt you're gonna want to seeMoreDown below and you don't want to press the moderate pressure on that belt you're gonna want to see about 3/16 to 1/4 inch of deflection. There no more than that that'll be your proper.
How tight should a golf cart starter belt be?
The drive belt should not be too tight. If it's too tight it can risk wearing off faster and it's also harder to shift gears. To check if your drive belt is set just right make sure your golf cart is turned off then check the drive belt by pressing it down between the two clutches with your finger.
Why does my golf cart click but not move?
A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.
Where is the reset button on a ezgo golf cart motor?
Locate the motor Remove the panel so the electric motor is visible. Electric motors usually include reset buttons that can perform similar to circuit breakers. Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button.
How can I make my gas golf cart go faster?
How to Make Your Gas-Powdered Golf Cart Faster [Updated, 2022]1 Use A Better Golf Cart Battery.2 Increase Torque.3 Upgrade the Golf Cart Motor.4 Install a Torque Converter.5 Install a Higher-Performance Clutch.6 Tweak The Governor.7 Install A Cold Air Intake.8 Get Bigger Golf Cart Tires.More items...•
How does EZGO clutch work?
0:463:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking the revolution path smaller like dropping the chain on the back of your bike down to aMoreMaking the revolution path smaller like dropping the chain on the back of your bike down to a smaller gear causing the belt to rotate even faster.
How do you rebuild a clutch on a EZGO golf cart?
0:395:37GBoost E Z GO ClutchKit CKSDEZ19 - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this cart loosen the leaf spring bolt and slide it back so you'll have room to remove bothMoreFor this cart loosen the leaf spring bolt and slide it back so you'll have room to remove both clutches and belt. Now we can remove both bolts for the driven.
Do golf carts have transmissions?
All golf carts (much like cars) have a clutch, which is the part of the drivetrain that helps the put the power of the motor down through to the wheels/ground. Golf cart clutches are a part of the Continuously Variable Transmission (or CVT).
How do you rebuild a clutch on a EZGO golf cart?
0:395:37GBoost E Z GO ClutchKit CKSDEZ19 - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this cart loosen the leaf spring bolt and slide it back so you'll have room to remove bothMoreFor this cart loosen the leaf spring bolt and slide it back so you'll have room to remove both clutches and belt. Now we can remove both bolts for the driven.
How does a golf cart clutch work?
0:463:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.
How do you change the drive belt on a club car?
2:0011:52How to Replace your Starter Generator Belt on the 2004 Club ...YouTubeStart of suggested clipEnd of suggested clipSo you pull to the side as you on this first on the front belt you just kind of rotate it. Back.MoreSo you pull to the side as you on this first on the front belt you just kind of rotate it. Back.
Do electric golf carts have a drive belt?
Raise the golf cart engine cover, to access the drive belt inside the engine compartment. The drive belt is plainly visible. Loosen the drive belt tension bolt, with the open end wrench, on the front pulley. Slide the old drive belt off the front drive clutch pulley, and then the rear clutch pulley.
Why is my Ezgo golf cart belt so loose?
The reason your EZGO drive belt is too loose could be because it’s worn out, or you’re simply using the wrong size drive belt. In this case, need to find a replacement immediately. A loose drive belt can result in your EZGO Golf Cart to lose top speed and underperform.
Why is my EZGO drive belt so tight?
The reason your EZGO drive belt is too tight can be because you’re not using the right size drive belt. Check and make sure if you’re using the right one. A quick search online will give you the right information. It can also be too tight because the drive/driven clutch is misplaced or broken.
How to tell if golf cart drive belt is too tight?
To check if your drive belt is set just right make sure your golf cart is turned off then check the drive belt by pressing it down between the two clutches with your finger. If it deflects less than 1.5” it’s too tight.
Why is my clutch too tight?
It can also be too tight because the drive/driven clutch is misplaced or broken. A drive belt that’s too tight can damage the drive and driven clutches and can also result in the drive belt being worn out too fast. To check, whether the drive/driven clutch is misplaced or broken call a certified technician to have a look.
Why is my drive belt so loose?
If the drive belt is the right model but it seems to be too loose then it could be because there is something stuck in the clutch or there is some damage in the clutch. In this case you’ll need to call a certified technician to inspect your golf cart.
How to stop a EZYGO drive belt from slipping?
How to stop a EZYGO drive belt slipping: Make sure that you have the right drive belt. Sometimes the wrong drive belt will not be as wide as the clutch you are putting it on. This gives it an unwanted room to move back and forth when you are using the golf cart.
Can you tighten an EZGO drive belt?
You cannot tighten an EZGO drive belt. If loose, you will need to replace the drive belt. There have been various people online who’ve tried to store it in cold room temperatures hoping it would contract and become smaller but this is not recommended. Putting your drive belt at extreme temperatures can damage it.
