If they are made of steel, place one in a vise, then tighten it. If there is a plastic ferrule where the club head meets the shaft, wrap it in a wet paper towel to keep it from burning. Wearing a pair of fire-retardant gloves, heat the hosel of the club head for 30 seconds with a heat gun, then twist the shaft to remove it.
Full Answer
How do you reshaft a golf club?
How to reshaft irons. You can save labor charges by reshafting the club on your own. Choose the right shaft, uninstall the current shaft, and then follow the steps to install the new shaft. Important things to consider before reshafting an iron. The part right above the clubhead is called hosel.
Is it worth reshafting Irons?
According to most golfers, it is worth reshafting irons if your iron shaft is damaged, or if the shaft is not suitable for your swing. If your golf club’s shaft gets damaged or broken while playing golf, buying a new golf club isn’t your only course of action.
How to replace a golf shaft?
Choose the right shaft, uninstall the current shaft, and then follow the steps to install the new shaft. The part right above the clubhead is called hosel. After the hosel, there is ferrule that holds the hosel and shaft together. Check the shaft tip and make sure to measure everything properly.
How do you remove a broken shaft from a graphite shaft?
Also use a heat gun on graphite shafts, but don't run the risk of leaving some of the shaft in the hosel of the club head by twisting the shaft. If you can't remove it on the first try, keep reheating it until you can. Use sandpaper or a file to abrade the end of the steel shafts that will go into the hosels of your club heads.
Can you Reshaft a golf iron?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How do I Reshaft my irons?
HOW TO RESHAFT GOLF CLUBSSteel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. ... Measure the shaft tip. ... After the tip has been trimmed, abrade or roughen the shaft tip. ... Align the shaft graphics the way you want them by rotating the shaft.More items...
How do you Reshaft golf clubs at home?
2:3122:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heatMoreUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
Is it worth it to Reshaft golf clubs?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Is it difficult to Reshaft irons?
If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project. By the time you set up a shop with the equipment you need, you will probably be better off having someone do this for you.
How long does it take to Reshaft clubs?
It takes 24 hours to reshaft a golf driver. If you use an epoxy such as the Tour epoxy, you can get done with the reshafting process really fast and your driver will be ready to use in about half an hour.
Can you switch shafts on irons?
Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.
Can you reuse iron shafts?
Reusing graphite iron and wedge shafts. Along the lines of what fupresti said, as long as they're pulled properly you should be able to reuse a graphite shaft indefinitely.
How do you attach iron head to shaft?
1:332:35Golf Equipment : How to Install Golf Club Heads on a Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we just literally take the take the shaft. And push it into that head until that epoxy comes outMoreSo we just literally take the take the shaft. And push it into that head until that epoxy comes out the top wipe the epoxy. Clean. Then let it dry mine i use 24-hour epoxy so we let that dry for 24.
Can you put new iron heads on old shafts?
The only way to know if we can put your old fitted shaft into a new head it to pull the shaft, weight the head and test the new head with the old shaft. The head may be heavier or lighter, the hosel dimensions may be off which could cause a length issue.
How do you change a golf club shaft?
0:5210:45How to replace a golf club shaft - Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a nylon brush a wire brush wouldn't be too bad either that way you can clean out the actualMoreThis is a nylon brush a wire brush wouldn't be too bad either that way you can clean out the actual end of the golf club or the iron. Before you actually put the new shaft in you'll need a ferrule.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
Can you switch shafts on irons?
Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.
How much does it cost to Reshaft a golf club UK?
Iron RepairsReshaftTrue TemperLoft & Lie From}£4.50 } per club}Lead Tape, 1 Yard£4.00Re-fit Loose HeadFrom £8.5020 more rows
How do I change a golf club shaft?
0:5910:45How to replace a golf club shaft - Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a nylon brush a wire brush wouldn't be too bad either that way you can clean out the actualMoreThis is a nylon brush a wire brush wouldn't be too bad either that way you can clean out the actual end of the golf club or the iron. Before you actually put the new shaft in you'll need a ferrule.
How do you Reshaft a graphite iron?
1:0316:10GRAPHITE GOLF CLUB RESHAFT / SIMPLE AND INEXPENSIVEYouTubeStart of suggested clipEnd of suggested clipBasically you clamp the shaft into it and it pulls the head off nice and straight and level and itMoreBasically you clamp the shaft into it and it pulls the head off nice and straight and level and it doesn't twist it or bend it. And if you have a shaft puller.
Instructions
Remove your old shafts. If they are made of steel, place one in a vise, then tighten it. If there is a plastic ferrule where the club head meets the shaft, wrap it in a wet paper towel to keep it from burning. Wearing a pair of fire-retardant gloves, heat the hosel of the club head for 30 seconds with a heat gun, then twist the shaft to remove it.
About The Author
Bill Herrfeldt specializes in finance, sports and the needs of retiring people, and has been published in the national edition of "Erickson Tribune," the "Washington Post" and the "Arizona Republic." He graduated from the University of Louisville.
Feedback
The Firestick is a mid weight shaft with mid flight characteristics. They play true to flex of the era from which they came, which is to say they are stiff to flex compared to many modern shafts; the butt frequency for the 5 iron is 320cpm, same as Dynamic Gold.
Feedback
I know this is an older topic, but I just snagged a set of MacGregor Tourney Custom irons. They do NOT have "the 985" on them...just Tourney Custom.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Sony Open Pics from January 11, 2022 Part 1
I was able to get out to the Sony Open today to take a few pics. I guess due to Covid precautions they kept the spectators pretty far from the players. Also due to camera...
Why reshaft irons?
Reasons for Reshafting Irons. You may think that reshafting is expensive. But, there are certain situations where it is better to get the irons reshafted than buying new ones. The golf club is new, but the shaft is not working well for your playing style. Your swing has changed drastically and is now negatively effecting your game.
How much does it cost to reshaft a golf club?
Reshafting a golf club will cost you $50 to $250. This price depends on the type of shaft you choose, the labor charges, and the other fees charged by the repair company.
What is the difference between a stiff shaft and a regular shaft?
This depends on the swing speed and power of the player. Stiff shafts are for those who swing with more speed. Regular shafts are better for golfers who swing with less speed.
Why do golf clubs have stiff shafts?
For those who swing the club powerfully and with speed, they need more control over the club. That is why they tend to choose stiff shafts. Those who have a less powerful swing need to choose regular shafts to flex the hit. Heavy shafts or stiff shafts can sometimes make it difficult to gain speed.
Why are steel shafts so heavy?
Steel shafts are heavier and can be a problem for those who have hand and shoulder issues, especially among older players and women, as they tend to have less speed. That is why it can be quite effective for them to shift to graphite shafts.
Should a golf club be fitted to a person's swing?
Every person has their own way of playing, and the golf club should be fitted to each person’s playing style. In case the swing is not performing well or the ball is getting hit the wrong way, it is time to think of getting the shaft replaced.
Can you fix a golf cart on your own?
Under NO circumstances should you attempt to fix your golf cart on your own. Doing so is dangerous and could result in serious bodily harm. The information on this website has not been verified for accuracy and should only be used for general information purposes only. Use this information at your own risk.
Step 1
Carefully clamp the shaft into a GolfWorks Graphite Shaft Extractor. Warm the ferrule using a Heat Gun.
Step 2
After warming the ferrule, cut the ferrule off the shaft using a Hyde Knife.
Step 3
While wearing protective leather gloves aim the heat gun at the backside of the hosel keeping the nozzle approximately 3″ to 4″ away form the hosel. Heat on a high temperature setting for about 1 minute and then apply pressure with the wrench to remove the clubhead.
Step 4
After the head is loose, hold the head with your gloved hands while continuing to apply pressure with the wrench to remove the head completely from the shaft. Do not twist and pull the clubhead at any time, this could cause damage to the shaft.
Step 5
Using a wire brush, remove excess epoxy from the inside of the hosel. If this is done while the clubhead is still warm, it is much easier to clean. Note: Most metal wood clubheads have a plug at the bottom of the hosel.
Step 6
Measure the shaft tip with a Shaft Identification Gauge. Most iron shafts will either be a .370″ or .355″ tip size, most metalwood heads will be .335″ or .350″ tip size.
