Wash the club head with warm soapy water and then dry the club with a towel. Rub fine grade 1,500 grit sandpaper over the scratches in a back and forth motion. This will polish your club head surface, and restore it to its original condition.
How do you refinish golf clubs?
Before you embark on a time consuming and potential total refinish of your clubs, clean them thoroughly. Using a soft cloth and a light soap, gently wipe the club face and head. Using the same soap, take a soft toothbrush and clean the grooves on the face. Use your wire brush to clean the grooves on your irons and wedges.
How to fix scratches on stainless steel golf clubs?
How to Fix Scratches on Golf Clubs. This is how you fix light scratches on stainless steel golf clubs. Wash the club head with warm soapy water and then dry the club with a towel. Rub fine grade 1,500 grit sandpaper over the scratches in a back and forth motion. This will polish your club head surface, and restore it to its original condition.
How do you fix a scratched Golf Club head?
Wash the club head with warm soapy water and then dry the club with a towel. Rub fine grade 1,500 grit sandpaper over the scratches in a back and forth motion. This will polish your club head surface, and restore it to its original condition.
How to make golf clubs look newer?
If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up. This can be a good place to start for most clubs. With a simple mixture of soap and water, you do not need to worry about damaging the club. After a brief soak, use a small brush like a toothbrush to try and remove any rust.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
How do I restore my wedge face?
0:006:59Golf Wedge Restoration - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep one is to pull the head. Two main methods for pulling. Ahead heat gun torch and typically you'MoreStep one is to pull the head. Two main methods for pulling. Ahead heat gun torch and typically you're going to use a shaft puller but for all of you at home who don't actually have a shaft puller.
Can you reface golf clubs?
If a standard cleaning won't do, a golf club refinishing can help return your clubs closer to their original, polished state. “It can also touch up those little nicks and dings that occur during a round,” DICK'S Sporting Goods Associate Nick Jendrejeski says.
How do you make old irons look new?
5:0124:18how to refurbish an old golf club 2020 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's done on an unstitched buffing wheel with that yellow polishing comp with the yellow polishingMoreThat's done on an unstitched buffing wheel with that yellow polishing comp with the yellow polishing compound right this guy.
Can you resurface a golf wedge?
Refurbishment involves removing scratches, dents and dings from the wedge head, sole, paint fill, and resharpening the grooves, either original or deep per the player's wishes. Not every wedge can be restored, as sometimes the damage is just too much to repair.
How do you fix a golf club face?
2:0514:23LOOSE GOLF CLUB HEAD / How To Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipAhead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them backMoreAhead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them back together wipe it clean let it dry.
Can you Regroove clubs?
1:012:52How to Regroove your Irons with the 6 Head Groove Sharpener - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd over time you can apply more pressure it's okay to go back and forth the conventional wisdom isMoreAnd over time you can apply more pressure it's okay to go back and forth the conventional wisdom is to go just draw it backwards but it really doesn't matter work your way up.
Can you use metal polish on golf clubs?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.
Can you recondition golf irons?
Once your club is clean, you may want to give it a fresh new finish. Professional club finishing can be expensive. You can expect to pay around $50 per club to get them professionally refinished. This can be a fun way to bring life back into a beloved or special set.
Can golf irons be refinished?
Founded by Jim Kronus, The Iron Factory began as the first and only golf club iron refinisher in the United States. Since then, we have perfected the process of repairing, rebuilding, and refinishing over a million clubs for both professional and amateur golfers.
How do I clean my golf iron face?
0:211:53How to Clean and Store Your Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your first Club. And dunk the head in the bucket of water for a few seconds remove. It and wipeMoreTake your first Club. And dunk the head in the bucket of water for a few seconds remove. It and wipe it off with the towel. Make sure all the debris has been removed from the grooves cleaning.
How to clean rust off golf clubs?
A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
What to put on golf clubs to prevent rusting?
Wax. This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.
Can a Cobra wedge rust?
Cobra Trusty Rusty Wedge. Leaving you’re club outside or even storing it in unfavorable conditions can result in rust. Contrary to popular belief, a little rust is not the end of the world. For some used clubs, especially wedges, some rust may even be beneficial. Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase ...
Can steel wool be used on golf clubs?
Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.
Does rust on a golf wedge increase spin?
Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
What is refinishing irons?
Refinishing Irons. The refurbishing process changes depending on your irons. If you play chrome-forged, carbon steel irons, you may want to rechrome them to bring back the luster of their original state. Most refurbishment jobs target performance, by repairing nicks, scratches and dents. Rechroming.
How to paint a driver's sole?
Focus your efforts to the sole and the crown. Begin painting. Begin with the crown, find a color match for the crown, then slowly apply smooth strokes with your paintbrush.
Can you use steel wool on a driver?
Warning: Never use steel wool on your driver and fairway wood club heads. It will scratch the crown and face, and be sure to dry the head completely to avoid oxidation. Steel wool bristle club cleaners are great at getting dirt and sand out of iron grooves, but never clean your driver with them. Let the club dry.
Is refurbishing a club difficult?
Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs. Refurbishing is a difficult process. Many professional services are available around the country if you don't want to risk damaging your clubs.
What is golf club refinishing?
Refinishing clubs can help give them new life. When it comes to a golfer and a set of clubs usually that golfer is very attached to them, sort of like a newborn baby is close to a blanket or similar to a teenage couple being emotionally involved with each other on a different level.
What tools are needed to refinish golf clubs?
A small Philips-head screwdriver, a shallow pin, a small natural-bristle brush and an artist’s brush are all the tools needed to complete the process.
How long does it take to refinish a golf club?
Refinishing a set of golf clubs is very simple, it takes only a few days, and it is well worth the effort. After it’s completed one time or two it will become even easier to accomplish the next time and the time after that. All golfers know the two most important factors when on the golf course are to place a great score on the score card and to look stylish while giving your friends and/or opponents a nice, friendly smackdown on the course after 18 or more.
What to do with holes in wood for golf clubs?
If there are holes or dings in the wood, fill them with epoxy filler only . If wood or steel fillers are used, it can change the dynamics of the club's weight and swing capabilities. After that, the refinishing process is complete, and the clubs will almost appear as if they were just purchased.
What are the two most important factors when on the golf course?
All golfers know the two most important factors when on the golf course are to place a great score on the score card and to look stylish while giving your friends and/or opponents a nice, friendly smackdown on the course after 18 or more . Sorry, the video player failed to load.
Is a golfer attached to a set of clubs?
Overview. When it comes to a golfer and a set of clubs usually that golfer is very attached to them, sort of like a newborn baby is close to a blanket or similar to a teenage couple being emotionally involved with each other on a different level. A golfer never wants to part with a quality older set of clubs, especially if they normally work well ...
How to get scratches out of golf clubs?
To remove deep scratches, try using a buffing compound on a soft toothbrush. Rub the brush against your club in a forward and backward motion . This is the safest method and it shouldn’t ruin your club.
How to clean a golf club with a light compound?
Always choose the light version, as heavier compounds can damage your clubs coat. Clean your club with a damp microfiber cloth. Then allow club to air dry. Pour a small amount of rubbing compound on to a clean cloth. Start rubbing the cloth on to the sky mark. Use a circular motion when cleaning your club head.
What causes scratches on golf balls?
After all, you’re smacking a metal stick against a solid golf ball. Light marks is the most common type of damage you’ll come across, and the easiest to remove. The small and often fine scratches are caused by everyday play. Chipping and fairway shots are the most often culprits.
What does it feel like to have a new golf club unwrapped?
The feeling of a new unwrapped golf club is intoxicating. It’s nice seeing the irons surface and sun combine into one shimmering beauty. However it doesn’t take long for the shine to wear off. The truth is scratches, sky marks and scuff marks on golf clubs are a reality for all golfers. While some golfers wear these marks as badge of honor, ...
Why are there sky marks on my golf clubs?
Aside from the embarrassment, sky marks are quite ugly to look at many players tend to clean them. To avoid causing sky marks on your clubs , don’t tee off too high.
What does it mean when you hit the ball with the top of your club head?
When you hit the ball with the top of the club head, white markings known as sky marks may appear. To some golfers these sky marks are embarrassing and are a mark of an unsuccessful swing at the ball.
How long does it take for paint to dry on a golf club?
Using a fine paint brush, paint over the sky mark in a back and forth motion. Allow up to 4 hours for the paint to completely dry.
What is refinishing golf clubs?
Refinishing golf clubs is a fairly simple process that will give you an opportunity to try new things with old clubs. Whether you want a new look on your putter head or a different flex on your shaft, refinishing clubs at home is a great way to try out new technology.
How to twist a clubhead off?
Once the epoxy begins to break down, you can twist most clubheads off by hand. When the shaft is removed, clean out the hosel, then apply epoxy to the new shaft and the interior of the hosel. Insert the shaft into the hosel and let dry overnight.
How long does it take for a golf club to dry?
If you will be refinishing multiple clubs, the process might take several days--clubs need to dry for about 12 hours at different stages of the process.
