How do you remove a ferrule from a golf club?
Take the small strip of cotton and soak it in some water and then wrap it around the ferrule. The club shield paste and wet cotton strip will protect the ferrule from heating up and getting damaged. Position the shaft extractor firmly against the washers to start just as you would to the head of a club for typical removal.
How do you remove epoxy from a golf shaft?
Position the shaft extractor firmly against the washers to start just as you would to the head of a club for typical removal. Apply heat to soften the epoxy and slowly apply pressure to the washers as you would when removing a club head (patience is the key for success). Slowly continue repeating this process.
Should I buy another adjustable tip for my Shaft?
Buying another adjustable tip is the best plan of action for golfers who want to try a new shaft, because it will allow them to compare the results of the shafts quickly and easily. But they’re not as cheap as many golfers might think — most OEM adjustable tips sell for between $25 and $40 each.
Can you reuse a shaft adapter?
One would be to reuse the existing adapter and the other is purchasing a new adapter sleeve and starting fresh. There are good reasons for either choice. If you do decide on using the original OEM adapter, then that will save money.
How do you remove a golf club tip?
2:288:18Golf Club Repair - Removing a Golf Tip Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's nothing more than a washer with a hole in the middle of it and a series of set screws that areMoreIt's nothing more than a washer with a hole in the middle of it and a series of set screws that are color-coded for different size threads for different sized clubs.
How do you remove an adjustable tip from a golf shaft?
0:119:32How to Remove Golf Shaft Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you start to see it's a bubble up a little bit just take your hook blade. Slide it right underMoreOnce you start to see it's a bubble up a little bit just take your hook blade. Slide it right under there. And it should come off free easy a little cold out here in the shop tonight.
How do you disassemble a golf club?
0:564:28How To Remove A Graphite Shaft From A Golf Club - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo as I'm going to heat this up for about 20 seconds. Now if I can't pull it off in the first 20MoreSo as I'm going to heat this up for about 20 seconds. Now if I can't pull it off in the first 20 seconds I'm going to go back and hit it with five more seconds retry until the club head comes off.
How do you save a ferrule?
8:329:36Club repair / saving original ferrules! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what I'll do is just heat the hosel a little bit not a lot. And just run it across the ferruleMoreAnd what I'll do is just heat the hosel a little bit not a lot. And just run it across the ferrule couple times and then heat the other end of the shaft. And that will enable you to release.
Can you reuse iron ferrules?
Can You Reuse Old Ferrules? If you manage to get used ferrules off without damaging or cutting them, then yes, you can reuse them. Depending on what was used to install them, it can be really easy or almost impossible to get them off undamaged.
How do you remove a shaft sleeve?
0:251:31Shaft Sleeve Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you'll do is you'll take a couple hammers put one on the bottom and one on the top. And you'llMoreSo you'll do is you'll take a couple hammers put one on the bottom and one on the top. And you'll just beat on the sleeve. And you'll turn it. And keep doing it until it pins it out and then loosens.
How do you change a shaft tip?
7:3317:13How To remove / Install a Golf shaft Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you would push it off that way or pull it pull the shaft out which however you have yourMoreAnd then you would push it off that way or pull it pull the shaft out which however you have your shaft puller works again if you're looking for something like this will be in the show notes.
How do you install a shaft adapter sleeve?
3:1712:20Installing a Shaft Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we have a nice connection when we actually do apply the epoxy. So the first thing I want to do isMoreSo we have a nice connection when we actually do apply the epoxy. So the first thing I want to do is check the depth of the adapter as it goes on to the tip of the shaft.
How do you repair a golf club hosel?
5:168:52LOOSE FERRULE / The EASIEST Golf Club Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the recommended way the best way to do this is to get some golf epoxy or some two-part epoxyMoreNow the recommended way the best way to do this is to get some golf epoxy or some two-part epoxy really it doesn't have to be golf. Specific it can be any two-part epoxy.
What are ferrules on golf clubs?
First of all, the golf ferrule is the black piece located just above the club head's hosel. The purpose of a ferrule is to provide a smooth transition from the top of the hosel into the shaft. For the most part it is to provide a nice cosmetic element to the golf club.
How do you remove a steel shaft from a hosel?
0:383:38How to Remove a Steel Shaft Broken Off at the Hosel - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use either number four which it fits in fairly deep. Or a number five screw extractor whichMoreYou can use either number four which it fits in fairly deep. Or a number five screw extractor which will go in about a half an inch.
SST Pure: A deep dive into the technology
Due to the manufacturing process, all golf shafts contain irregularities in straightness, stiffness, and roundness. And depending on how a shaft is aligned, the inconsistencies can adversely affect a shaft’s performance and consistency.
Caddie Corner: 20 questions with PGA Tour caddie Derell Aton (caddie for D.A. Points)
In this new GolfWRX feature, called the “Caddie Corner,” we’ll be firing off questions to a different caddie every week on the PGA Tour.
Adams: Straight answers about equipment costs
While reading comments from previous articles, the cost of equipment was often mentioned as a reason folks were not enamored with the game. The “$400” driver came up several times. Before I get into more depth I’d like to issue a disclaimer, or maybe it’s a claimer, not sure.
2022 Waste Management Phoenix Open: Best prop bets
The PGA Tour heads to TPC Scottsdale this week, with a raucous crowd ready to greet a whole host of huge names that are looking to get their hands on the trophy in the desert.