The reaction between the iron of the ferrous alloy and the hot black oxide bath produces a magnetite (Fe3 O4) on the surface of the putter. To protect and seal the beautiful Black OX finish the putter is then dipped in a “dry to the touch” oil bath. Carbon putters will still need to be maintained by oiling the putter after each round of golf.
How do you seal a black oxide finish?
Apply the sealant recommended by the black oxide finish manufacturer. The traditional finish for black oxide is a penetrating oil-based sealer, and is applied by dipping the part in the oil sealer and wiping off the excess with a lint-free cloth. If you prefer a dry finish, check the manufacturer's recommendations for non-oil sealer options.
How do I remove metal from a black oxide mixture?
Remove the metal piece from the black oxide mixture at the end of the recommended time. Follow the black oxide manufacturer's timing recommendation carefully, and do not allow the metal piece to remain in the mixture longer than recommended. Typically, the metal piece should remain in the black oxide mixture from three to ten minutes.
Can you use black oxide on stainless steel?
If you want to make a black oxide finish yourself, the cold-process black oxide system is a safe alternative. This is great for crafters who use iron alloys like stainless steel to make sculptures, statues, furniture, kitchenware, or decorative household items like candle holders and wine racks.
How long should the metal piece remain in the black oxide?
Typically, the metal piece should remain in the black oxide mixture from three to ten minutes. Rinse the metal piece with clean water and dry it with a lint-free cloth.
How do I make my golf club heads black?
1:344:56HOW TO MAKE YOUR GOLF CLUBS LOOK RAW - YouTubeYouTubeStart of suggested clipEnd of suggested clipDramatic purposes we'll use this big ol tub. Not like I really care to have a big jug of whiteMoreDramatic purposes we'll use this big ol tub. Not like I really care to have a big jug of white vinegar laying around and we're gonna let it soak for 48. Hours that's a long time.
How do you refinish a golf iron?
1:2412:33How to restore the chrome finish on a set of golf club irons - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter they've been wired up on copper wires or hooks in this case then we put them in a tank ofMoreAfter they've been wired up on copper wires or hooks in this case then we put them in a tank of sulfuric acid and some other things. And we reverse the process and we're actually plating the plant.
How do you stain golf clubs?
Wipe the head of the club gently with fine steel wool to remove the excess old paint. Apply the desired stain to the wood of the club head with your 1-inch paint brush. Allow the club to dry for one to two days so that the stain has time to set. Wipe down the club and apply the varnish or lacquer of your choice.
How do you finish a black putter?
0:1510:51How to do a Black Oxide Finish on a Scotty Cameron Golf Putter - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst what we're gonna have to do is submerse the putter in a 50/50 muriatic acid solution.MoreFirst what we're gonna have to do is submerse the putter in a 50/50 muriatic acid solution.
How do you refinish black oxide golf clubs?
How To Refinish Golf Clubs Black OxideRemove Old Finish. Golf clubs can be refinished in a variety of ways to give them a new lease on life. ... Sand And Polish With A Fine Gauge Sandpaper. ... Apply A High-Quality Polyurethane. ... Buff With A Clean, Soft Cloth.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
What is the black finish on golf clubs?
Miura Golf, however, has developed a new black finish using a technique called “QPQ,” or quench-polish-quench. This specialized process helps mitigate wear and corrosion, keeping those black finishes looking clean and stealthy, even for golfers who play and practice frequently.
Can you paint golf irons Black?
Yes. You can easily repaint your golf club heads at home. First, you will have to remove any existing paint from the heads. You can apply a paint remover and let it soak for a few hours before removing the old paint with a sharp object.
How do you make irons look new?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.