Golf-FAQ.com

how to setup to hit a golf driver

by Bianka Ryan DDS Published 3 years ago Updated 3 years ago
image

  1. Set your stance wider than your shoulders. Stand straight with your feet out slightly wider than your shoulders.
  2. Line the ball up with the inside of your dominant foot in front of you. Many beginners tend to place the ball exactly in the middle.
  3. Grip the club like a baseball bat with your dominant hand in front. ...
  4. Hold the driver 10–12 inches (25–30 cm) away from your body. ...
  5. Tee the ball up high with a 2.75 inches (7.0 cm) tee. Use a standard 2.75 inches (7.0 cm) tee and barely stick it in the ground.

Part of a video titled Set up and tee height for golf driver (crucial tip) - YouTube
1:01
8:42
Inside the left heel from looking on in this line here just inside the left heel. And then takingMoreInside the left heel from looking on in this line here just inside the left heel. And then taking the right stance wide enough to support my shoulder frame.

What is the proper way to hit a golf driver?

Part 2 Part 2 of 3: Getting into Position

  1. Align your body with a vertical marker in the distance. ...
  2. Set your feet in the proper position. Because a golf swing has both a horizontal and vertical feature, the center of your swing will be a couple inches on ...
  3. Adjust your arms. You want your arms to be straight and form a “V” shape when you set up your stance.
  4. Use the proper grip pressure. ...

How to hit the golf ball straight with a driver?

Tips for Hitting a Ball Straight Every Time

  • The Best Swing Speed for Straight Shots. First, let’s clear up one common misconception. ...
  • Hitting Straight Golf Shots Off the Tee. Here’s another super simple trick that helps you get more control over your golf swing. ...
  • Adjust Your Golf Stance to Fix the Slice. ...
  • Three Changes to Make on the Golf Course. ...

How far should I hit my driver in golf?

How far should you hit a 7 iron? Based on a 7-iron swing speed of 90 mph (Average speed of all Tour Pros in 2019), you can hit a 7 iron for 172 yards of carry. Total distance would depend on the landscape you are hitting into such as fairway, firm green, soft green, and the degree of spin placed on the ball.

How do you swing a golf driver?

Should golfers always try to swing as hard as they can with their driver?

  1. Grip, Clubface, Then Speed. Joe Plecker, The Landings Club: Smashing drives requires speed and a square clubface. ...
  2. Learn Controlled Speed. Jonathan Yarwood, International Junior Golf Academy: When you watch Bryson smash it into infinity and beyond in person, it really is incredible to watch.
  3. Get Flexible First. ...
  4. Faster, Not Harder. ...

image

How do I hit my golf driver better?

3:506:03How To Hit Better Drives In 5 Minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart with correcting attack angle. Then add some width and height to your golf swing specifically.MoreStart with correcting attack angle. Then add some width and height to your golf swing specifically. In your backswing. To create a better blow at the golf ball. And when it comes to hitting driver.

How do you hit a golf driver for beginners?

1:395:38How to Hit Driver for Beginners (Beginner Golf Tips) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I like to say about shoulder width apart typically all right now the next thing that you want toMoreSo I like to say about shoulder width apart typically all right now the next thing that you want to know is that when you hit the ball. You're gonna actually be hitting slightly up on the ball of it.

Why do I struggle hitting my driver?

The main reason why you can't hit your golf drive anymore is because your gripping the shaft too tight, not having enough swing speed, or your using the wrong golf club. There are many possible reasons why you can't hit your driver as well as you did before. You may be: Holding your driver with a grip that's too tight.

How do you hit a driver solid every time?

8:5415:27Top Golf Tips for Hitting Your Driver Solid Every Time! - YouTubeYouTubeStart of suggested clipEnd of suggested clipDo this turn that down turn this screw you loosening the screw with the club as you rotate likeMoreDo this turn that down turn this screw you loosening the screw with the club as you rotate like every other shot and I want to pull my left hand into my left pocket.

How to get more lift in golf?

Bring the driver back down at the ball and shift your center of gravity to your front foot as you make contact. Use a sweeping motion, instead of a downward angle, to give the ball more lift and less spin.

How far away should you hold a golf driver?

Hold the driver 10–12 inches (25–30 cm) away from your body. Hold the handle of the club so that the butt end is about 10–12 inches (25–30 cm) away from your belt buckle. Back away from the ball until you create enough space to hold the driver at this distance.

How to get a driver to stop backswinging?

Stay balanced, go slow, and spend time at the top of your backswing. Keep your center of gravity in the middle as you start your backswing. Slowly pull the driver back and up above your head. Pause at the top of your backswing for just a fraction of a second before you bring it back down towards the ball.

What is the most intimidating part of golf?

Driving can be the most intimidating part of golfing for beginners. It's the first shot on any hole, so it's important to get it right! Make sure to position yourself and the ball correctly, then use proper balance and technique as you swing to hit the ball. Avoid typical mistakes that beginners make, like trying to hit ...

What is a wide stance golf club?

A wide stance will allow you to have a longer swing when you drive. In general, longer clubs need wider stances, while shorter clubs need narrower stances. For example, you would use a very narrow stance for a short wedge club. ...

Why do you need to set the ball forward in your stance?

You need to set the ball more forward in your stance, since the driver is a long club, to allow the driver to square up with it. This also means that the driver will hit the ball on the upswing, which creates less spin and straighter drives.

Why do you pause at the top of the car?

The “pause” at the top is really just a slight hesitation that will allow your body to adjust and align the driver for the downswing.

What happens if you don't make a compensation in a downswing?

If you didn't make this compensation, you would put a sky mark on your driver!

Is power important in golf?

Yes, power is important, but there's no point in hitting the driver far if you hit it all over the place. If you want to score in golf, you have to know exactly where that ball is going to land after you hit it.

What happens when you hit your driver?

When you hit your driver, you hit the ball off the tee, essentially hitting it in the air. For your iron shots, you hit the golf ball off the ground. You can even look at your driver and iron and see that these are wildly different clubs designed to fulfill different purposes. And yet, I’ve seen so many golfers use the exact same setup ...

How to adjust your aim in golf?

Second, lift your lead shoulder slightly higher than your trail shoulder and tilt your torso away from the target. Third, check the position of your head to make sure it’s a little behind the ball. Now, without changing the shape of your posture, check to see if you need to adjust your aim .

What does posture do in golf?

The right golf stance and posture help you hit up on the ball, achieve a wider range of mobility, and even fix that horrifying golf slice.

Why is hand position important in golf?

But proper hand position is actually pretty important for your driver setup. The right hand position and grip strength help you make solid contact and ensure face control.

Why do you put a square face on a golf club?

Generally speaking, you want to deliver a square club face to the golf ball at impact. A square face helps prevent a slice and keeps you from hooking your driver. Fortunately, it’s pretty easy to make sure your club face is square in your driver setup.

How far to aim a golf ball if you are left handed?

When you take your driver setup, pull your right foot slightly back from the ball so the line of your toes aims about 8-10 yards to the right of the target. Check your shoulders and hips to make sure they also aim to the right.

When hitting your irons, do you want to make contact with the ball?

When you hit your irons, you want to make contact with the ball on a descending motion. But with your driver, you want to make contact as the club head is arcing back upward. This means you need to hit the low point of your golf swing before the moment of impact.

Step 1. Initial setup and tee height

The setup covers everything before you take the shot. This includes your stance, the ball position, body tilt, your distance from the ball, and the tee height.

Step 2. Driver Backswing

The backswing is one of the most critical aspects of hitting a driver and adding more distance to your shot. The goal is to have a backswing with an upward arc and generate enough power to propel the ball as far as possible.

Step 3. Driver Downswing

The key to having a perfect driver downswing is to keep your upper body behind the ball at all times, especially at the point of contact between the club and the ball. We’ll continue from where we left on the backswing.

Step 4. Driver Follow-through

The follow-through is one of the most underrated aspects of hitting the driver, however, it is equally important as others. The follow-through is vital for maximizing the distance and controlling the shot’s direction.

When you hit your driver, do you hit the ball up?

This means you want to make contact with the ball just after the low point of your swing, when the clubhead is traveling upward. We tee the golf ball up for this exact reason. This is also why the ideal driver ball position is always more forward in your stance.

What is a good driver setup?

Generally speaking, a great driver setup accomplishes two things. It helps you hit up on the ball. A good setup also directs your swing path to compensate for the reversal in path direction after the low point of your swing. Now, here’s how to draw with your driver from the standpoint of setup.

How to get a clubhead on a golf ball?

First, feel your hands work in as the clubhead stays on that line between the ball and your hip. This helps you get the clubhead slightly outside your hands, which pays off big in the transition. Second, make sure your clubhead is nice and square.

What happens when you hit a golf ball?

Hitting up on the golf ball causes the clubhead to travel in and up at the moment of impact. This is the opposite of what happens when you hit down on the ball. So if you want to know how to draw with your driver, you need to account for this difference. Here’s how:

How to measure golf club tilt?

If you’re not sure how far back to tilt, here’s a really easy way to measure it: Hold your golf club against your body with the handle running vertically up your chest. Bend your knees slightly as you usually would at setup. Tilt your torso away from the target until the clubhead hits your lead knee or thigh.

Why does the club head travel outside the hands?

So, if you carried the clubhead outside your hands, your clubhead will naturally travel from the inside in the transition. This helps you hit up on the ball and creates that shoulder drop.

What happens if you don't hit consistent driver shots?

If you’re not hitting consistent draws on those driver shots, you’re losing valuable distance. A nice, high draw off the tee is one of the best (and most satisfying) ways to minimize the number of strokes between you and the cup. And the good news is, it’s actually not that difficult to achieve that kind of shot.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9