Golf-FAQ.com

how to sew golf club covers

by Kevin Roberts Published 2 years ago Updated 2 years ago
image

How to Sew Golf Head Covers

  • Step 1. Measure 1 inch down from the elastic cuff of the black sock. Cut straight across the flattened sock on the...
  • Step 2. Pin together two fabric rectangles with the 8-inch edges together, right sides of the fabric touching.
  • Step 3. Unfold the two sets of sewn-together rectangles, and place one sewn set on top of the other sewn set, with...

Part of a video titled DIY Golf Club Headcovers Sewing Tutorial With Pattern
2:19
7:44
Under digital downloads the first thing you're going to do is cut out your paper pattern there'sMoreUnder digital downloads the first thing you're going to do is cut out your paper pattern there's going to be a back pattern piece a front pattern. Piece a rectangle rib knit square.

Full Answer

How to make a custom golf club head cover?

How to Sew Golf Head Covers Step 1. Measure 1 inch down from the elastic cuff of the black sock. Cut straight across the flattened sock on the... Step 2. Pin together two fabric rectangles with the 8-inch edges together, right sides of the fabric touching. Step 3. Unfold the two sets of ...

How do you hide the yarn on a golf club?

Dec 10, 2013 - If you're inclined to write off golf club covers as unnecessary novelty items, consider the value of your entire set of clubs. Most sets cost hundreds or thousands of dollars, …

What do you need to make a Christmas Club cover?

Jun 20, 2010 · Amy from Positively Splendid shows how to make a set of vinyl golf club headcovers for Dad. It’s a bit late to get them started as a Father’s Day gift, but there’s no …

How do you make a golf head cover out of socks?

Nov 20, 2009 · Pin all of it together and sew around the top. I did about a half inch seam just to make sure I got all the different layers. Once you've sewn that it's finished, and you have …

image

What are golf head covers made out of?

Knit headcovers bring throwback styling to any golf bag. Stitch knits are made with what the company calls Techno Wool—an extra-durable acrylic material with water-resistant properties that is sure to retain its shape pull after pull. They also come in several fun colors and patterns to add some color to your game.Mar 29, 2021

How do you make a golf club cover out of a sock?

Glue the cut end of each tube sock to the inside of the hole cut in the bottom of each stuffed animal. It's best to do this a little at a time. Apply a short line of fabric glue along the cut edge of the sock; then press the glue against the inside of the stuffed animal just above the hole you cut.

How do you make a golf club cover out of a stuffed animal?

  1. ​Step 1: Determine where you want the club to enter on the toy and cut along a seam.
  2. STEP 2: Cut the sock along a stitch line in the mid foot or end near the toe.
  3. STEP 3: Ready the sock.
  4. STEP 4: Stitch the sock to the stuffed animal.
  5. STEP 5: Replace the stuffing (use trial and error)
Feb 11, 2015

Can you use a sock as a headcover?

With a tube sock, you can cleanly and easily attach the sock to the head cover, and it will do a great job of protecting the golf shaft. These socks are usually very inexpensive, and you can even use some old (clean) ones that you have lying around.

How do you make a club cover?

Part of a video titled DIY Golf Club Headcovers Sewing Tutorial With Pattern | Sew Anastasia
2:19
7:44
Piece a rectangle rib knit square. And this is for the side of your golf club cover next you'reMorePiece a rectangle rib knit square. And this is for the side of your golf club cover next you're going to cut out your fabric.

Can you use a sock as a golf club cover?

Keep your clubs looking and performing as new. Compared to short head covers, long neck head covers in addition to protect the golf head, still can protect the shaft, especially the graphite shaft. Simply make sure you put the sock into the bag after putting them on clubs.May 30, 2018

How to make a slipknot?

1. Make a slipknot. Loop the yarn around your finger twice. Then, pull the first loop through the second loop to create the slipknot. Slide the slipknot onto the first double pointed knitting needle and tighten the slipknot by tugging on the tail of the knot.

How to knit a round?

Knit the first round. Insert the right hand needle into the first stitch on your first double pointed needle. Then, loop the yarn over the tip of the needle and pull this new loop through the cast on stitch. Continue to knit all of the stitches in the round.

How to change colors in knitting?

To change colors, wait until you are about to start a new round. Then, tie the new strand of yarn to the old strand of yarn as close to the stitch as possible. Grasp the new strand of yarn and use it to knit the next round and as many rounds after that as you want.

How to increase round in knitting?

Start the increase round by knitting 1. Knit the first stitch as usual by inserting the tip of the right hand needle into the first stitch on the end of the first double pointed needle. Then, yarn over and pull through the stitch to create a new stitch.

How to knit a round stitch?

Knit the first stitch as usual by inserting the tip of the right hand needle into the first stitch on the end of the first double pointed needle. Then, yarn over and pull through the stitch to create a new stitch. Knit all of the odd stitches in the round in the same way. ...

Step 1: Needed Supplies

Not having a sewing machine at my disposal, I had to do things the old fashioned way.#N#You will need:#N#Favorite Stuffed Animal (big enough for the club you want to cover)#N#Sock (preferably new)#N#Scissors#N#Needle and Thread (or sewing machine)

Step 2: Prepare the Subject

Figure out the best location for the opening for the club head. On my patient I felt it best to make entry into the belly. Make an incision just a little bigger than the golf club head you plan to use it on. Remove the stuffing in order to make the animal small. You will be folding the sock down over the animal and it must be small enough to fit.

Step 3: The Hard Part

This step can be a little confusing. You have to make sure that you fold the sock correctly to ensure that when you are done the outside of the sock is on the outside. I describe two methods so you'll better understand how it should be.#N#When you're done, the foot of the sock will be inside the belly of the animal and the calf hanging out.

Step 4: Sew Sew Sew

Make sure the sock is in the position you want, animal stuffed inside so the opening in the belly meets up with the sock just above the ankle. Sew the two together, making sure you sew around the entire opening paying special attention to areas of the animal that were already sewn or may fray.

Step 5: Replace the Guts, Finish the Job

Unfold the sock from around the animal. Stuff the filling back into the animal. Make sure you refill the head or toes or tail of the animal if applicable. Do not put all of the stuffing back in. You want to leave enough room for the club head. After replacing the stuffing, sew the toe end of the sock shut so the stuffing will not come back out.

Friday, November 20, 2009

My husband loves golf, and he is a big University of Utah fan. So for our anniversary I thought what better gift to give him that something that has to do with two things he loves! So I took one of the covers that came with his clubs and I got s ome Utah fleece from Hobby Lobby.

Homemade Golf Club Covers

My husband loves golf, and he is a big University of Utah fan. So for our anniversary I thought what better gift to give him that something that has to do with two things he loves! So I took one of the covers that came with his clubs and I got s ome Utah fleece from Hobby Lobby.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9