how to shorten a golf club

by Prof. Everett Ruecker Sr. Published 2 years ago Updated 1 year ago

^{How to Shorten Golf Clubs}

Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.
Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ...
Wrap masking tape around the area of the shaft that will be cut. The tape will keep the end of the shaft from splintering as you cut.
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual.
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight.
Insert the pointed end of a golf tee into the hole at the end of the new grip. ...
Place the grip over the end of the shaft and push it down before the solvent dries. ...

How do you extend the length of a golf club?

This includes:

The various types of clubs and the ideal length that each should come with.
A step by step process of determining the perfect length of your club.
Assessing and understanding your handicap
Defining your swing speed
Determining the right flex for your clubs
Getting the right clubs for your loft

How do they lengthen golf clubs?

What-If Standard Sized Irons Are Not Fit for You

Method 1. It is the method that is the most used by the golfers. ...
Method 2. ...
Method 3: Long Drivers of America Method (LDA) The club length is also measured by the Long Drivers of America (LDA) method. ...
Method 4: Using Measuring Instruments. ...
Method 5: The United States Golf Association (USGA) Method. ...

How to change the grips on a golf club?

Part 3 Part 3 of 3: Applying the New Grip

Tape the same area with double-sided tape. Peel off the backing of the second side. ...
Apply grip solvent liberally all over the new tape. Try to cover the entire surface area.
Take your new grip and pour grip solvent into it. ...
Slide the new grip onto the shaft. ...
Align the grip how you want it before the glue on the inside of the grip has a chance to set. ...

More items...

How to fit yourself for a golf club?

It starts with length. The right length puts you in an athletic position and gives you the ability to make a repeatable swing.
Next is the lie angle. Lie helps the club move through the turf for more consistent results, as well as helping counter your misses.
Then you’ll want to select your shaft and flex. ...
Finally, you’ll select your grip. ...

Can I shorten my own golf clubs?

If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.

How much can you shorten a golf club?

Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.

How do you cut down a golf club shaft?

0:394:01How to Cut Golf Shaft DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for the first step you have to remove your old grip. I find the easiest way to do this is toMoreSo for the first step you have to remove your old grip. I find the easiest way to do this is to literally just cut a line all the way down your club.

How do you adjust the height of a golf club?

0:091:46DIY How to Change a Golf Club's Length : Golf Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay if we're talking about changing a golf club's length. What you want to do is get get in touchMoreOkay if we're talking about changing a golf club's length. What you want to do is get get in touch find a good club repair shop or a good club fitter.

Is it bad to shorten golf clubs?

For most golfers, having clubs that are too short will be better than if they're too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You'll also have the tendency to push the ball a lot.

How long should your golf clubs be for your height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

How do you change length of golf clubs?

To avoid cutting the shaft or adding an attachment, purchase a new shaft at your desired length. Cut the ferrule and remove the clubhead from the old shaft as you did before trimming the tip. If you wish to keep the original grip, use an air compressor to separate it from the old shaft, then pull the grip off.

Should I shorten my long irons?

A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.

How do you know if your golf clubs are too long?

Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.

What happens if your clubs are too long?

5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.

What happens if I shorten my driver shaft?

Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.

Does club length matter in golf?

When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect.

Does shortening a golf shaft make it stiffer?

A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.

Should I shorten my 4 iron?

Who should use shorter irons?

Golfers who are shorter than 5'7” and tend to have a shorter wrist-to-floor length likely need to shorten their irons. The decision to shorten golf irons typically comes down to the height of the player.

Should I shorten my wedges?

Just remember a few rules when you're tackling wedge lengths for your own game. In general, a longer club will fly farther and higher, but you'll have less control. A shorter club, on the other hand, will be more difficult to produce speed and height, but it will provide more control.

How long does it take to shorten a golf club?

Believe it or not, you can adjust them yourself, without going to a professional. These relatively easy steps will help you shorten a golf club in 45 minutes or less! Steps.

How to cut a golf club length?

1. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off. This distance should be taken from the top of the club. Mark the length. Use a permanent marker to mark where the cut should be made.

How to lubricate a golf grip?

Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.

How to install grip tape on a golf cart?

1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.

How to get sticky glue off of a golf grip?

Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.

How to dispose of a golf club grip?

Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.

How to smooth out a metal shaft?

Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft. It will be sharp, and you do not want to rip the new grip that you will put on later.

How to shorten a golf club?

How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.

How to keep golf club from moving?

Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.

How to wrap a golf club grip?

Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.

Why is the shaft narrower at the head end of a golf club?

The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.

How to cut a club shaft with a rotary tool?

Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.

How to dry golf grips?

Place the grip over the end of the shaft and push it down before the solvent dries. Inspect the fit of the grip and press out any uneven spots with your fingers. Allow the grip to dry overnight before using the club.

What does shortening the shaft do to a golf club?

Shortening the shaft can make the golf club less flexible.

How to cut a club in a vise?

Align your cut mark with the blade of the saw and secure the club in the vise. Put your safety goggles on and hold the club so it will not fall as you cut.

How much off will change the flex of the golf club?

Taking 2 inches off will change the flex of the club.

How many swingweight points do you lose when you remove 1/2 inch?

For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.

Measuring Your Golf Clubs

The easiest way to tell whether your golf clubs are too long is to measure them.

When Would You Need To Shorten Golf Clubs?

It’s evident that shortening your golf clubs is important if you intend to use them yourself and while a lot of people will have their golf clubs fitted, some opt to purchase second hand clubs.

How To Shorten Golf Clubs

If you have determined that your golf clubs need to be shortened then you’re probably eager to get the job done as quickly as possible so that you can get back onto the course.

How many inches to a standard length golf club?

Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.

How to measure golf clubs?

Measuring Your Clubs in Five Steps 1 Use a forty-eight-inch sturdy straight edge aluminum ruler. A tape measure is too flimsy and won’t give you an accurate measurement even if it is pressed against the club’s shaft. If you don’t currently own an aluminum yardstick, you can easily find one at a local home improvement store. 2 Don’t use your workbench to measure the golf clubs. A better alternative is to stand and place the club in its correct position at address. The sole of the club should be completely flat on the ground. 3 The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft. 4 The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.

How tall should a golf iron be?

Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.

What is the most important spec to pay attention to when you’re shopping for a new set of golf clubs?

According to the pros, the length of golf clubs is the most crucial spec to pay attention to when you’re shopping for a new set of clubs or an extra driver or hybrid.

What should be taken into account when buying a new golf club?

When you’re getting fit for a new set of clubs, launch angle, dispersion, spin rate, and ball speed should also be taken into account in order to ensure you purchase the correct length.

How to tell the length of a golf shaft?

The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.

When a player is fitted for new clubs based on length, what is the posture at setup?

When a player is fitted for new clubs based on length then their posture at setup is an important factor. Ideally, the shaft of the club should pass through the golfer’s waistline. If a golfer bends forward too much at address then the club’s shaft will fall below their waistline.