With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
Full Answer
How to cut golf club graphite shafts manually?
One solution to manually cut golf club graphite (or composite) shafts fast, safe and efficiently is the rod saw blade . Let me give you some handy tips on how to use tool properly. Graphite shafts need special care to be cut properly.
How do you shorten a golf club shaft?
With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How long does it take to cut a golf shaft?
It makes thin straight cuts in all types of shaft materials used in golf. Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
How to cut a golf club with a saw?
Align your cut mark with the blade of the saw and secure the club in the vise. Put your safety goggles on and hold the club so it will not fall as you cut. Turn the saw on. Slowly and smoothly, cut all the way through the shaft. Try to cut it all the way through in one motion, otherwise you may get an uneven cut.
Can you cut a graphite shaft with a pipe cutter?
Graphite shafts need special care to be cut properly. A tubing cutter, that you would use to manually cut a steel golf shaft, will crack or destroy a graphite shaft in no time at all.
How do you cut a graphite golf shaft at home?
1:2614:05Golf Club Repair - How To cut a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big toolMoreIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big tool nut don't skimp even if it's a hand tool.
What can I use to cut a graphite golf shaft?
0:092:12HOW NOT TO CUT GRAPHITE GOLF SHAFTS / Wrong Tool for the JobYouTubeStart of suggested clipEnd of suggested clipAnd the answer is emphatically no and i'm going to show you real quick what happens if you do chooseMoreAnd the answer is emphatically no and i'm going to show you real quick what happens if you do choose to try and use the pipe cutter on a graphite shaft remember graphite shafts you're going to want to
How do you cut a graphite shaft length?
With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How do you shorten a golf club shaft?
0:483:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing we got to do is determine the length of the golf club we're going to we're going to cutMoreFirst thing we got to do is determine the length of the golf club we're going to we're going to cut and how much we need to cut off of it. So we're going to lay the club.
Can I shorten my own golf clubs?
If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
Does shortening a golf shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
How long should your driver be based on height?
Tony Finau is one of the tallest golfers on the PGA Tour at 6'4″, and his driver's length is usually around 45 inches. Both Finau and Fowler are two of the longest drivers on the PGA Tour....Driver Shaft Length Based Solely on Height.Height (feet/inches)Driver Shaft Length5'0″-5'2″44.5″4'10”-5'0″44″< 4'10”43″7 more rows•May 9, 2021
How do you shorten driver shaft length?
How to Shorten Golf Club ShaftsRemove the grip using a utility knife with a hook blade. ... Measure the amount of shaft you want to remove (add an additional 1/8 inch to make up for the end of the grip), and mark the spot with permanent marker. ... Align your cut mark with the blade of the saw and secure the club in the vise.More items...
How do I trim my golf shaft on my butt?
1:323:54How Does Butt Trimming a Golf Shaft Affect Playability? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you cut it from the tip end than the butt end and that has to do with diameters. And theMoreIf you cut it from the tip end than the butt end and that has to do with diameters. And the flexibility of these two ends of the ends of the shaft.
How do you know if your golf clubs are too long?
Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.
How much does it cost to shorten golf clubs?
How much does it cost to shorten golf clubs? On average, it will cost $3-5 per club plus the cost of a new grip to shorten your clubs. If you're looking to save your old grips, you won't have to pay for new grips, but you'll have to pay a save grip fee of around $10 per club.
How much does a graphite shaft cost?
Considering that graphite golf shafts can range from $50 to $500 dollars, it certainly can make sense to cut one down before you replace it.
What to check for when cutting a golf club?
Check to make sure your cut is complete and that there are no cracks or splinters starting to make their way up the golf club.
What Happens When You Cut Down a Driver?
If your driver is the golf club you are cutting down, it is crucial to know the implications of cutting down a driver.
Why use masking tape on golf clubs?
The masking tape will help to make this a cleaner and safer project both for you and the golf club.
Why watch the end of a golf club?
Watch the end of the club because the tip of a graphite shaft is going to be quite sharp.
How much does it cost to cut down a golf club?
The cost of cutting the shaft down will probably be about $15 or $20, and then you will pay an additional cost for a new grip.
What happens if you cut a shaft more than once?
The more times you cut the shaft, the greater the chance of a splinter or a break.
Why use masking tape on graphite shafts?
Secondly, by wrapping tape around the shaft, reduces the likelihood that the shaft would splinter during the last moment of the cutting process.
Can a hacksaw cut steel?
Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops. How To Tips. I would like to share a few how-to tips as well.
Can a rod saw cut graphite?
It makes thin straight cuts in all types of shaft materials used in golf. Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
Can you cut graphite shafts?
Graphite shafts need special care to be cut properly. A tubing cutter, that you would use to manually cut a steel golf shaft, will crack or destroy a graphite shaft in no time at all. Don’t think about pulling the hacksaw from your tool chest either.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Why add weight to a clubhead?
And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
Do all golf shafts have to be cut down?
Did you know that almost all golf shafts are cut down to size before being installed in golf clubs? It's part of the manufacturing and club-building process for new clubs.
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
Feedback
Hey guys. I want to cut a half inch off my driver shaft. I've done a lot of searching but am not finding a definitive answer. I know you need to wrap the area you're cutting in masking tape but what's not clear to me is the correct type of blade to use. Some say hacksaw, others say a chop saw (which I have to admit, I have no idea what that is).
Feedback
i've used a dremel -- or a chop saw. either work fine. hacksaws COULD splinter the ends --not sure if it's 100% true but, i'd rather not risk it.
Feedback
I used a miter box and hacksaw with a blade with the highest number of teeth per inch (TPI) I could find at the hardware store. Came out just fine.
Feedback
What is a chop saw? I have a dremel but what attachment should be used? Also, if using a dremel, how do you get the cut perfectly straight?
Feedback
I'll use anything that has fine sharp teeth. I've done most of my shafts by hand recently because I have limited space and its easier without needing electricity and cords.
Feedback
Dremel cutoff wheel. They use a similar abrasive material circular saw blade as a chop saws uses (which is what you will find at a club maker for cutting graphite shafts). I use it for my graphite shafts as well as my carbon fiber arrows for my compound bow. Never had problems with either.
Feedback
Chop saw is best, Dremel with cutoff wheel will work (but it is tough to make an even cut), and if you use a hacksaw get a 'grit' blade.