How to Shorten Golf Clubs
- Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.
- Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ...
- Wrap masking tape around the area of the shaft that will be cut. The tape will keep the end of the shaft from splintering as you cut.
- Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual.
- Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight.
- Insert the pointed end of a golf tee into the hole at the end of the new grip. ...
- Place the grip over the end of the shaft and push it down before the solvent dries. ...
How do you extend the length of a golf club?
This includes:
- The various types of clubs and the ideal length that each should come with.
- A step by step process of determining the perfect length of your club.
- Assessing and understanding your handicap
- Defining your swing speed
- Determining the right flex for your clubs
- Getting the right clubs for your loft
How to cut golf clubs and regrip them at home?
Regripping Your Golf Clubs at Home – The Complete Guide
- Remove Your Old Grips. In order to save time and increase efficiency, the best way to regrip your clubs is to complete each task in an assembly-line fashion.
- Remove Tape. The next order of business is to remove the old tape. ...
- Apply the New Tape. Now it’s time to put the new tape on the end of the shaft. ...
- Applying the Grip. ...
- Clean Up and Let it Set. ...
How to correctly grip a golf club?
Take your setup and then drop your trail hand off the club. If your hand swings away from the grip and toward your body ... Find a fitting location near you at GOLF’s affiliate company True ...
How to regrip a golf club?
- How to Regrip Golf Clubs 1. Take Off the Old Grip 2. Add Grip Tape 3. Apply Solvent Solution 4. ...
- How to Choose the Right Golf Grips to Regrip Your Golf Clubs Size Firmness Weather Conditions Texture
- Types of Golf Grips Wrapped Corded Rubber Hybrid
- Cleaning Golf Grips
- When to Regrip Golf Clubs
- Signs Your Club Grips Need to Be Replaced
- Final Thoughts
Can I shorten my golf clubs myself?
If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How much can you shorten a golf club?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
How do you cut golf clubs at home?
0:363:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipGood measuring stick a marking pin will need a chop saw that we can chop with and we'll also need aMoreGood measuring stick a marking pin will need a chop saw that we can chop with and we'll also need a grinder just to trim off the burner off the end of it before the club is reesh aft.
How do you shorten a golf club shaft length?
Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
What if my golf clubs are too long?
5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.
Do pro golfers use shorter clubs?
Tour players, who play golf courses that are hundreds of yards longer than the courses we play, and play for millions of dollars, have drivers that average about 44 inches in length.
Should you shorten your irons?
Additionally, shorter length golf clubs can provide more control to the golfer, essentially making the golf club more forgiving. While longer clubs can help increase speed and launch angle, shorter clubs can be easier to hit solid due to the reduction in swing arc.
Does shortening a golf shaft make it stiffer?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft's resistance to twisting.
How long should your driver be based on height?
Tony Finau is one of the tallest golfers on the PGA Tour at 6'4″, and his driver's length is usually around 45 inches. Both Finau and Fowler are two of the longest drivers on the PGA Tour....Driver Shaft Length Based Solely on Height.Height (feet/inches)Driver Shaft Length5'0″-5'2″44.5″4'10”-5'0″44″< 4'10”43″7 more rows•May 9, 2021
Is it OK to shorten a driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
Can you cut down a graphite golf shaft?
Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
Is a shorter driver easier to hit?
It is easier to hit the center of the clubface with a shorter club than a longer club, therefore if you feel like you are struggling with your current driver here's a few things you can try before you cut that driver down or order a new one.
How long does it take to shorten a golf club?
Believe it or not, you can adjust them yourself, without going to a professional. These relatively easy steps will help you shorten a golf club in 45 minutes or less! Steps.
How to cut a golf club length?
1. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off. This distance should be taken from the top of the club. Mark the length. Use a permanent marker to mark where the cut should be made.
How to lubricate a golf grip?
Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.
How to install grip tape on a golf cart?
1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.
How to get sticky glue off of a golf grip?
Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.
How to dispose of a golf club grip?
Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.
How long does it take for a metal shaft to cool?
Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down. Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft.
How does shortening a golf shaft affect swing weight?
Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.
How many swingweight points do you lose when you remove 1/2 inch?
For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
How to tell if a golf club is too long?
Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
What happens if you bend forward too much at address?
If a golfer bends forward too much at address then the club’s shaft will fall below their waistline. If they stand too straight at address then the shaft of the club will hit above their waistline. Ideally, the best way to go about sizing for length is to find a length that maximizes accuracy and distance.
How long is a standard iron club?
Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.
How long is a golf driver?
On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
How long is a three wood putter?
Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
How to adjust length of golf club?
Step 1. From the butt: The easiest and quickest way to adjust the length of a club is to remove the grip and cut a given amount of the shaft off the butt end. Traditionally, this is how many youngsters get their first sets of golf clubs. Their parents cut the clubs down so they are easier for them to handle. Keep in mind, though, that cutting the ...
What does cutting the shaft shorter do to a golf club?
The swing weight, or weight at the head of the club and any additional weighting inside the shaft, is still in place, and cutting the shaft shorter changes the balance of the club as well.
Why do tour pros have their shafts tipped?
Tour pros often have their shafts "tipped," or cut back from the clubhead end slightly to make the tip of the shaft stiffer. This enables them to keep the same length club but have a slightly stiffer shaft near the ball. Cutting a club from the butt end will have somewhat the opposite effect, making the shaft stiffer overall but shorter as well.
How much should a golf shaft be tipped?
Many pros have their shafts tipped as much as one or two inches. The idea behind tipping is to make the clubhead end of the shaft stiffer and even lower torque than it was designed to be to minimize twisting of the club at impact.
How does changing the length of a golf club affect the swing?
Changing swing characteristics: Changing the length of a golf club can moderately or severely change the swing characteristics of the club. Removing length from the butt end of the shaft also removes weight from that end and changes the swing weight and balance of the club. Cutting a shaft from one end or the other also changes the kickpoint ...
Is a shorter shaft stiffer than a longer shaft?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
Can you cut a shaft from the butt end?
Cutting a shaft from one end or the other also changes the kickpoint of the shaft–lowering it if you cut from the butt end or raising it if you cut from the tip. Even a small adjustment to a putter can cause a significant change in feel. Keep these changes in mind when planning any changes to your club.
