how to shorten golf clubs

How to cut golf clubs and regrip them at home?

Once the tape is applied, you will then need to insert the pointy end of a golf tee into the end of your grip; there will be a small hole in the end. Now pop a little grip solvent into the open end and shake the grip to ensure the solvent is evenly distributed. Next, you simply need to put the grip over the shaft and push it down.

How do you extend the length of a golf club?

How to Shorten Golf Clubs Step 1. Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work... Step 2. Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. Scrape off the... Step 3. Wrap masking tape around ...

How to reshaft a golf club?

These relatively easy steps will help you shorten a golf club in 45 minutes or less! Part 1 Removing the Old Grip 1 Prepare the work area. Place a towel or clothes underneath your vice grip. 2 Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. 3 Cut off the grip.

How do they lengthen golf clubs?

How to Shorten Golf Club Shafts Step 1. Remove the grip using a utility knife with a hook blade. Remove the grip tape from the shaft. Step 2. Measure the amount of shaft you want to remove (add an additional 1/8 inch to make up for the end of …

How do I make my golf clubs shorter?

If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.

Can you cut down your golf clubs?

In short, cutting down a club leaves less shaft to offset the weight of the club. And since some players -- including many tour pros with their putters -- still cut down clubs, it's important to know how to offset the potentially negative impact. First, clubs should normally be cut from the butt (or grip) end.Sep 21, 2007

How much does it cost to shorten golf clubs?

However, add 1/8 inch to the cut to account for the grip cap. For example, if your 9-iron shaft is 38 inches long after trimming the tip, trim 2 1/8 inches from the butt end to produce a 36-inch club after the grip is installed.

What if my golf clubs are too long?

What Happens When Golf Clubs Are Too Long? For most golfers, having clubs that are too long will result in the most inconsistent shots. Clubs that are too long will make you stand too upright, which can cause both heel and toe shots as well as a tendency to pull the ball.

Should you shorten golf clubs?

A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.

Can I cut my irons to one length?

1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were alreadyMoreSo I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard. So I brave with them back to my sex iron.

Do pro golfers use shorter clubs?

The PGA Tour, however, resides somewhere in the 44.5- to 45-inch range, with some players going considerably lower. In 2017 Jimmy Walker cut two inches off his driver shaft to 42.5 inches, and Rickie Fowler shaved an inch off to get his to 43.5 inches.

How long should golf clubs be for my height?

1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows

Are shorter irons easier to hit?

Long irons are considerably harder to hit than short irons, and it is good to have a general understanding of this concept. The more prepared you are to take on these long iron shots, the better your chance for success.

How do I know if my golf clubs are the right size?

To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.

How do you know if your golf clubs are the right size?

In irons, more so than in the driver, optimal club length is usually determined by a set of measurements that take into account the player's height, arm length, and swing posture. Clearly, a player who is extremely tall would not benefit by using golf clubs designed for a player who is much shorter, and vice versa.Mar 17, 2022

How long should my irons be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

Measuring Your Golf Clubs

The easiest way to tell whether your golf clubs are too long is to measure them.

When Would You Need To Shorten Golf Clubs?

It’s evident that shortening your golf clubs is important if you intend to use them yourself and while a lot of people will have their golf clubs fitted, some opt to purchase second hand clubs.

How To Shorten Golf Clubs

If you have determined that your golf clubs need to be shortened then you’re probably eager to get the job done as quickly as possible so that you can get back onto the course.

How to lubricate a golf grip?

Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.

How to install grip tape on a golf cart?

1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.

How to get sticky glue off of a golf grip?

Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.

How to dispose of a golf club grip?

Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.

How many times has wikihow been viewed?

To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 23,328 times.

What is wikihow wiki?

X. wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 23,513 times.

How long does it take for a metal shaft to cool?

Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down. Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft.

How to wrap a golf club grip?

Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.

How to shorten a golf club?

How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.

Why is the shaft narrower at the head end of a golf club?

The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.

How to cut a club shaft with a rotary tool?

Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.

How does shortening a golf shaft affect swing weight?

Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.

How many swingweight points do you lose when you remove 1/2 inch?

For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.

Who is Michael Joseph?

Michael Joseph is a golf industry professional in New Jersey. He has worked as a golf professional, instructor, and clubmaker. Joseph's education includes a degree in golf operations management and a certification in club-fitting from The Golf Academy of America (formally the San Diego Golf Academy).

How to tell if a golf club is too long?

Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.

What happens if you bend forward too much at address?

If a golfer bends forward too much at address then the club’s shaft will fall below their waistline. If they stand too straight at address then the shaft of the club will hit above their waistline. Ideally, the best way to go about sizing for length is to find a length that maximizes accuracy and distance.

How long is a standard iron club?

Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.

How long is a golf driver?

On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.

How many inches to a standard length golf club?

Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.

How tall should a golf iron be?

Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.

How long is a three wood putter?

Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.