How to Shorten Golf Clubs
- Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.
- Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ...
- Wrap masking tape around the area of the shaft that will be cut. The tape will keep the end of the shaft from splintering as you cut.
- Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual.
- Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight.
- Insert the pointed end of a golf tee into the hole at the end of the new grip. ...
- Place the grip over the end of the shaft and push it down before the solvent dries. ...
Full Answer
How to shorten a golf club?
How to Shorten Golf Clubs 1 Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip. 2 Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ... 3 Wrap masking tape around the area of the shaft that will be cut. ... More items...
Can you cut down an adult set of golf clubs for kids?
In years past, before junior golf shafts were available, parents made it a common practice to cut down an adult set of golf clubs for their kids. This is certainly an inexpensive way of creating a junior golf set; however, it is not a good solution for several reasons.
What happens if a junior golf club is too short?
Poor fitting clubs can lead to swing problems that can be difficult to correct in later years, and even affect the desire to play. Clubs that are too long will cause the junior to compensate with a swing that is too “flat”, and clubs that are too short will lead to a swing that is too upright.
What's a good junior golf set for my child?
As your child gets older and more proficient, a good junior golf set will include the putter, a 3 wood and a 5, 7 and 9 (pitching wedge) irons. Do not add too many of the lower lofted clubs such as the 2 or 3 iron to your child's set because youngsters will not be able to get the ball airlifted with these lower clubs.
Can you shorten golf clubs for kids?
0:013:20Is it OK to Cut Down Golf Clubs for Kids? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat they want to do is they want to take an old set of clubs that they're not using anymore. CutMoreWhat they want to do is they want to take an old set of clubs that they're not using anymore. Cut them off and give them to their kids or their wife. Usually. It's their kids.
Can golf clubs be cut shorter?
Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.
How do I make my golf clubs shorter?
If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How do you measure a child for golf clubs?
0:131:20U.S. Kids Golf Fitting System - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd stand it up next to them the end of the club should come between the belly button and the chest.MoreAnd stand it up next to them the end of the club should come between the belly button and the chest. If the club comes to there it fits.
Is it bad to shorten golf clubs?
For most golfers, having clubs that are too short will be better than if they're too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You'll also have the tendency to push the ball a lot.
How much can you shorten a golf club?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
Can I cut my irons to one length?
1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the sameMoreSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard.
What if golf clubs are too long?
5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.
Do shorter golfers need shorter clubs?
Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.
What size golf clubs does a 7 year old need?
As your child gets older and more proficient, a good junior golf set will include the putter, a 3 wood and a 5, 7 and 9 (pitching wedge) irons. Do not add too many of the lower lofted clubs such as the 2 or 3 iron to your child's set because youngsters will not be able to get the ball airlifted with these lower clubs.
What size golf clubs should a 10 year old use?
Therefore, a driver, a hybrid -- which makes it easier to get the ball in the air -- a 7-iron, a wedge and a putter are a perfect set. It makes sense to have 12-14 clubs only when a kid becomes 10 years old, can swing harder and sees a distance gap that's larger than five yards between clubs."
What size are junior golf clubs?
What height are junior golf clubs for? Junior clubs are sold from size zero sets for kids 36” tall all the way up to kids 69” tall.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
How long does it take to shorten a golf club?
Believe it or not, you can adjust them yourself, without going to a professional. These relatively easy steps will help you shorten a golf club in 45 minutes or less! Steps.
How to cut a golf club length?
1. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off. This distance should be taken from the top of the club. Mark the length. Use a permanent marker to mark where the cut should be made.
How to lubricate a golf grip?
Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.
How to install grip tape on a golf cart?
1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.
How to get sticky glue off of a golf grip?
Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.
How to dispose of a golf club grip?
Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.
How long does it take for a metal shaft to cool?
Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down. Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
How to get better adhesion on a grip?
It will also emulsify the adhesive and help it to get better surface adhesion with the inside of the grip. Plug the small hole in the top of the grip with a finger and turn the grip upside down. Spray some adhesive into the inside of the grip.
How long does it take for a grip to dry?
Once you have the new grip in place, you will need to let the adhesive dry and cure. It will take approximately 6-8 hours for a full cure.
What tool to use to cut graphite shaft?
For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible. Cut the desired amount from the shaft. Be careful to avoid cutting yourself with the saw or the tool.
Does trimming an inch off a golf club affect the weight?
But since you’re only trimming a little bit—it will only have a small impact on the overall performance of the club. Like we said earlier, big changes have big side effects.
Is it a good idea to cut down a set of golf clubs?
Written by Justin Adams in Beginners' Tips. Some golfers will tell you that it’s never a good idea to cut down a set of clubs. There are others who swear by it and do it all the time to make sure that their clubs are a custom-tailored fit for the golfer who will use them. There are good arguments on either side, but one thing is for sure, ...
How to measure golf clubs for kids?
How to Measure Length for Children's Golf Clubs. Outfit your child with clubs of proper length. It used to be customary to give your child your old golf clubs when he wanted to start whacking balls around. Your toss-offs, however, won't fit many children, instructor Hank Haney asserts in Golf Digest. The shafts are too stiff, the grips are too big ...
Why does my kid pull shots with every club in his bag?
Kids Golf website, PGA master professional and coach John Godwin says that if the toe of the club head is off the ground because the length of the club is too long , your child likely will pull shots with every club in his bag. Golfweeks' Adam Woodard breaks down the results from the match.
How are kids golf sets broken down?
Most kids' golf sets are broken down by age groupings, and for the beginning golfer that will work fine—in most cases. However, there are other considerations that should be taken into account.
What is a good junior golf set?
As your child gets older and more proficient, a good junior golf set will include the putter, a 3 wood and a 5, 7 and 9 (pitching wedge) irons. Do not add too many of the lower lofted clubs such as the 2 or 3 iron to your child's set because youngsters will not be able to get the ball airlifted with these lower clubs.
What is included in the Dexton Big Driver Junior Golf Set?
This Dexton Big Driver Junior Golf Set has a putter, 3 Wood, and a 5/6, 7 and 9 iron. The bag and club covers are also included.
What happens if a youth club is too long?
A youth club that is too long, too heavy, or too stiff will diminish your child's ability and potentially cause frustration. Choosing the right clubs the first time around will get the desired result: a fun and rewarding experience for both you and your child.
Can you use steel shafts on junior golf clubs?
You can use portions of other used steel shafts to extend the clubs or insert hardwood dowels of the appropriate size to add new length and new life onto your junior golf set. If you do decide to purchase a set of longer shafts to extend the life of the set, our recommendation is not to go any more than one inch longer.
Is youth golf rewarding?
Youth Golf Can Be Very Rewarding. Choosing and fitting your youngster with the appropriate clubs can be very rewarding for both you and your child. Just keep in mind that you need to choose the club length based on the child's height and ability rather than simply on their age.
Is it important to keep the weight of a golf club low?
However, the overall club weight is more important for the golf junior. For very short youngsters it is important to keep the overall weight of the club low so that they can swing more efficiently.
What golf clubs do juniors use?
Advanced juniors generally use a kids golf set that includes Driver, Fairway Wood, Hybrid, 5-9 irons, Pitching Wedge, Gap Wedge, Sand Wedge and Putter. This is 12 clubs, leaving 2 more clubs that can be added depending on preference - most common are a Lob Wedge, 5-Wood, or a Second Hybrid.
What is junior golf?
Junior golf clubs sets are broadly categorized into Advanced , Intermediate and Beginner. In addition, certain Beginner sets are categorized as Budget due to their lower cost and cheaper components. Clubs are listed within each category in alphabetical order and not based on our rating or the price of the clubs.
What is intermediate junior golf club?
Intermediate/Advanced, means that the sets are high quality and have more clubs - therefore could be used for Advanced players (e.g. the Ping Prodi G sets). Of course, any intermediate or advanced junior club is also great for beginners but these do usually cost a little more than beginner kids golf clubs.
Is Taylormade Rory junior club phased out?
With the introduction of the TaylorMade Rory junior clubs the Phenom's may be phased out. As of writing this, the TaylorMade site only has the smaller (6 clubs set for ages 5-8) available for sale. See more below for a comparison of the two.
Can you compensate for a heavy golf club?
For example, if a golf club has a heavy head you cannot compensate for the weight by simply fitting a lighter shaft as that makes the club feel even heavier. In recent years some major club manufacturers (e.g. Ping, TaylorMade, Cobra etc.) have started to make better quality junior golf clubs.
Do you cut down adult golf clubs?
Do not cut down adult clubs, they are too heavy and the shafts are generally too stiff. Young kids do not need a full set of clubs but as juniors start playing competitive golf the equipment becomes more important. A putter, wedge and three-wood or driver are great clubs to start with.
