How do you shorten a golf driver shaft?
Jan 19, 2010 · When trimming golf club shafts, make sure to first fit the student to determine if they need a longer or shorter shaft. Trim your golf club shafts with help ...
Does shaft shortening make golf clubs less flexible?
How To Shorten A Graphite Golf Club Shaft Lubricate The Shaft. If your golf club shaft is feeling gritty or not moving smoothly, you may need to lubricate it. Remove The Groove. If you have a graphite golf club shaft, it is possible to shorten it by removing the …
What happens when you cut off a golf shaft?
The butt end of the shaft is grip end. If you are shortening or extending the length of a golf club, this is where you will cut. If you want to change the play-ability of the club (feel, flex to a certain extent, spin rate, dispersion), you will be cutting the tip end of the shaft. To read more about the effects of tipping a golf shaft, here is an article on Golfworks that explains it well.
How do you change the play-ability of a golf shaft?
When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly. Step 1 Insert the golf club into a shaft clamp and tighten the clamp to...
Can you shorten golf club shafts?
With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft.Mar 25, 2018
Can I shorten my golf clubs myself?
Can you shorten a shaft?
Can you cut down a graphite golf shaft?
How do you shorten driver shaft length?
How do you cut a golf shaft length?
Can I shorten my driver shaft myself?
How much can you cut off a golf shaft?
How is shaft length measured?
Does cutting shaft make stiffer?
What happens if your golf club is too long?
Does shortening a golf shaft make it stiffer?
What is the story of shortening golf clubs?
The one kind of story starts out with somebody needing clubs and having a limited budget. They cut a set of clubs down and get more than they paid for in return for their efforts. The other kind of story starts with a perfectly good set of clubs and ends up with a pile of useless metal or graphite.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
How to measure for a new grip on a golf club?
That will tell you how much tape you need to apply to the shaft in order to get maximum adhesion without having any extra sticking out of the bottom of the grip. Once you know how much tape you’ll need on the shaft, measure the shaft, and make a mark a little short of the full length of the grip.
What tape do you use to secure a golf grip?
Adhesive Tape (for securing the new grip – purchase from a pro shop) (the amount you’ll need depends on how many clubs you’re planning on cutting down)
What happens if you cut too much off a golf club?
If you cut too much off of a club, you’ll be making the shaft a lot more rigid. You’ll also be getting into a skinnier section of the shaft, and that might affect the possibility of finding a grip that will fit appropriately. You don’t want to find out that you took too much by watching your club fly out of the grip on the follow-through of the first shot that you hit with it.
How to cut graphite shafts?
Once you have marked the spot where you want to cut the shaft, reposition the shaft in the vice so that you can cut it comfortably and safely. Be sure to set the club in the vice in a way that will protect it from getting bent under the pressure you apply during cutting if you are using a hack saw. For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Why add weight to a clubhead?
And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
Do all golf shafts have to be cut down?
Did you know that almost all golf shafts are cut down to size before being installed in golf clubs? It's part of the manufacturing and club-building process for new clubs.
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
How to shorten a golf club shaft?
Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft. Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker. Fix the golf club in position in a vise.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
What is flex in golf?
The flex refers to how much your golf shaft is capable of bending when a force is applied to it during a swing. It plays a key role in determining the squaring of the clubface at impact. Without flex, there are high chances of not being able to render a solid and good contact consistently. This, in turn, affects the distance and direction of the shot.
Why is grip size important?
Grip size is just as important as the size of the shafts of your driver and other golf clubs for a perfect game. Big grip size can inhibit your wrist release through the impact area and cause a fade or a block.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
How tall is a standard golf club?
Standard golf clubs are generally designed keeping in mind golfers of average build with a height between 5’8” inches and 5’9”.
Series Navigation
I know this might seem obvious, but be sure to measure and mark off the point at which you are cutting. Especially while tipping a shaft (you can’t undo this), it is important to have precise measurements. Use a sharpie to make your marks on the shaft. Here is a tutorial on how to measure golf clubs.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
How to keep golf club from moving?
Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.
How to dry golf grips?
Place the grip over the end of the shaft and push it down before the solvent dries. Inspect the fit of the grip and press out any uneven spots with your fingers. Allow the grip to dry overnight before using the club.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
Why shorten the shaft on a golf driver?
For some people, shortening the driver shaft can help them to hit the ball farther and keep it in play more. That last part is something that we all want to do.
Why is the shaft shorter on a golf club?
Making the shaft shorter makes the club shorter, the shaft stiffer, and it will adjust the swing weight. Your club will have less flex when you remove weight. A regular flex can become stiff, and a stiff can become extra stiff when you shorter it, but that all depends on how much you shorten it. You need to be sure this is what you want ...
Why is a shorter driver shaft better?
Pros: A shorter driver shaft will shorten the arc of your swing. This will help you to hit the center of the clubface more often. Hitting the center of the clubface more often means you are more likely to keep the ball in play than you were before.
What does a longer shaft mean?
A longer shaft means a wider arc to your swing and that creates more speed. But hitting the center of the clubface is much more important. A shorter driver shaft means a shorter arc in your swing and that makes hitting the center of the clubface easier. Many players don’t lose any clubhead speed when they shorten their driver shaft by about an inch.
What happens if you have a shorter driver?
As we talked about before, a shorter driver will decrease the width of the arc to your swing and increase your frequency of hitting the center of the clubface.
How long is the average driver on the PGA Tour?
On the PGA Tour, the average driver length is 44.5 inches. That’s shorter than the standard 45-46 inches.
Does shortening a driver shaft make your handicap fall?
Most professional golfers are aware of the benefits that shortening their driver shaft, at least a little, can give them. This doesn’t mean that shorten ing your driver shaft will immediately make your handicap fall. The biggest factor is still your technique and how you play.
