How to Shorten Golf Club Shafts
- Step 1. Remove the grip using a utility knife with a hook blade. Remove the grip tape from the shaft.
- Step 2. Measure the amount of shaft you want to remove (add an additional 1/8 inch to make up for the end of the grip),...
- Step 3. Align your cut mark with the blade of the saw and secure the club in the vise. Put your safety goggles on...
- Remove the existing grip.
- With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
- Re-install a grip on the newly shortened shaft.
How to shorten a golf club?
How to Shorten Golf Clubs 1 Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip. 2 Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ... 3 Wrap masking tape around the area of the shaft that will be cut. ... More items...
How do you fix a bent shaft on a golf club?
Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
Why do golfers cut down shafts and reinstall them?
But some do-it-yourself golfers also cut down golf shafts, then reinstall them in their clubs. They do this to make their clubs better fit their swing, which might mean cutting the shaft simply to change length, or to change swingweight, flex or other playing characteristics.
How can I shorten the length of the shafts?
With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft.
How does shortening a golf shaft affect swing weight?
How many swingweight points do you lose when you remove 1/2 inch?
About this website
How do you shorten a golf iron shaft?
1:443:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull through soft wits running. And I pull out the next and final step is to just a burr to take theMorePull through soft wits running. And I pull out the next and final step is to just a burr to take the bird that's on the end of that shaft off there so that the grip goes on smoothly.
How do you adjust the length of an iron shaft?
0:4711:54DO MY IRONS FIT ME? THE DEFINITIVE GUIDE TO SHAFT ...YouTubeStart of suggested clipEnd of suggested clipThere is the plus or minus around quarter inch between manufacturers sometimes even in terms of headMoreThere is the plus or minus around quarter inch between manufacturers sometimes even in terms of head styles. So it's better off talking about inches.
Which end do you cut to shorten a golf shaft?
Discrete length shafts, where the iron shafts come shorter in lengths as you go higher up in club number, are in most cases also tapered tip (0.355"). These shafts are pre-trimmed at the tip but NOT at the butt end. The expectation is that your club-builder will trim the butt to achieve the desired final club length.
Can you get your irons shortened?
Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.
How much does it cost to shorten a golf shaft?
How much does it cost to shorten golf clubs? On average, it will cost $3-5 per club plus the cost of a new grip to shorten your clubs.
How do you shorten golf clubs at home?
2:5212:53Grip Removal and Club Shortening. - YouTubeYouTubeStart of suggested clipEnd of suggested clipI need a shaft cutter. Again you can buy these in plumbing stores to cut pipe with this is how I'mMoreI need a shaft cutter. Again you can buy these in plumbing stores to cut pipe with this is how I'm going to cut the shaft.
Should I shorten my iron shafts?
A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.
How long should my irons be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How do you know if your golf clubs are too long?
Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.
How do I trim my golf shaft on my butt?
1:323:54How Does Butt Trimming a Golf Shaft Affect Playability? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you cut it from the tip end than the butt end and that has to do with diameters. And theMoreIf you cut it from the tip end than the butt end and that has to do with diameters. And the flexibility of these two ends of the ends of the shaft.
How do you cut steel golf shafts?
0:394:01How to Cut Golf Shaft DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for the first step you have to remove your old grip. I find the easiest way to do this is toMoreSo for the first step you have to remove your old grip. I find the easiest way to do this is to literally just cut a line all the way down your club.
How much does it cost to get irons shortened?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
Can golf shafts be cut down?
Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
Does shortening a golf shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
Can you switch shafts on irons?
If you're thinking about changing the shafts on your golf clubs, you can either do them yourself or take them to your local golf shop.
What is the standard length of a 7 iron?
The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite.
What is standard length for golf irons?
For most golfers, the length of a golf iron should be 38.75 inches. The height of the player is one of the primary factors that determine the length of the golf irons.
Does shortening a golf club change the lie angle?
Cutting length from or adding length to a shaft will not alter the angle between the hosel and the sole. What it will affect is the "effective lie".
How does cutting a shaft affect swing weight?
For every half inch of length added, the swingweight increases by three swingweight points. For every half inch of length removed, the swingweight decreases by three swingweight points.
How much does tipping a shaft effect Flex?
Tipping any TPT Red Range shaft 1 inch will result in a stiffness increase of 5 cycles per minute (cpm), or one-half flex. This removes the need for half flexes in the Red Range. When a 14 Lo is tipped 1 inch, for example, it effectively becomes a 13.5 Lo.
Shortening the shaft to 43.5 inches - Shafts - MyGolfSpy Forum
If all you do is remove the grip and cut 1.5” off the butt end and regrip, the shaft will play slightly stiffer and swing weight lighter. Now if you decide to add head weight to bring the swing weight back up the shaft will then play softer (depending on how much weight is added back to the head).
cutting a shaft vs. choking down - WRX Club Techs - GolfWRX
I’m new to club making and have a question that would seem basic, so please pardon the simplicity. What would be the difference between choking down on a club regularly versus just cutting the club down? For example, consider a PX 6.0 in a 6-iron. What would be the difference between having the c...
How to Shorten a Golf Club in 5 Steps ⋆ Golfing Tips For Beginners
Some golfers will tell you that it’s never a good idea to cut down a set of clubs. There are others who swear by it ... Read moreHow to Shorten a Golf Club in 5 Steps
Are Your Golf Clubs Too Long or Too Short: 4 Steps to Size Your Clubs
How to tell if your golf clubs are too long or too short. Includes the four steps to measure your clubs and see what size you should be using.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
Feedback
Did you get fit for shaft? If you do get them altered get SW checked. Srixon are a bit over standard. I think .25 or .5 inch.
Feedback
I need to have a set shortened, by three quarters of an inch. they were built a bit too long.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
How to get better adhesion on a grip?
It will also emulsify the adhesive and help it to get better surface adhesion with the inside of the grip. Plug the small hole in the top of the grip with a finger and turn the grip upside down. Spray some adhesive into the inside of the grip.
How long does it take for a grip to dry?
Once you have the new grip in place, you will need to let the adhesive dry and cure. It will take approximately 6-8 hours for a full cure.
How to cut yourself with a razor blade?
Put a fresh blade in your razor knife. A sharp blade cuts easier and that protects you from having to push or pull too hard, which could expose you to a higher risk of cutting yourself. A hook blade makes this step easier and safer. Slice through the grip until you have cut it from top to bottom.
What tool to use to cut graphite shaft?
For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible. Cut the desired amount from the shaft. Be careful to avoid cutting yourself with the saw or the tool.
Does trimming an inch off a golf club affect the weight?
But since you’re only trimming a little bit—it will only have a small impact on the overall performance of the club. Like we said earlier, big changes have big side effects.
Feedback
I have a chop saw to shorten graphite shafts. Harbor Freight has a 6 in chop saw for $50 that will do the job (need to buy the abrasive disk separately).
Feedback
Since it already in a PW, you should not have to think about tip trimming. It should strictly be the grip (butt), end.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
How does shortening a golf shaft affect swing weight?
Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.
How many swingweight points do you lose when you remove 1/2 inch?
For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.
