Should you buy a soft tip shaft for slicers?
But Tim Briand, the Senior Vice President of True Spec Golf (which is owned by the same parent company as GOLF) warns that a shaft with a softer tip isn’t great for every slicer. If you’re the type of golfer who “stands up” into impact with high hands, a softer tip may cause more droop at impact.
How to fix a slice in golf?
Fixing a slice first requires you to fix your grip by positioning your hands properly. Stop your weak grip and rotate the hands to make a neutral or strong grip. How to fix a slice requires a closed club head during backswing and delivery. Strike the ball using the center or tip of the club head.
Does cutting the tip of the shaft make it stiffer?
"Cutting more of the tip will have the effect of getting rid of some of the weaker end of the shaft which, in turn, makes the shaft play and feel more stiff.
Does shaft stiffness affect a slice?
Shaft stiffness has nothing to do with the slice. What causes a slice in golf is one of or a combination of all of the problems mentioned in this article. The most common cause of a golf slice is an over the top swing path or “casting” during the downswing.
How do you cut a key slot on a shaft?
1:2514:46How to use and make keyways - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is an eighth inch key way so it means the key which is right here is eighth of an inch square.MoreThis is an eighth inch key way so it means the key which is right here is eighth of an inch square. And then you can get these you know however long you need then just cut them down to size.
How do keyed shafts work?
A key is a piece of metal used to connect a rotating machine element to the shaft. A key prevents a relative rotation between the two parts, and may enable torque transmission to occur. For a key to function properly, both the shaft and rotating elements (gear, pulley and coupling) must have a keyway and a keyseat.
How do you put a key on a shaft?
0:221:16What is a shaft key? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe key is best placed in the motor shaft. And you can put a little grease on it and it'll holdMoreThe key is best placed in the motor shaft. And you can put a little grease on it and it'll hold itself in the shaft.
How does key way work?
If you look at a key straight on, you will see its unique shape. This shape is often referred to as the keyway or key section. The keyway can restrict the wrong keys from being inserted into the cylinder. Therefore, a cylinder with a particular keyway will only work with a key with the matching keyway.
What is the disadvantage of keyed joint?
Too much securely fixed keyed joint might become difficult to dismantle. Causes shaft imbalance. They introduce stress points due to the notch effect and reduce shaft strength. Possible axial displacement of hub unless locked by an extra component such as circlip or set screw.
How do you cut a keyway by hand?
2:517:57IN THE WORKSHOP - CUTTING A KEYWAY WITHOUT A ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I use a couple of pieces of wood. And gently tap them into position and now the chip can moveMoreSo I use a couple of pieces of wood. And gently tap them into position and now the chip can move crude bit effective.
What is a feather key?
Definition of feather key in machinery. : a sunk key without taper that is permanently fixed in one of the connected pieces and that is a sliding fit in a keyway in the other so as to permit relative longitudinal motion. — called also spline.
What is saddle key?
Definition of saddle key : a key for securing a member to a machine shaft that fits into a keyway in the secured member and is concave to grip the shaft by friction — compare flat key, sunk key.
How long should a shaft key be?
The key length should be less than about 1.5 times the shaft diameter to ensure a good load distribution over the entire key length when the shaft becomes twisted when loaded in torsion.
What are Half Moon keys?
A woodruff key, also known as a half‑moon key, is a semi-circular machine shaft key that prevents gears, hubs, or other components from moving independently of a rotating shaft or spindle. Woodruff keys are inserted into a key seat created by a woodruff key cutter or arbor cutter.
How is a keyway cut?
A notch called a keyway is cut on the inside of the gear along with another notch cut, longways, into the shaft. Then and a piece, usually metal, called a key is inserted into the shaft keyway. The gear can then be fitted onto the shaft and the keyway on the gear will fit over the key, inserted in the shaft.
Why do we use key in shaft?
In mechanical engineering, a key is a machine element used to connect a rotating machine element to a shaft. The key prevents relative rotation between the two parts and may enable torque transmission.
What is a Slice in Golf?
A slice in golf is a severely curving golf shot that has a left to right ball flight (for the righties of course), and is generally a result of a miss hit or incorrect swing path. For amateur golfers, slices are a VERY common problem.
What Causes a Golf Slice?
Slicing in golf is usually caused by one or a combination of an over the top swing path, a ball position that is too far back, and/or a weak grip on the club.
How to Fix a Slice in Golf?
Okay, so how do you actually fix your slice?! Well in theory, maybe we don’t want to completely eliminate it, but to tone it down to a controlled fade.
How to Stop Slicing Driver
This section is for those who want advice/help specifically on how to stop slicing DRIVER.
Drills – Golf Slice Fix
With the grip, choose an older glove and put a dot on the knuckle of the index finger, the middle finger, and the ring finger. When you grip the club, make sure you can see either 2 or all 3 of these dots CLEARLY without moving your head.
Final Thoughts – How to Stop a Slice in Golf
You’ve gotten this far, so I really do think you’re now armed with the knowledge to FIX YOUR SLICE once and for all!
FAQ – How to Stop Slicing the Golf Ball
Note – Some of these FAQs were covered throughout the article, but I still get these questions a lot… so here are the “short and sweet” answers to the most common questions:
Which side of the head do you slice?
Slicers tend to hit the ball with the heel side of the head. That’s because the heel is open, and you’re swinging the club more towards the left side (or right if you’re left-handed). You should focus on hitting the ball with the middle or toe side of the clubface in order to fix your slice.
What causes a slice path on a downswing?
Bad posture: A posture that’s too upright hinders your backswing, resulting in a slice path on the downswing. Not being flexible enough: Limited flexibility affects your rotation during a backswing which then messes the downswing, resulting in a slice.
How to avoid slicing with a driver?
To avoid slicing with a driver, you just need to follow the steps outlined above. From adjusting your grip so that it’s neutral or slightly strong to making the clubface square or closed during impact. A good piece of advice is to start hooking on purpose, to change your brain’s idea of the swing path as you practice.
Why do players slice the ball?
Most players slice the ball because they open the clubface during the backswing and fail to close it on time. Then there are those who close the clubface but fail to prevent it from closing further, thereby hitting a hook shot. The challenge is to time your hit.
How to fix your grip on the golf ball?
For one, don’t aim left if you’re right-handed (and vice versa). Secondly, fix your grip by making it neutral or a bit strong. You should also ensure the ball positioning is perfect and try to keep the elbow tucked in during the backswing while rotating the body and keeping the grip back behind your heels.
How to make your golf club swing more neutral?
Start by checking the golf club and ensuring the shaft is not too stiff. Next, adjust your grip to the left to make it neutral or a little stronger. You can then work on your positioning. The hips, feet, and shoulders should point in one general direction. You also need to work on your swing and release.
What is a slice shot?
A slice occurs when a player hits the golf ball, and instead of following the right flight path, it swings from left to right (for right-handed golfers), and from right to left (for the left-handed players). There are many factors that lead to a slice shot. They include:
What is a slice off the tee?
The slice is undoubtedly the most common issue that plagues amateur golfers, and it costs them distance, strokes on the scorecard, and sanity. The best way to fix a slice, of course, is to take lessons from a teaching professional and spend endless hours on ...
Why do pros use driver shafts?
The problem is, many pros use driver shafts that are built to lower spin and keep the ball from drawing too much. They use stiff and stable profiles, often with very strong tip sections. To reduce a slice, you’ll want to do the opposite.
Is a softer tip better for slicers?
But Tim Briand, the Senior Vice President of True Spec Golf (which is owned by the same parent company as GOLF) warns that a shaft with a softer tip isn’t great for every slicer.
Why do you aim to the left when you slice the ball?
By moving your aim left, it actually is promoting more of the slicing motion. Basically, you are taking your slice and slicing it even more.
How to get a golf ball to go in a stance?
Start by addressing the golf ball with your feet together. Next, take your lead foot and move it forward and slightly out towards the target line. Take your trail foot and move it back and slightly behind you. Your stance will now be a little be closed relative to your target line.
How to takeaway a golf tee?
Start by taking a golf tee, open your golf glove flap and close it around the base of the tee. The base should rest on the back of your hand, with the tee sticking straight out. As you start your takeaway, rotate the tee towards the ground, pointing straight down.
What is the most common mistake at the top of the swing?
Easily the most common mistake at the top of the swing is amateur golfers trying to make their swing too long. Many amateur golfers equate a longer swing to more distance, but more often the added length just gets the club into a poor position.
How to tell if your hand is neutral grip?
Most people would agree that with a neutral grip, when you look down at the lead hand, you will see the top two knuckles. For a stronger grip, your hands will rotate over and show more knuckles (3 or more). A weak grip will rotate the hands the other way, and show no knuckles.
What is it called when you take a golf club and hold it in a neutral position out in front of you
Now, if you took a golf club and held it in a neutral position out in front of you, your lead wrist can do one of two things. Let’s focus on the back of the hand, or where a logo might be on a golf glove. If you took that logo and rotate the wrist towards the sky, that is called Extension.
What is the phrase for the club head out?
So when you start the takeaway, the hands stay in towards the thigh, while the club head stays out away from the body.
What is slice shot?
A slice shot is caused when the club travels from an out-to-in swing path with the club face open to that path and the target. For a right handed golfer, this sees the ball start to the left of the target before swerving right and finishing well right of the target.
What is shaft flex?
Shaft flex. The other area of the driver where most golfers go wrong is shaft flex, and again we can probably point the blame at the professional ranks (although it isn't really their fault). Most top male professional golfers use an 'x-flex' shaft in their driver, meaning the shaft is considered to be 'extra stiff'.
Why do golfers lean toward the target?
Specifically, those with a slice usually lean toward the target during the backswing, only to reverse directions and lean away from the target in the downswing.
Why do amateur golfers use a driver with little loft?
Not only does this decrease the amount of launch angle they can create but also increases the amount of side spin. If players struggling with a slice used a driver which had more loft, the open club face at impact would be countered by the extra back spin.
Why do golfers leave the game?
In fact, some golfers will even wind up leaving the game because they just can't have any fun while sending one ball after another into the woods.
Can you hit a wild driver with your irons?
If you are hitting relatively straight shots with your irons, for instance, you should not be hitting a wild driver with your driver. If that is the case, you need to take a careful look at the specs of your driver to ensure they aren't causing you problems. Unusually short tee shots.
Is it hard to be clear headed?
It is hard to be clear-headed about an issue when you let it get the best of your temper. Forget about all your frustrations and poor shots and just take a rational approach to eliminating the slice. With a clear head and a positive attitude, straight shots may be just around the corner.
When hitting a golf ball with an iron, do you want to hit it?
When you hit the ball with an iron, you want to hit it just as the “plane” (your club head) is landing. The opposite is true of your driver. When you hit the ball with your driver, you want to catch the ball on an ascending motion. This would be just after the low point of your swing, when the “plane” is taking off.
When to hit a golf ball with a driver?
With your driver, you hit the ball after the low point, when club head starts traveling more to the left ( if you’re right handed). This is why you have a much easier time hitting straight golf shots with your irons . . . and why you have to have to adjust for your driver.
What happens if you use the same golf swing for both shots?
If you don’t account for that and instead use the exact same golf swing for both shots, you’re going to have trouble with one or the other. This is why one of the most common complaints throughout the history of golf is, ...
How to play golf with a club?
The next time you step up to the tee: 1 Bump your lead head toward the target and keep your head back. 2 Aim your stance slightly to the right (left if you’re left-handed). 3 Hover your club head behind the golf ball.
What does it mean when your club head hits the ball?
When you swing your iron, you hit the ball before you hit the low point. This means your club head is maintains whatever aim you set up through the moment of impact. In other words, all you have to do is aim and swing through. But your driver is different.
Can you do a deep dive in golf?
You can do a deep dive, uncovering all the secrets of why you slice the ball and practicing drills to fix it. As a golf coach, I’m all about his option, because I think golf is fascinating and drills are fun.
Can you use the same swing for both irons and driver?
You can’t use the exact same swing for both your irons and your driver. Those two types of clubs are designed differently, with different shaft lengths and different lofts. They are made to achieve different goals. And until you understand those differences, you’re going to hit the ball into the weeds again and again.
How to hit golf balls?
1. Grip - you do not want your hands turning too much towards the target. We want to strengthen your grip, or turn it away from the target so you can see more knuckles (2:10 on the video to see how to do this). Change the grip, then hit golf balls. It might take some practice, but this is the first stage. 2.
How to prevent hooks in golf?
1. Grip - so to prevent those hooks, we want to reverse the entire process for curing a slice. The right hand is likely too much under the club, so you need to move your hands towards the target. Rather than have maybe four knuckles on the lead hand showing, we want to see two or three.
