If the latter, try resetting the MIB (with the MIB turned-on, keep holding down the ON/OFF button until the MIB powers-down and then restarts again) If you still have the same problem - trying making the changes with the MIB switched-off. If this still doesn't work, try first entering the security code 20103.
Full Answer
Does discover pro MIB2 work on a Golf R-Line TDI?
I got a second hand/unlocked/cp removed/fully activated Discover Pro MIB2, to change the one on my Golf R-Line TDI, that came with some problems. I installed it and it works great, but the car image shown is a Passat Variant instead of a Golf.
How do I access MIB2 file system?
There are several methods to access MIB2 filesystem. After establishing network connection you can telnet into the device and use log in using one of the MIB2 root passwords that matches your device. By enabling Developer Mode and connecting UBS to Ethernet adapter.
Can I Retrofit my MIB2 with a larger display?
This retrofit will give you the ability to retrofit an OEM 8" display, give your vehicle Apple Carplay capabilities, Google Map support with Carnet, and a host of other features. If you have a 2016 or 2017 MIB2, we would recommend going with our Display only retrofit kits to take advantage of the larger display.
Does the MIB II work well with Waze?
The MIB II unit is light years ahead of the MIB 1 unit. Car play works well. Running Waze and other iOS apps through Car Play work well. I still hope to work out a few more kinks.
How do I reset my VW Golf computer?
1:022:54How to Reset Your Car's Computer, Old School Scotty Kilmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo start the vehicle. And put it in neutral. Let it run for about four minutes in neutral. Then youMoreSo start the vehicle. And put it in neutral. Let it run for about four minutes in neutral. Then you put it in the low gear not drive but low gear leave your foot on the brake.
How do I reset my VW Golf infotainment system?
If you're a Golf owner with a broken infotainment touch screen, the first thing you should do is to try a hard reset. To do this, press the power button and hold it for about 10 seconds. This should reset the system. Some Golf owners said that doing this solved the problem.
How do I reset my Volkswagen audio system?
1:051:38How To: VW Composition Media Reset / Reboot - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will see the startup screen come back on like. So that is a simple reboot on the competitionMoreYou will see the startup screen come back on like. So that is a simple reboot on the competition media and the discover media box of Volkswagen radio system thanks for watching.
How do I reset my mib2?
0:342:08Audi A4 B9 (8W) MMI system restart reboot (MIB2 MHS2) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo on the control panel over here you have two switches you need to press both of them forward. AndMoreSo on the control panel over here you have two switches you need to press both of them forward. And at the same time press the control knob you don't need to hold it in this position.
How do I reset my Volkswagen?
1: Turn off the ignition. 2: Press and hold the 0.0 button on the instrument cluster and turn on the ignition. 3: Release the 0.0 button and press the 'hour and minute' button to enter the reset function. 4: Wait a few seconds until the display changes back to normal, then turn off the ignition.
How do I reset my VW infotainment system 2017?
0:181:13Soft Reboot-Reset of the infotainment system in newer VW Atlas, Cross ...YouTubeStart of suggested clipEnd of suggested clipAnd so a good way to reset them is just to power them off so i'm going to show you how to do thatMoreAnd so a good way to reset them is just to power them off so i'm going to show you how to do that right now with a little 10 second reset. Okay when you've got the infotainment.
How do you reset a VW radio without the code?
Method 1Turn on the ignition.Turn your radio on and check if it shows 'CODE'. If it shows that, turn the radio off.Then while the thing is off, press down and hold the power button for 40-50 minutes.Once you hold your power button for that long, the car radio system will bypass the code and start working.
How do I reset my VW Golf after changing the battery?
How To Reset The ImmobilizerDisconnect both battery cables.Tap both cables together.Leave the cables disconnected for fifteen minutes.Reconnect the cables to the battery.
Why is my Volkswagen radio not working?
You can determine if too much amperage is the root of the problem by seeing if the size of the fuses matches the one listed in your owner's manual. If they don't match, the best thing you can do is to replace the fuses to the correct size and put in a new radio.
How do I reset my VW Bluetooth module?
0:111:22How to reset your VW Bluetooth module - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you want to do is you want to squeeze the connector. And pull it towards you and it's going toMoreWhat you want to do is you want to squeeze the connector. And pull it towards you and it's going to kind of flip over you're going to pull that out and then connect it back up.
How do I reset my Volkswagen CarPlay?
On your iPhone, go to Settings > General > CarPlay. If your car is still listed here, and you still can't connect, select the car, and then select Forget This Car. From here, start the connection process over by unplugging and plugging the USB cable back into the car.
How do I update my VW infotainment system?
How to perform the update?Download firmware and extract it to desktop of your computer.Copy all contents into SD card's root folder. ( not in a folder or archive. ... Put SD card into infotainment system's SD1 slot.Press and hold menu button. ... Click start and update will be started.Once completed click "done" icon.
Firmware update
Links found on the web. They come and go. Most likely these listed below will soon be unavailable.
Hacking
In some cases hacking is the only way to enable some features in some cars. For example Porsche PCM4.0 was not available from factory with Android Auto support. Also there is no FEC for Performance Monitor if it was not enabled from the factory. Hacking MIB2 is basically 3-step process:
non-Hacking feature activation
MIB software has an option to override .fec file for software testing purposes. Presence of a special exception list file with SWaP codes listed in it will cause those codes to be visible in system a valid. To insert this file there's no root access required. It's copied to the system via standard update procedure from Sd-card.
