:max_bytes(150000):strip_icc()/golf-stance-posture-2-crop-56df06c43df78c5ba054bed7.jpg)
How To Spine A Golf Shaft
- Purchase The Correct Spine. Purchasing the correct spine for your golf club is important if you want to hit the ball...
- Remove Old Spine. It’s important to remove the old spine from your golf shaft before you start spining your new one.
- Install New Spine. If you have an old golf shaft that is not in good condition, it is time to install a new...
Should you spine your golf shafts?
How To Spine A Golf Shaft Purchase The Correct Spine. Purchasing the correct spine for your golf club is important if you want to hit the ball... Remove Old Spine. It’s important to remove the old spine from your golf shaft before you start spining your new one. Install New Spine. If …
What is Spining in golf?
Sep 28, 2018 · A spine is an inconsistency created during the manufacturing... Hireko's Technical Director Jeff Summitt will demonstrate how to find the spine of a golf shaft.
What is the best orientation for the spine in golf?
Nov 26, 2011 · Paul Jenner (The Golf Mechanic)Explains how each shaft is different and how the position of the spine will change from club to club to create perfect FLO (Fl...
Why do you need to find a shaft's spine?
Golf Shaft Spine Orientation. There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation. The swing plane means that the spine is perpendicular to the clubface and the droop plane is parallel with …
Where do you align the spine on a golf shaft?
The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o'clock or 9 o'clock position – also called the neutral position.)
Do you need to spine a golf shaft?
' Golf shaft makers today typically pre-spine their shafts, so spining is not as common as it once was after-market. Recreational golfers don't need to worry about spining their golf shafts.Feb 6, 2020
Does golf shaft spine alignment work?
It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing. These all seem like outcomes most golfers would want to have in their bag.
Is spine alignment necessary?
Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.Oct 14, 2019
How important is arrow spine alignment?
0:2511:17Spine Indexing: Is It Worth Your Time? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe spine of that that arrow. And make sure that all those arrows are flexing identically when they'MoreThe spine of that that arrow. And make sure that all those arrows are flexing identically when they're coming out of the bow. So it used to be that you had to kind of like.
Do driver shafts have a spine?
all shafts have a spine and when you custom fit a driver shaft you ensure spine alignement towards the face of the shaft. when you start to ajust the shaft position, then you move the spine position facing a different direction.May 30, 2012
How can I align my spine at home?
Keep your posture in mind, even if you're taking it easy.Moving regularly is key! Don't sit for too long, even in an ergonomic office chair. ... Keep both of your feet flat on the floor. Consider a footrest if necessary.Keep your back aligned against the back of your chair. Avoid leaning forward or slouching.Jun 28, 2020
Can you realign your own spine?
However, while it might be tempting to try to self-correct your spinal misalignment at home, it is never recommended to do so without the help of a medical professional.Jul 13, 2020
How long does it take to realign your spine?
Normally, when you get manual manipulation of the spine to correct any of the issues you may be suffering from, this initial process takes adults about 2-3 weeks with two spinal corrections throughout the week.Oct 19, 2020
What is the spine orientation in golf?
Golf Shaft Spine Orientation. There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation. The swing plane means that the spine is perpendicular to ...
Why do you need to spine align your shafts?
It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing. These all seem like outcomes most golfers would want to have in their bag.
What is swing plane?
The swing plane means that the spine is perpendicular to the clubface and the droop plane is parallel with the clubface. This is a piece of advanced club builder knowledge that can make a difference to the feel and performance of your clubs.
What is pure shaft positioning?
PUREing is probably the most famous method of optimising shaft positioning and it was invented by a company called SST (Strategic Shaft Technologies). PURE stands for P lane of U niform RE peatability. This is a proprietary process that they claim is accurate to one degree.
What is a vice in golf?
A vice holds the grip-end of the club so that you can test the club. Although it important to point out here that this should be done without a grip on the club. From there you need to find the balance point that gives the club perfect oscillation, then you need to mark the shaft.
Do graphite shafts have spines?
Yes, they do. Graphite shafts have come a very long way in a short period of time thanks to new manufacturing methods and materials. Graphite shafts actually have two spines, creative called “S1 and S2” by the industry. These are the two stiffest oscillation points.
Is golf a hard sport?
Golf is a hard sport to play and many things are uncontrollable during a round. A gust of wind, a bad bounce or other bad breaks are out-with your control.
Why do golf shafts have spines?
A golf shaft is said to have a 'spine' if it is inconsistent in its stiffness when bending in different directions. Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining.'.
What is a spin in golf?
Updated February 06, 2020. "Spining" (one "n," as in "spine") is a term that applies to golf shaft s and describes a process of matching all the shafts within a set of clubs so that their most consistent bending positions all point in the same direction. Spining is a service to golfers offered by some custom club makers and some club fitters.
Why is spining important?
Spining was once a pretty important service provided by custom club fitters to highly skilled golfers and to other golfers who love diving deep into the technical side of golf equipment. But with the improved golf shaft manufacturing standards of today, is spining still important?
Do golf shafts have consistency?
Wishon continued: "While the top-quality shaft makers do manufacture shafts with very high accuracy and consistency, there are shafts in the golf industry that possess a variation in the consistency of the stiffness about their circumference. If severe enough, these inconsistencies can cause misdirection problems when the shaft is installed in such ...
Is spining golf shafts a service?
The answer to this question is easy: No. The spining of golf shafts is not something that any recreational golfer needs to be concerned about, nor is it a service on which any recreational golfer needs to spend money today.
What is a spine?
The spine is the part of the shaft that is more resistant to bending than any other part.
What can be done?
I start by finding the shafts spine, once found, I align and install the shaft into the club head so the spine works with your swing and not against it.
An added benefit
On a graphite shaft the normal position for the shafts spine is face up, this gives the shaft optimum resistance to shaft drop. (For info on shaft droop read up on the effect of shaft flex and club length on lie angles on the loft and lie page)
Some history
In February 1999 the golf’s governing bodies modified the rule on golf shafts that required all shafts to “bend symmetrically in all directions”, they decided it was no longer against the rules to orientate the shaft in the club head, as long as the shaft imitated the effect of bending symmetrically (you are not allowed to orientate the shaft to make a club that produces a draw or fade)..
Shaft orientation also know as spining, puring, or optimizing USGA Ruling
Because of a change in the interpretation of a USGA rule. Rule 4-1b states: b. SHAFT The shaft shall be generally straight, with the same bending and twisting properties in any direction Appendix II 4-1b states, BENDING AND TWISTING PROPERTIES.
Some science
An independent study on spine alignment was undertaken by Golf Science Consultants Inc, performed by J.
What Others Say
Tom Stine, PGA Tour Partners Magazine. September/October 2002: “The bottom line is that if the spines are not set in the club heads at the proper angle in relation to the clubface, we are not getting the most out of our golf clubs and we will continue to have golf clubs that will perform differently than others.
What is the stiffest plane of a golf shaft?
For our purposes, the spine of a golf shaft is the stiffest plane of the shaft. Finding the stiffest plane can be performed by several different methods. One method is by using the Lockie board. When a shaft is placed on the board and bent, a state of equilibrium exists when the weaker plane is the bend plane.
Where is the Penley shaft located on the Autoflex machine?
Since Penley shafts are checked on the Autoflex machine which marks the weaker plane, graphics are placed on the shaft with Penley located 90° from the Autoflex mark (on the spine).
What is the weak plane on a ruler?
The weaker plane bends easily and the “spine” of the ruler is on the sides since it is more difficult to bend. Another method is using the Autoflex Machine. The Autoflex machine performs the same basic test as the Lockie board, but bends the shaft up instead of down. The Autoflex then marks the inside of the curved shaft (the weak plane).
