Golf-FAQ.com

how to spine align golf shaft

by Ines Barton Published 3 years ago Updated 2 years ago
image

  • Clamp the grip end of the club in a vise.
  • Test the alignment of the spine.
  • Tape a strip of masking tape around the shaft just above the club head.
  • Remove the club head and grip from the shaft.
  • Find the dominant spine of the shaft with a spine finder.
  • Fit the club head and grip to the shaft.

Part of a video titled How to Find the Spine of a Golf Shaft - YouTube
1:50
3:31
Then you want to mark at the top of the shaft for each time that. It. You feel it click into place.MoreThen you want to mark at the top of the shaft for each time that. It. You feel it click into place. And you'll see each time I do this. It's going to pop into the same. Place.

Full Answer

What is spine alignment in golf clubs?

The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o’clock or 9 o’clock position – also called the neutral position.)

Should you spine align your shafts?

It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing. These all seem like outcomes most golfers would want to have in their bag.

What is a spine in golf shafts?

A Spine should be visualized as a backbone or ridge in the golf shaft, running down its length, more resistant to bending than any other part of the shaft.

What is the best orientation for the spine in golf?

Golf Shaft Spine Orientation There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation.

Why do you need to spine align your shafts?

What is the spine orientation in golf?

What is swing plane?

What is pure shaft positioning?

What is a vice in golf?

Do graphite shafts have spines?

Is golf a hard sport?

See more

image

Where do you orient the spine on a golf shaft?

Golf Shaft Spine Orientation There are two main positions that you can align the spine in, the swing plane and the droop plane.

How do you build a shaft spine Finder?

1:0812:22How to Make a Golf Shaft Spine Finder - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the one I'm using to put where you put the shaft through it right you bend it down itMoreThis is the one I'm using to put where you put the shaft through it right you bend it down it rotates around and finds the spine.

Is spine alignment necessary?

Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.

How do you true a golf shaft?

5:0715:58How to FLO a Golf Shaft (correct position of shaft alignment) - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you find the spine the shaft. That this is the point that you line up at the 12 o'clock of theMoreOnce you find the spine the shaft. That this is the point that you line up at the 12 o'clock of the shaft with the golf head.

Do you need to spine a golf shaft?

Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining. ' Golf shaft makers today typically pre-spine their shafts, so spining is not as common as it once was after-market. Recreational golfers don't need to worry about spining their golf shafts.

How do you align the spine of an arrow?

0:518:21Tech Tuesday | Spine Alignment | Victory Archery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe the paradox of arrow is going to be vertical. So you want that spine alignment mark to be at theMoreThe the paradox of arrow is going to be vertical. So you want that spine alignment mark to be at the 12 o'clock. Or six o'clock. Position i prefer the 12 o'clock because the graphic sits up.

Do pro golfers pure their shafts?

On every major professional tour, the best golfers in the world rely on the groundbreaking SST PURE Shaft Alignment to make sure their golf clubs perform consistently. Almost $2 billion has been made on the PGA Tour by players who have SST PUREd their shafts for consistency, accuracy and distance.

What are the symptoms of a misaligned spine?

If your spine is misaligned, it can lead to a wide variety of unexpected health problems. These problems range from limb pain and numbness through to fatigue and frequent headaches.

What is spine alignment in golf?

The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o'clock or 9 o'clock position – also called the neutral position.)

Is Puring a golf shaft necessary?

The Results. Our first myth is totally busted – PUREing a shaft led to significant distance increases. On average, our testers gained over 7 yards of total distance with the PUREd six iron compared to the non-PUREd club. That's nearly a full club of extra distance despite the fact that the two clubs had the same loft!

What does Puring a shaft do?

Simply put, as Briand explains, puring a shaft helps to identify the inconsistencies of a particular golf shaft as compared to the average or expected design of that shaft. That way, a club builder is armed with certain information to build the club in the most stable and consistent orientation.

How do you pure a golf shaft at home?

How to Pure a Golf ShaftClamp the grip end of the club in a vise. ... Test the alignment of the spine. ... Tape a strip of masking tape around the shaft just above the club head. ... Remove the club head and grip from the shaft.Find the dominant spine of the shaft with a spine finder. ... Fit the club head and grip to the shaft.More items...

What is a spine?

The spine is the part of the shaft that is more resistant to bending than any other part.

What can be done?

I start by finding the shafts spine, once found, I align and install the shaft into the club head so the spine works with your swing and not against it.

An added benefit

On a graphite shaft the normal position for the shafts spine is face up, this gives the shaft optimum resistance to shaft drop. (For info on shaft droop read up on the effect of shaft flex and club length on lie angles on the loft and lie page)

Some history

In February 1999 the golf’s governing bodies modified the rule on golf shafts that required all shafts to “bend symmetrically in all directions”, they decided it was no longer against the rules to orientate the shaft in the club head, as long as the shaft imitated the effect of bending symmetrically (you are not allowed to orientate the shaft to make a club that produces a draw or fade)..

Shaft orientation also know as spining, puring, or optimizing USGA Ruling

Because of a change in the interpretation of a USGA rule. Rule 4-1b states: b. SHAFT The shaft shall be generally straight, with the same bending and twisting properties in any direction…” Appendix II 4-1b states, “BENDING AND TWISTING PROPERTIES.

Some science

An independent study on spine alignment was undertaken by Golf Science Consultants Inc, performed by J.

What Others Say

Tom Stine, PGA Tour Partners Magazine. September/October 2002: “The bottom line is that if the spines are not set in the club heads at the proper angle in relation to the clubface, we are not getting the most out of our golf clubs and we will continue to have golf clubs that will perform differently than others.

What position is the spine in golf?

The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o’clock or 9 o’clock position – also called the neutral position.) Indeed it does seem to make sense that if the stiffer spine is in ...

How many different directions does a golf club head bounce?

Then try it with a club that is NOT properly spine aligned. The difference is amazing…. the shaft/clubhead bounces all over the place, in about 50 different directions.

Is the spine stiffer on a golf shaft?

First, every golf shaft has a “spine”, and that spine is stiffer than the rest of the circumference of the shaft. (Nobody should argue that the spine is not the stiffest part of the shaft, but proof can be seen when rotating a shaft on a frequency machine. You get a stiffer reading when the spine is oriented the direction the shaft is deflected.)

Why do you need to spine align your shafts?

It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing. These all seem like outcomes most golfers would want to have in their bag.

What is the spine orientation in golf?

Golf Shaft Spine Orientation. There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation. The swing plane means that the spine is perpendicular to ...

What is swing plane?

The swing plane means that the spine is perpendicular to the clubface and the droop plane is parallel with the clubface. This is a piece of advanced club builder knowledge that can make a difference to the feel and performance of your clubs.

What is pure shaft positioning?

PUREing is probably the most famous method of optimising shaft positioning and it was invented by a company called SST (Strategic Shaft Technologies). PURE stands for P lane of U niform RE peatability. This is a proprietary process that they claim is accurate to one degree.

What is a vice in golf?

A vice holds the grip-end of the club so that you can test the club. Although it important to point out here that this should be done without a grip on the club. From there you need to find the balance point that gives the club perfect oscillation, then you need to mark the shaft.

Do graphite shafts have spines?

Yes, they do. Graphite shafts have come a very long way in a short period of time thanks to new manufacturing methods and materials. Graphite shafts actually have two spines, creative called “S1 and S2” by the industry. These are the two stiffest oscillation points.

Is golf a hard sport?

Golf is a hard sport to play and many things are uncontrollable during a round. A gust of wind, a bad bounce or other bad breaks are out-with your control.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9