- Preparing the Dye. Fill up the mason jar with lukewarm or hot water, pour in the dye pack of your choice into the water, close up the mason ...
- Prepare the Disc for the Stencil. Apply acetone on cotton balls or paper towel and gently rub off any logos on the discs. ...
- Apply the Stencil. Cut out a large enough contact paper to cover the entire disc. ...
- Dye Your Disc. Take a strip of contact paper and apply the sticky side down on the back of the disc to create a handle to hold on ...
- Clean off the Excess. Run the disk under cold water, and remember to not touch the dye during this process. ...
How to stencil on a golf disc?
Slowly press down the stencil on the edges of the disc making sure that it adheres to all of the disc Wrap the stencil edges tightly around the sides of the disc. Use a hard-edged card like a credit card to rub the places. It will help you avoid air bubbles. The dye can go inside the air bubbles ruining your design 4. Dyeing the Golf Disc
How to dye a disc golf disc?
By using shaving cream as a medium, this is one of the most used methods to dye disc golf discs. I will be detailing how to dye a disc golf disc using shaving cream later in the article. It will show how simple dyeing a disc golf disc in shaving cream can be.
Can You stain a disc without a stencil dye?
You can do this part without doing a stencil dye as in Part I, or without removing the stamp from the disc. However, make sure to wipe down the disc first with toilet paper or something similar to remove any leftover oils from people’s hands. Otherwise, you’ll end up with undyed streaks all over your disc.
Can You dye plastic discs?
Remember one thing, cheap plastic discs won’t dye as you wish, you will need a high-quality disc (opaque or transparent) such as a Gold Line, Star, Opto Line, or Champion. We recommend avoiding DX style plastics. The shaving cream dyeing method doesn’t produce top-quality results, especially when you using a transparent disc.
How do you dye designs on disc golf discs?
In disc dyeing, the general idea is to use a medium—be it shaving cream, lotion, glue, or a number of other materials—to embed a synthetic dye into the plastic of a disc. The use of multiple layers and vinyl stencils allows for a huge range of possibilities.
How do you make custom dye in disc golf?
6:2328:31HOW TO DYE A DISC - What You Need and What You Need to KnowYouTubeStart of suggested clipEnd of suggested clipBut I'll show you how I do it but let's take a look at the dye I'm using only have three colorsMoreBut I'll show you how I do it but let's take a look at the dye I'm using only have three colors currently. It is rip dime or synthetic now really old-school viewers might remember my old electrical
Can you dye colored disc golf discs?
Premium plastic is the best disc golf plastic to dye and translucent plastic is the most difficult to dye. Also remember that the more curved your disc's flight plate, the more dye drips you'll experience and the more difficult it will be to place a template or design cut-out.
What kind of dye do you use to dye discs?
But a white disc would show the blue accurately. There are several dye powders and liquids that work well for dyeing. The most common would be iDye Poly, Rit Dyemore, and Pro Chem Disperse Dye. A great beginners method would be a simple shaving cream mound.
Can you use Rit dye to dye disc golf discs?
"For those of you who have missed our old formula that dyed golf balls, golf discs and lacrosse heads, Rit DyeMore once again allows you to dye these items bright, beautiful colors. And it can dye your 3D printed creations too."
How do you dye a disc a solid color?
Mix your dye, pour it in the upside down ultimate disc, place disc on top of dye (it should be floating), wait overnight, remove dyed disc, syringe out dye and place back into mason jar for future use.
Do you need acetone to dye discs?
6:2638:26HOW TO DYE Disc Golf Discs With GLUE - Full Tutorial - Disc Golf NerdYouTubeStart of suggested clipEnd of suggested clipIf you put acetone. Directly into a plastic container. From what i understand it is very likely thatMoreIf you put acetone. Directly into a plastic container. From what i understand it is very likely that it could melt through that. So definitely want to be careful with acetone as well it's flammable.
How long does it take lotion to dye discs?
How long do you let the disc sit in the bed? This really depends on a couple of different factors. Mainly what type of plastic are you dyeing, and what type of dye or dye mix are you using. A very general answer is about 8-12 hours for Star-like plastics and 24-48 hours for Champion-like plastics.
How long should disc sit in dye?
Place your disc top down on the shaving cream and give it a slight twist. Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.
How long does it take to dye a golf disc?
Slowly immerse the golf disc into the dye mixture. Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes.
How to get a golf stamp off?
Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp. Rub until the stamp comes off. Make sure there is no gooey residue including oil from people’s hands on the disc surface. In the case of shaving cream dyeing, this step is not necessary.
How long does it take to remove vinyl stencils?
Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes. Shake off any excess dye from the surface and let it sit aside for a couple of hours for the disc to strongly absorb the dye. 5. Peeling off the Vinyl. Slowly remove the stencil from the disc surface.
Do you have to remove stamps from a disc?
In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue.
Can you dye disc golf?
There are several methods to dyeing a disc golf disc, and the art of dyeing has been around for years. If you have a thing for custom discs, then dyeing them on your own according to your taste can help you achieve your desired result. When it comes to disc dyeing, you have plenty of options – you can dye your disc using only one color, ...
What is the medium used to dye disc golf?
The medium is the material that will be used to mix with the dye and is considered as the “bed” which will be used in transferring the dye to the disc. There are a lot of disc golf dye techniques that have been developed and I listed some below with the first two, probably the most popular method:
What is the best disc golf dye?
The iDye Poly is probably the best disc golf dye kit that you can use. Open the dye then remove the color intensifier that comes along with it because it will not be used in the whole process. Just take the powdered dye and cut the side slowly using a scissor.
What is worm dye used for disc golf?
Through the years, there are a lot of different dyes have been used to create a design in the disc. A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors.
What does it mean to customize a disc?
Customizing the disc to the player’s style and preference means adding a personal value and possibly help them improve their chances of winning. To others, it’s all about adding a personal flair to the equipment while also showcasing their sense of artistry in dyeing the disc.
Can a disc bleed after dyeing?
Because this type of discs, although they absorbed the dye well, can bleed easily a few weeks after dyeing.
How to get goo gone off a disc?
Spray some Goo-Gone onto the disc (about ten drops worth is enough), and rub it onto all of the spots with residue. Give the Goo-Gone a few seconds to penetrate, and the residue will rub right off with your thumb or a piece of toilet paper. With this done, wash the Goo-Gone off the disc and you’re ready for Part II.
What plastics won't dye?
Discs that won’t dye are the low-cost plastics, like DX plastics. For the best discs to dye, it’s a draw between MVP Discs’ Neutron plastic, and Latitude 64’s Gold Line plastic. Colors appear very bright on both of them, and it takes a very long time before the dye starts to fade.
What to use to stir shaving cream?
Plates– Need to be big enough to hold a disc. Cups. Skewers– These are used for stirring the shaving cream and tracing designs. You can use anything long and pointed. Shaving Cream– This holds the dye in position while it soaks into the disc. Syringe– You can get these at a pharmacy, usually behind the counter.
Do you need to rub shaving cream dye on a disc?
If you’re just doing a shaving cream dye, this part isn’t necessary, but make sure to rub down the disc well with toilet paper beforehand. The reason for this is that oil from people’s hands will be all over the surface of the disc, keeping the water-based dye from making contact.
Do DX plastics dye?
For both methods, you’ll need a disc, obviously: Cheap, DX style plastics don’t dye. In general, the opaque plastics like Star and Gold Line, and transparent plastics like Champion and Opto Line take dye.
Can you do a stencil dye without removing the stamp?
However, make sure to wipe down the disc first with toilet paper or something similar to remove any leftover oils from people’s hands.
The Process
A big part of the disc dyeing process is organization. If you’re well-organized you’re sure to see excellent results, and the less messy you are, the more your clothes and countertops will be saved from stains!
The Methods
There are plenty of methods out there for dyeing your discs that it can be hard to choose between them. But what method you choose all depends on what design you would like and how you want your disc to look.
The Prep
This may seem like common sense, but always clean your disc before you dye it. Any dirt or grease will affect the end result and leave your disc with imperfections.
Taking Care of Your Dyed Discs (Cleaning)
Cleaning your disc is simple, but just make sure you’ve left the dye on for long enough first.
ABOUT THE AUTHOR
Hi, everyone! My name is James, and I love sharing what I’ve learned about disc golf. It struck me as odd that such an amazing sport could be overlooked by so many people. To help spread the joys of disc golf and to provide some useful tips for improvement, I created the Disc Golf Mentor website. Thanks for stopping by!
About The Tutorial
Setting Up The Dye
- The iDye comes in dissolvable packets. Mix 1-liter water with one packet of iDye Next, add a few drops of liquid dishwash into the mixture. This will help reduce surface tension that ultimately prevents the formation of air bubbles Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp....
Stencil Dyeing
- 1. Choosing a Design
You can select any design you prefer. If could be anything from your favorite logo to any symbol, etc. Once you select a design, print out the B&W images of the design. Next, cut off a 12”x12” piece of vinyl paper Place the design underneath the vinyl paper and use the painter’s tape to hol… - 2. Preparing the Stencil
Once your stencil is ready, you need to cover the weeded part using the painter’s tape. This will help the stencil maintain its shape Flip the stencil upside down, so that its paper side is up. Gently scrub down the back so that the tape determinedly contacts the vinyl Next, peel the paper while …
Shaving Cream Dyeing
- In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue. 1. Preparing the Shaving Cream-Dye Mixture: You are required to prepare two mixtures of different consistencies – a base mixture and a dye mixture. For the base mixture: 1. Take a large mixing bowl and mix water with shaving cre…
Final Words
- The procedures mentioned are relatively easy, fun and, inexpensive. You can create any pattern you like. It will take you a couple of tries to perfect the procedure. These two methods are the prominent ways to dye your disc golf discs. If you have any doubt about any point that we have mentioned, you can ask us; we are happy to help.
Materials: What You Need to Dye A Disc
Step-By-Step Disc Dyeing Instructions
- Note that we highly recommend you read these instructions and the next section about common beginner mistakes thoroughly before you start dyeing.STEP 1: CLEAN YOUR DISC What to do 1. Scrub both sides of the disc with a sponge and soapy water until you feel no particulate and all dirt has been removed. Then rinse your disc and dry it completely. Not...
Common Beginner Disc Dyeing Mistakes
Let Us See!